Rigid Conduit Fittings - Steel
Receptacles & Surge Protectors
View:
Active Filters :
closeout
Part #:TB 373
- CLOSEOUTS Only 4 Left!
- BULKHEAD, TAPERED FEMALE THREADED TYPE ZINC ELECTROPLATED CHROMATE COATED MALLEABLE IRON HUB, ZINC ELECTROPLATED CHROMATE COATED HARDENED STEEL LOCKNUT/SCREW, NEOPRENE O-RING MATERIAL 2-9/16 INCH DIA SIZE RIGID CONDUIT/IMC USED ON UL 514B, CSA C22.2 APPROVAL LOCKNUT BONDING/GROUNDING SCREW 1-1/8 INCH TRADE SIZE DUSTTIGHT, RAINTIGHT, WATERTIGHT, HAZARDOUS LOCATION NYLON INSULATED THROAT TYPE APPLICABLE STANDARD NFPA 70, JIC EGP1, JIC EMP 1, A-A-50553 ENCLOSURE NEMA FB-1 MAXIMUM WALL THICKNESS 5/16 INCH TEMPERATURE RATING 105 DEG C
Part #:TB 678
- THREADED THREE PIECE TYPE ZINC ELECTROPLATED CHROMATE COATED MALLEABLE IRON BUSHING/CASE, STEEL/MALLEABLE IRON RING MATERIAL 1-13/16 INCH IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 2-3/8 INCH DIAMETER 25 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE TIGHT ERICKSON[R] BRAND
Part #:TB 679
- THREADED THREE PIECE TYPE ZINC ELECTROPLATED CHROMATE COATED MALLEABLE IRON BUSHING/CASE, STEEL/MALLEABLE IRON RING MATERIAL 1-31/32 INCH IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 2-5/8 INCH DIAMETER 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE TIGHT ERICKSON[R] BRAND
Part #:TB 845
- BUSHED, THREADED MALE/HEX HEAD TYPE DURA-PLATE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 2-1/32 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE CHASE[R] BRAND
Part #:TB 846
- BUSHED, THREADED MALE/HEX HEAD TYPE DURA-PLATE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 2-3/8 INCH DIAMETER 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE CHASE BRAND
Part #:TB 1251
- THREADED HEX HEAD SHOULDER TYPE DURA PLATED MALLEABLE IRON MATERIAL 1-3/8 INCH DIA X 11/16 INCH L SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE UL, CSA APPROVAL 100 STANDARD PACKAGE APPLICABLE STANDARD NEC 501-4(B), NEC 502-4(A), NEC 502-4(B), NEC 503-3(A), NEC 503-3(B)
Part #:TB 1277
- 1-HOLE TYPE HOT DIP GALVANIZED MALLEABLE IRON MATERIAL 2-9/16 INCH 11/16 INCH 1-7/32 INCH RIGID/IMC CONDUIT USED ON CSA APPROVAL 500 PER OUTER PACK STANDARD PACKAGE 3/4 INCH TRADE SIZE 1/4 INCH HOLE/BOLT SIZE
Part #:TB 1944
- BUSHED, THREADED MALE/HEX HEAD TYPE DURA-PLATE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL, CSA APPROVAL 1-11/16 INCH DIAMETER 100 STANDARD PACKAGE 1 INCH TRADE SIZE NYLON INSULATED THROAT TYPE 19 MODEL
Part #:TB H100-TB
- TAPERED FEMALE THREADED, BULKHEAD TYPE DIE-CAST ZINC (BODY/LOCKNUT), NITRILE (SEALING RING) MATERIAL 2 INCH DIAMETER X 1-13/16 INCH HEIGHT SIZE RIGID/IMC CONDUIT USED ON UL, CSA APPROVAL BONDING LOCKNUT 1 INCH TRADE SIZE NEMA 3R/4/13 THERMOPLASTIC INSULATED THROAT TYPE ENCLOSURE TYPE CLASS II GROUP E F G, CLASS III TEMPERATURE RATING 0 TO 105 DEG C APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC
Part #:TB H125-TB
- TAPERED FEMALE THREADED, BULKHEAD TYPE DIE-CAST ZINC (BODY/LOCKNUT), NITRILE (SEALING RING) MATERIAL 2-3/8 INCH DIAMETER X 1-7/8 INCH HEIGHT SIZE RIGID/IMC CONDUIT USED ON UL, CSA APPROVAL BONDING LOCKNUT 1-1/4 INCH TRADE SIZE NEMA 3R/4/13 THERMOPLASTIC INSULATED THROAT TYPE ENCLOSURE TYPE CLASS II GROUP E F G, CLASS III TEMPERATURE RATING 0 TO 105 DEG C APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC
Part #:TB H050-TB
- TAPERED FEMALE THREADED, BULKHEAD TYPE DIE-CAST ZINC (BODY/LOCKNUT), NITRILE (SEALING RING) MATERIAL 1-7/16 INCH DIAMETER X 1-9/16 INCH HEIGHT SIZE RIGID/IMC CONDUIT USED ON UL, CSA APPROVAL BONDING LOCKNUT 1/2 INCH TRADE SIZE NEMA 3R/4/13 THERMOPLASTIC INSULATED THROAT TYPE ENCLOSURE TYPE CLASS II GROUP E F G, CLASS III TEMPERATURE RATING 0 TO 105 DEG C APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC
Part #:HWS RR15W
- SMOOTH FACE DUPLEX TYPE THERMOPLASTIC (BASE) MATERIAL WHITE COLOR 5-15R CONFIGURATION 3 WIRE(S) RESIDENTIAL GRADE UL, CSA APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) PUSH, SIDE WIRING HOMESELECT[T], HUBBELL[R] BRAND OPERATING TEMPERATURE -20 TO 60 DEG C RR MODEL
$
