Electrical Insulating, No Adhesive
Jacketing, Insulating
View:
Active Filters :
Part #:VICTOR 10727-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 50 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 2 HOLE SNAP ON 107 MODEL
$
1.22
Qty:
Part #:VICTOR 10728-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 50 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 2 HOLE SNAP ON 107 MODEL
$
1.46
Qty:
Part #:VICTOR 10730-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 25 PER CARTON STANDARD PACKAGE 3 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 2 HOLE SNAP ON 107 MODEL
$
1.98
Qty:
Part #:VICTOR 10733-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 20 PER CARTON STANDARD PACKAGE 5 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 2 HOLE SNAP ON 107 MODEL
$
3.37
Qty:
closeout
Part #:TB 126
- CLOSEOUTS Only 29 Left!
- THREADED FEMALE TYPE STEEL MATERIAL 19/32 INCH RIGID CONDUIT/IMC USED ON UL, CSA APPROVAL 2-5/32 INCH DIAMETER 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
Part #:VICTOR 10014-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 3/4 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.35
Qty:
Part #:VICTOR 10015-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.093 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.53
Qty:
Part #:VICTOR 10016-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 250 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.093 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.98
Qty:
Part #:VICTOR 10043-S
- STEEL MATERIAL 5/8 INCH EMT CONDUIT USED ON 1000 PER CARTON STANDARD PACKAGE 1/2 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.22
Qty:
Part #:VICTOR 10045-S
- STEEL MATERIAL 3/4 INCH EMT CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.34
Qty:
Part #:VICTOR 10715-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 250 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.13
Qty:
Part #:VICTOR 10716-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 125 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.61
Qty:
Part #:VICTOR 10729-S
- STEEL MATERIAL 1 INCH RIGID CONDUIT USED ON 50 PER CARTON STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 2 HOLE SNAP ON 107 MODEL
$
1.55
Qty:
Part #:VICTOR 19105-S
- STEEL MATERIAL 9/16 INCH 1 HOLE SNAP ON INSTALLATION (2) 14 AWG, (3) 14 AWG, (2) 12 AWG, (3) 12 AWG, 3/8 INCH (BX FLEX CABLE) CABLE SIZE 1000 PER CARTON STANDARD PACKAGE 7/32 INCH HOLE SIZE BX FLEXIBLE CABLE
$
0.15
Qty:
Part #:3M 33+SUPER-3/4X66FT
- INSULATING, JACKETING, HARNESSING TYPE PVC TAPE, RUBBER RESIN ADHESIVE MATERIAL BLACK FINISH 66 FOOT 3/4 INCH UL 510, CSA C22.2 APPROVAL LOW AND HIGH VOLTAGE BUS, PROTECTIVE JACKETING AND HARNESSING, INDOOR, OUTDOOR APPLICATION 600 VOLT VOLTAGE RATING 7 MIL THICKNESS 0 TO 221 DEG F TEMPERATURE RATING 1150 VOLT PER MIL DIELECTRIC STRENGTH SCOTCH[R], SUPER 33+[TM] BRAND ROHS COMPLIANT BACKING STRENGTH 15 POUND PER INCH APPLICABLE STANDARD A-A-55809 33 MODEL
$
11.46
Qty:
Part #:3M 2510-3/4X60FT
-
Straight-cut, woven, cotton-cloth backing is oil-primed and coated with yellow, electrical, insulating varnish
Excellent dielectric strength
Suitable for insulating bus bars, motor leads and service drop connections
Wide and narrow width electrical tape available (0.75 in &ndash 2 in.)
Temperature stable with an operating range of 32°F (0°C) to 220°F (105°C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
ASTM Approved and RoHS 2011/65/EU Compliant
Yellow, varnish coated cotton cloth, no adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
Scotch® Tape 2510 has a straight-cut, woven cotton, cambric fabric backing that provides high tensile strength and ruggedness. This fabric is coated and oil-primed with yellow electrical insulating varnish. This moisture-resistant tape offers excellent dielectric strength with cut-through and puncture resistance. ASTM Approved and RoHS 2011/65/EU Compliant.
$
59.78
Qty:
closeout
$
3.10
Qty:
closeout
$
4.66
Qty:
$
0.76
Qty:
$
0.86
Qty:
Part #:TB H075TB
- BULKHEAD, TAPERED FEMALE THREADED TYPE ZINC (BODY/LOCKNUT), BUNA-N (SEALING RING) MATERIAL 1-21/32 INCH DIA X 1-19/32 INCH L SIZE RIGID CONDUIT/IMC USED ON UL, CSA APPROVAL 3/4 INCH TRADE SIZE NEMA 3R/4/13, DUSTTIGHT, WATERTIGHT, HAZARDOUS LOCATION THERMOPLASTIC INSULATED THROAT TYPE TEMPERATURE RATING 105 DEG C
Part #:TB 1350
- HOT DIP GALVANIZED MALLEABLE IRON MATERIAL 3 INCH 7/8 INCH EMT/IMC/RIGID METAL CONDUIT USED ON CSA APPROVAL 100 STANDARD PACKAGE 1/2 INCH, 3/4 INCH, 1 INCH TRADE SIZE
Part #:TB 675
- THREADED THREE PIECE TYPE ZINC ELECTROPLATED CHROMATE COATED MALLEABLE IRON BUSHING/CASE, STEEL/MALLEABLE IRON RING MATERIAL 1-1/4 INCH IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 1-15/32 INCH DIAMETER 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE TIGHT ERICKSON[R] BRAND
Part #:TB 676
- 3-PIECE, THREADED TYPE ELECTRO ZINC PLATED CHROMATE COATED MALLEABLE IRON MATERIAL 1-13/32 INCH IMC/RIGID CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-9/16 INCH DIAMETER 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETETIGHT, RAINTIGHT ERICKSON[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION NEMA FB-1, H-28, A-A-50553, NFPA 70
Displaying: 1 - 24 of 126 Matching Items