Automation & Control
Active Filters :
- Main Menu: Automation & Control
Part #:WDM 1758260000
-
General ordering data
Type
ZQV 4N/10 GE
Order No.
1758260000
Version
Accessories, Cross-connector, 32 A
GTIN (EAN)
4032248169764
Qty.
20pc(s).
Availability
Stock article
Dimensions and weights
Width
2.8mm
Width (inches)
0.11inch
Height
59.7mm
Height (inches)
2.35inch
Depth
25.7mm
Depth (inches)
1.012inch
Net weight
6.95g
Temperatures
Continuous operating temp., min.
-60°C
Continuous operating temp., max.
130°C
$5.44
Qty:
Part #:HOR HE800THM100
- Description
MetalSmartStack I/O can only be stacked directly on the back of products supporting metal encased I/O models, such as Classic OCS, RCS, RX ruggedized controller, and Metal FOX. Products are sorted by commonality. All SmartStack I/O modules include spring-clamp style removable terminals except where noted.
$792.00
Qty:
Part #:WDM 7910210000
- Klippon® Connect with clamping yoke TechnologyThe high reliability and variety of designs of the terminalblocks with clamping yoke connections make planningeaser and optimises operational safety. Klippon®Connect provides a proven response to a range ofdifferent requirements.
$6.29
Qty:
Part #:WDM IES-150B
- FEATURES.............
Supports 5 ports 10/100 Base-T(X) Supports auto-negotiation and auto-MDI/MDI-X Supports store-and-forward transmission Supports flow control Compact size for easily installation Rigid IP-30 housing design DIN-Rail and wall mounting enabled
Qty:
$206.00
Qty:
Part #:GE IC694MDL660
- The 24 VDC Positive/Negative Logic Input module, IC694MDL660, provides 32 discrete input points. The inputs are positive or negative logic inputs and will operate at levels up to 30V. The inputs are arranged in four isolated groups of eight each group has its own common. Isolation is provided between the four groups of inputs, however each group of eight inputs is referenced to the same user common connection. Module MDL660 provides seven selectable input filter times. Filter times can be set from the programmer using the module&rsquos assigned output data references. This module can be used with either a Box-style (IC694TBB032) or Spring-style (IC694TBS032) front Terminal Block. The Terminal Block is ordered separately. 32 green LEDs indicate the ON/OFF status of points 1 through 32. The red/green TB LED is green when the module&rsquos removable terminal block is locked in place. It is red when the terminal block is not locked. The module also sends an Addition of Terminal Block or Loss of Terminal Block message to the RX3i CPU to report the terminal block status.
$394.00
Qty:
Part #:GE IC694CHS392
- PACSystems RX3iserial 10-slotExpansionBaseplate(serial bus only)
Baseplates RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs of yourapplication. The RX3i Universal baseplates support hot swap capability to reduce downtime.Expansion bases are available in 5 and 10 slot versions to maximize flexibility.
$362.00
Qty:
$179.00
Qty:
Part #:GE IC695PNC001
- Networks and Distributed I/O Systems The RX3i features a variety of communications options for distributed control and/or I/O. Choosefrom PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These highperformancecommunication modules are easy to install, quick to configure, and can be providedas &ldquoin rack&rdquo solutions to reduce engineering design cycles and system complexity. In addition,communication capabilities up to the SCADA level and down to the device (IED) level improveconnectivity, and time stamping capabilities deliver insight into operations to improve productivityand uptime.
PROFINET Controller (PNC)module, connects a PACSystemsRX3i controller to a high-speedPROFINET local area network.It enables the RX3i controller tocommunicate with IO-Devices onthe LAN.
$1,400.00
Qty:
Part #:GE IC200ALG230
- VersaMax Analog Input Module, 12 Bit Voltage/Current, 4 Channels
Analog Input Modules Analog input modules receive signals from current and voltage input devices. Modules require a carrierbase (IC200CHSxxx).
$321.00
Qty:
Part #:GE IC200ALG620
- VersaMax Analog Input Module, 16 Bit RTD, 4 Channel
RTD and Thermocouple Modules Specialty modules are available for RTD and Thermocouple inputs. Modules require a carrier base(IC200CHSxxx).