2.70
Qty:
Part #:HWS RR151I
- SINGLE TYPE THERMOPLASTIC (BASE) MATERIAL IVORY COLOR 5-15R CONFIGURATION 3 WIRE(S) RESIDENTIAL GRADE UL, CSA APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) SIDE WIRING HOMESELECT[T], HUBBELL[R] BRAND OPERATING TEMPERATURE -20 TO 60 DEG C RR MODEL
$
11.68
Qty:
Part #:HWS RR151W
- SINGLE TYPE THERMOPLASTIC (BASE) MATERIAL WHITE COLOR 5-15R CONFIGURATION 3 WIRE(S) RESIDENTIAL GRADE UL, CSA APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) SIDE WIRING HOMESELECT[T], HUBBELL[R] BRAND OPERATING TEMPERATURE -20 TO 60 DEG C RR MODEL
$
11.68
Qty:
Part #:HWS RR450
- SINGLE DRYER, SINGLE RANGE TYPE THERMOPLASTIC MATERIAL BLACK COLOR 14-50R CONFIGURATION 4 WIRE(S) UL, CSA APPROVAL 125/250 V VOLTAGE RATING SURFACE MOUNTING 50 AMPERE CURRENT RATING GROUNDING 3 POLE(S) 2.5 INCH FACE OUTER DIAMETER HOMESELECT[T], HUBBELL[R] BRAND
$
64.06
Qty:
Part #:HWS RR435P
- ANGLED TYPE BLACK COLOR 14-30P, 14-50P CONFIGURATION 4 WIRE(S) UL, CSA APPROVAL 125/250 VOLT VOLTAGE RATING 30/50 AMP CURRENT RATING NON-GROUNDING 3 POLE(S) TRADESELECT[R] BRAND APPLICATION RESIDENTIAL
$
81.90
Qty:
Part #:EGS HUBG200DN
- THREADED TYPE DIE-CAST ZINC (BODY/NUT), BUNA-N (O-RING), MILD STEEL (GROUND SCREW) MATERIAL 3.25 INCH DIAMETER X 2.12 INCH LENGTH SIZE RIGID/IMC CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL GROUNDING SCREW 2 INCH TRADE SIZE NEMA 2/3/3R/4/4X/5/12/13, WATER TIGHT, CORROSION RESISTANT POLYCARBONATE INSULATED THROAT TYPE ENCLOSURE TYPE CLASS I DIV 2, CLASS II DIV 1 AND 2, CLASS III APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC, NEMA FB-1 HUBG MODEL
$
48.86
Qty:
Part #:PAND SBC350-1
- COPPER MATERIAL 4/0 AWG STRANDED MIN. RUN CONDUCTOR SIZE 350 MCM MAX. RUN CONDUCTOR SIZE 4/0 AWG STRANDED MIN. TAP CONDUCTOR SIZE 350 MCM MAX. TAP CONDUCTOR SIZE SPLIT BOLT INSTALLATION COPPER CONDUCTOR MATERIAL UL, CSA APPROVAL 600 V VOLTAGE RATING PANDUIT[R] BRAND STANDARD PACKAGE 1 SBC MODEL
$
73.63
Qty:
Part #:KLRK C37
- ELECTRO ZINC CHROMATE SEALANT ELECTROSTATIC POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, 316 STAINLESS STEEL COVER SCREW/WASHER MATERIAL 7 7/16 INCH L X 1 7/8 INCH W X 1 15/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL SCREW ON COVER TYPE STRAIGHT HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND 7 MODEL
$
36.58
Qty:
Part #:KLRK LB37
- ELECTRO ZINC CHROMATE SEALANT ELECTROSTATIC POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, 316 STAINLESS STEEL COVER SCREW/WASHER MATERIAL 6 5/16 INCH L X 3 INCH W X 1 15/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL SCREW ON COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND 7 MODEL
$
35.16
Qty:
Part #:KLRK LR37
- ELECTRO ZINC CHROMATE SEALANT ELECTROSTATIC POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, 316 STAINLESS STEEL COVER SCREW/WASHER MATERIAL 6 5/16 INCH L X 1 7/8 INCH W X 3 1/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LR CONFIGURATION 2 HUB(S) UL, CSA APPROVAL SCREW ON COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND 7 MODEL
$
35.16
Qty:
Part #:KLRK T37
- ELECTRO ZINC CHROMATE SEALANT ELECTROSTATIC POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, 316 STAINLESS STEEL COVER SCREW/WASHER MATERIAL 7 5/8 INCH L X 2 1/4 INCH W X 3 1/4 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL SCREW ON COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND 7 MODEL
$
50.66
Qty:
Part #:KLRK 370
- SCREW TYPE GALVANIZED STAMPED STEEL MATERIAL 5 INCH UL, CSA APPROVAL 1 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL 316 STAINLESS STEEL WIDTH 1 3/4 INCH HEIGHT 5/16 INCH
$
12.22
Qty:
Part #:PAND PNL-4-C
- SET SCREW TYPE CAST COPPER MATERIAL 1.25 INCH OVERALL LENGTH 14 AWG SOLID MIN. CONDUCTOR SIZE 4 AWG STRANDED MAX. CONDUCTOR SIZE COPPER CONDUCTOR MATERIAL UL, CSA APPROVAL 1 CONDUCTOR(S) 1/4 INCH STUD SIZE 0.53 INCH W X 0.14 INCH THK PAD SIZE 1 PAD HOLE(S) STRAIGHT PAD TYPE SLOT SCREW TYPE PANDUIT[R] BRAND STANDARD PACKAGE 100 PNL MODEL
$
5.58
PC
Qty:
Displaying: 121 - 144 of 215 Matching Items