Emt Fittings
Class Rk1
View:
Active Filters :
Part #:VICTOR 10747-S
- STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 125 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.12
Qty:
Part #:ARL EMT50
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 0.84 INCH DIAMETER 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.15
Qty:
Part #:ARL EMT75
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.056 INCH DIAMETER 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.22
Qty:
Part #:ARL EMT100
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.28 INCH DIAMETER 100 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.66
Qty:
Part #:ARL EMT125
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.66 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
1.15
Qty:
Part #:ARL EMT250
- 1.225 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 3.062 INCH DIAMETER 25 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
4.77
Qty:
Part #:ARL EMT400
- 1.233 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 4.815 INCH DIAMETER 25 STANDARD PACKAGE 4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
8.61
Qty:
Part #:BUSS LPS-RK-50SP
- CLASS RK1 TYPE 5.5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VOLT AC, 300 VOLT DC VOLTAGE RATING 1.06 INCH DIAMETER 300 KILOAMP SYMMETRICAL, 100 KILOAMP (DC) INTERRUPTING RATING 50 AMP CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 10 SECOND TIME DELAY AT 500 PERCENT RATED LOAD, DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND CONTACT MATERIAL SILVER PLATED APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH LPS-RK MODEL
$
106.36
Qty:
Part #:TB 5223
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:MADISON LG-141-2
- DIE-CAST ZINC, ALUMINUM COVER, NEOPRENE GASKET MATERIAL RIGID CONDUIT USED ON THREADED FEMALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
4.88
Qty:
Part #:STL-CTY TL202SC
- DIE-CAST ZINC MATERIAL 1.24 INCH DIA SIZE EMT CONDUIT USED ON SET SCREW INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEG BEND ANGLE TL MODEL
Part #:STL-CTY TC211SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-1/4 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1 INCH DIAMETER 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC212SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-11/32 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-5/32 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC213SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-29/64 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-15/32 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC223SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-9/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-27/64 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
Part #:STL-CTY TC224SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-15/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-13/16 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
4.18
Qty:
Part #:STL-CTY TC225SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-9/32 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-3/64 INCH DIAMETER 40 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
5.57
Qty:
Part #:STL-CTY TC226SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-33/64 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-17/32 INCH DIAMETER 20 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
6.97
Qty:
Part #:CONDUIT 3-IN
- ALUMINUM MATERIAL UL APPROVAL 246.3 LB PER 100 FT WEIGHT 50 FT PER BUNDLE STANDARD PACKAGE 3 INCH TRADE SIZE 3 TRADE SIZE IN INCH THREADED END STYLE TYPE CODE ARC
$
31.47
FT
Qty:
Part #:CONDUIT 2-1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 2.875 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 559 POUND PER 100 FOOT WEIGHT 2-1/2 INCH TRADE SIZE 0.193 INCH WALL THICKNESS THREADED END STYLE
$
36.14
FT
Qty:
Part #:CONDUIT 3/4
- ALUMINUM MATERIAL UL APPROVAL 37.4 LB PER 100 FT WEIGHT 100 FT PER BUNDLE STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 TRADE SIZE IN INCH 3/4 TRADE SIZE - FRACTIONAL THREADED END STYLE TYPE CODE ARC
$
4.83
FT
Qty:
Part #:CONDUIT 1-1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.9 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 263 POUND PER 100 FOOT WEIGHT 1-1/2 INCH TRADE SIZE 0.138 INCH WALL THICKNESS THREADED END STYLE
$
12.20
FT
Qty:
Part #:CONDUIT 1-1/4-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.66 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 218 POUND PER 100 FOOT WEIGHT 1-1/4 INCH TRADE SIZE 0.133 INCH WALL THICKNESS THREADED END STYLE
$
16.04
FT
Qty:
Part #:CONDUIT 1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 0.84 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 82 POUND PER 100 FOOT WEIGHT 1/2 INCH TRADE SIZE 0.104 INCH WALL THICKNESS THREADED END STYLE
$
6.68
FT
Qty:
Displaying: 1 - 24 of 30 Matching Items