Textured
Goldgalv
Part #:ARL FS8141
- PLASTIC MATERIAL TEXTURED FINISH 3.312 INCH 3.312 WIDTH IN INCH 5.093 INCH 5.093 HEIGHT IN INCH 2.056 INCH 2.056 DEPTH IN INCH 1 GANG(S) UL APPROVAL 18.6 CU INCH CAPACITY 1/2 INCH LAP STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN FS MODEL
$
7.05
Qty:
closeout
Part #:CARLON E9G2DDN-CAR
- CLOSEOUTS Only 7 Left!
- POLYCARBONATE MATERIAL 4-27/34 INCH W X 4-27/34 INCH H SIZE TEXTURED FINISH GRAY COLOR 2 GANG(S) UL, CSA APPROVAL BOX/DEVICE MOUNT MOUNTING HORIZONTAL MOUNTING POSITION DOUBLE LID LID TYPE (2) DUPLEX RECEPTACLE DEVICE OPENING APPLICATION OUTDOOR, WET/DAMP LOCATION
Part #:S-STRUT A1200HS-10
- METAL FRAMING, SINGLE TYPE STRIP STEEL MATERIAL GOLDGALV FINISH 10 FT 1.625 INCH 1.625 INCH SLOTTED CONFIGURATION 12 GAUGE THICKNESS COLD FORMED HOT ROLLED PICKLED PROCESS 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 1-1/8 INCH W HOLE/SLOT SIZE 0.557 SQ INCH CROSS SECTION AREA
Part #:S-STRUT B1400HS-10
- METAL FRAMING, SINGLE TYPE STRIP STEEL MATERIAL GOLDGALV FINISH 10 FT 1.625 INCH 0.813 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED HOT ROLLED PICKLED PROCESS 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 1-1/8 INCH W HOLE/SLOT SIZE 0.28 SQ INCH CROSS SECTION AREA SUPERSTRUT[R] BRAND
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:S-STRUT AP232
- U POST, SQUARE BASE TYPE STEEL MATERIAL GOLDGALV FINISH 3-1/2 INCH POST HEIGHT 1 CHANNEL(S) CENTERED, OFFSET CHANNEL POSITION 4 PAD MOUNTING HOLE(S) 3/4 INCH PAD MOUNTING HOLE SIZE 6 CHANNEL MOUNTING HOLE(S) 200 MODEL
closeout
Part #:S-STRUT 700-1-STR
- CLOSEOUTS Only 144 Left!
- EMT CONDUIT TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV FINISH 1.163 INCH OUTER DIAMETER 2-PIECE CONSTRUCTION 750 LB LOAD RATING 1 INCH TRADE SIZE APPROVAL CSA 700 MODEL
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Displaying: 1 - 9 of 9 Matching Items