Gfci
Elbows-Cplgs-Npls-Run Thrd
View:
Active Filters :
Part #:KLEIN RT210
-
Detects the most common wiring problems in standard and GFCI receptacles
Works on GFI outlets and confirms operation of the ground fault protective device
Conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Built to withstand a 6.6-foot (2m) drop
Operating temp 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
Nominal Voltage 110/125V AC at 50/60Hz in 3-wire outlet
$
17.54
Qty:
Part #:MULB 30351Z
- RAISED TYPE DIE CAST ZINC MATERIAL BAKED ALUMINUM FINISH BRONZE COLOR UL, CSA APPROVAL BOX MOUNTING VERTICAL MOUNTING POSITION (1) 1/2 INCH IPS TAPPED DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION (2) SCREWS, GASKET STANDARD PACKAGE 25
$
3.65
Qty:
Part #:MULB 30361Z
- RAISED TYPE DIE CAST ZINC MATERIAL BAKED ALUMINUM FINISH BRONZE COLOR UL, CSA APPROVAL BOX MOUNTING VERTICAL MOUNTING POSITION (3) 1/2 INCH IPS TAPPED DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION (2) SCREWS, GASKET STANDARD PACKAGE 25
$
4.58
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Part #:CONDUIT 1-1/2-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 15 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
32.82
Qty:
Part #:CONDUIT 2-IN-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
49.18
Qty:
Part #:CONDUIT 1/2XCLOSE-X1-1/8-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:CONDUIT 1/2X2-1/2-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 2-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
3.04
Qty:
Part #:CONDUIT 1/2X3-1/2-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
3.58
Qty:
Part #:CONDUIT 3/4X2-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.42
Qty:
Part #:CONDUIT 3/4X2-1/2-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 2-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
3.50
Qty:
Displaying: 1 - 24 of 44 Matching Items