$550.00
Qty:
Part #:GE IC200CHS003
- VersaMax I/O Carrier, VersaMax I/O Carrier, Connector Style. Interposing Barrier A connecting cable Style (Requires (IC200CBL1xxx) and IC200CHS003 base interposing base (IC200CHS011, and connecting CHS012, CHS014, CHS015, cable IC200CBL1xxx) IC200CHS1xx or IC200CHS2xx) are required. This carrier can be used with all VersaMax I/O modules EXCEPT the following, due to their high isolation requirements IC200MDL144 Input 240 VAC 4 Point Isolated Module IC200MDL244 Input 240 VAC 8 Point Isolated Module IC200MDD850 Mixed 240 VAC Isolated 4 Point / Output Relay 2.0A Isolated 8 Point Module
$74.00
Qty:
Part #:GE IC200CHS022
- VersaMax Compact I/O Carrier, Local Box Clamp Connection Style
Carriers VersaMax provides several types of snap-together I/O carriers and interposing terminalsto provide maximum wiring flexibility, as well as module hot insertion and removal. VersaMaxcarriers support IEC box-style, spring-style, and barrier-style terminals and are also available assnap-on auxiliary terminal strips and interposing terminals that can be mounted separately andconnected to a connector-style carrier by an I/O cable.
$82.00
Qty:
Part #:GE IC200DBI001
- Remote I/O DeviceNet Network Interface Unit (Slave)
Remote I/O Units A Remote I/O Unit connects VersaMax I/O modules to a host PLC or computer via a variety ofnetworks. This makes it easy to include VersaMax I/O in the innovative PROFINET interface, as wellas Genius, PROFIBUS-DP, DeviceNet, or other Ethernet installations. Together, the Remote I/O Unitand its modules form an I/O station capable of providing up to 256 points of I/O.
$410.00
Qty:
Part #:GE IC200MDL240
- VersaMax Discrete Input Module, 120 VAC Positive Logic, 16 points
Discrete Input Modules Discrete input modules receive signals from input devices such as sensors, pushbuttons, and switchesthat can have two states on or off, open or closed. Modules require a carrier base (IC200CHSxxx).
$244.00
Qty:
Part #:GE IC200MDL640
- VersaMax Discrete InputModule, 24 VDCPos/Neg Logic, 16 points
Discrete Input Modules Discrete input modules receive signals from input devices such as sensors, pushbuttons, and switchesthat can have two states on or off, open or closed. Modules require a carrier base (IC200CHSxxx).
$156.00
Qty:
Part #:GE IC200MDL742
- VersaMax Discrete Output Module, 24 VDC Positive Logic 0.5A with ESCP, 32 points
Discrete Output Modules Discrete output modules send control signals to devices such as contactors, indicator lamps, andinterposing relays that can also have two states. Modules require a carrier base (IC200CHSxxx).
$420.00
Qty:
Part #:GE IC200PWR001
- 24 VDC Power Supply
Power Supplies VersaMax Power Supply modules snap onto any VersaMax CPU or Network Interface Unit or onto apower supply booster carrier. Each power supply can be used as the main power source formodules in the I/O station, or as a source of supplemental power for larger I/O applications.
$59.00
Qty:
Part #:GE IC200PWR002
- 24 VDC Power Supply with Expanded 3.3 V
Power Supplies VersaMax Power Supply modules snap onto any VersaMax CPU or Network Interface Unit or onto apower supply booster carrier. Each power supply can be used as the main power source formodules in the I/O station, or as a source of supplemental power for larger I/O applications.
$71.00
Qty:
Part #:GE IC200UEM001
- Ethernet module
Micro 20, Micro 40 and Micro 64 Port 2 Communication Options The VersaMax Micro 20, Micro 40 and Micro 64 Port 2 is modular by design and enables the userto select a wide range of communications options. The user can select RS-232, RS-485, Ethernetor USB. The RS-232 and RS-485 also come with two analog input channels (0 to 10 VDC, 10 bit).Port 2 also supports Memory Module Board that enables the user to download logic and settingswithout a PC.
$190.00
Qty:
Part #:GE IC220DBI001
- DeviceNet NetworkInterface Unit
Network Interface Modules An I/O Network Interface Unit connects VersaPoint I/O modules to a host PLC or computer via avariety of networks, which makes it easy to include VersaPoint I/O in PROFIBUS-DP, Ethernet orDeviceNet installations. Together, the NIU is capable of handling up to 63 modulesin one node.
$511.00
Qty:
Part #:GE IC693ACC307
-
IC693ACC307
I/O BUS TERMINATOR PLUG
25PIN
FOR 90-30 SERIES
$104.00
Qty:
Part #:GE IC693ALG221
- Analog Input, Current, 4 Channel
Analog I/O Modules (Input) GE offers easy-to-use analog modules for control processes such as flow, temperatureand pressure.
$1,800.00
Qty:
Part #:GE IC693ALG391
- Analog Output, Current/Voltage, 2 Channel
Analog I/O Modules (Output) GE offers easy-to-use analog modules for control processes such as flow, temperatureand pressure.
$1,745.00
Qty:
Displaying: 1 - 24 of 78 Matching Items