Fastening Hardware - Miscellaneous
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Active Filters :
Part #:CARLON E989RRR-UPC
- MOLDED PPO THERMOPLASTIC MATERIAL 6 INCH 6 INCH 6 INCH DIRECT BURIAL INSTALLATION UL, CSA APPROVAL NEMA 4/4X/6P ENCLOSURE SCREW COVER TYPE 8 STANDARD PACKAGE
Part #:CARLON E381D-CAR
- T TYPE NON-METALLIC MATERIAL GRAY COLOR 1/2 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL APPROVAL SURFACE MOUNTING FEET MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION ENVIRONMENTAL CONDITIONS CORROSION RESISTANT
Part #:ARL FS8141
- PLASTIC MATERIAL TEXTURED FINISH 3.312 INCH 3.312 WIDTH IN INCH 5.093 INCH 5.093 HEIGHT IN INCH 2.056 INCH 2.056 DEPTH IN INCH 1 GANG(S) UL APPROVAL 18.6 CU INCH CAPACITY 1/2 INCH LAP STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN FS MODEL
$
7.05
Qty:
Part #:ARL MB8
- CEILING FAN/FIXTURE TYPE 0.74 INCH .74 DEPTH IN INCH 8 DIAMETER IN INCH ROUND SHAPE 10 APPROVAL 8 INCH DIAMETER (2) #10 X 3 INCH WOOD SCREW, (1) #8 X 1 1/2 INCH WOOD SCREW MOUNTING UL, CSA STANDARD PACKAGE 6.1 CU INCH CAPACITY DEPTH IN INCH - UOM IN DIAMETER IN INCH - UOM IN
$
22.56
Qty:
Part #:PAND SGTM2S8-C
- NYLON 6.6 MATERIAL NATURAL COLOR 0.63 INCH 0.43 INCH 0.28 INCH MINIATURE TIE, INTERMEDIATE TIE, STANDARD TIE APPROVAL 100 STANDARD PACKAGE #8 SCREW MOUNTING HOLE SIZE SUPER-GRIP[T], PANDUIT[R] BRAND
$
0.54
Qty:
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:S-STRUT 701-3/4
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Displaying: 1 - 9 of 9 Matching Items