Solderless Connectors - Small Terminals & Connectors
Push Button Components
View:
Active Filters :
Part #:GE P9CPNNG
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE BLACK COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
closeout
Part #:GE P9CPNVG
- CLOSEOUTS Only 1 Left!
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CPNRS
- STANDARD, ROUND EXTENDED TYPE 22.5 MM SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CER4RN
- MUSHROOM 40 MILLIMETER DIAMETER TYPE 22.5 MILLIMETER SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL CONTACT RATING 600 VOLT AC 10 AMP, 300 VOLT DC 2.5 AMP P9 MODEL
$
38.50
Qty:
closeout
Part #:GE P9CPLVGD
- CLOSEOUTS Only 1 Left!
- ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
Part #:GE P9CPLGGD
- ROUND FLUSH TYPE 22.5 MM SIZE YELLOW COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
closeout
Part #:CARLON E9G2DDN-CAR
- CLOSEOUTS Only 7 Left!
- POLYCARBONATE MATERIAL 4-27/34 INCH W X 4-27/34 INCH H SIZE TEXTURED FINISH GRAY COLOR 2 GANG(S) UL, CSA APPROVAL BOX/DEVICE MOUNT MOUNTING HORIZONTAL MOUNTING POSITION DOUBLE LID LID TYPE (2) DUPLEX RECEPTACLE DEVICE OPENING APPLICATION OUTDOOR, WET/DAMP LOCATION
Part #:PAND JN218-216-MN
- INSULATED TYPE (2) #22 MIN. WIRE COMBINATION SIZE (2) #16 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.32
Qty:
Part #:PAND JN418-212-C
- INSULATED TYPE (4) #18 MIN. WIRE COMBINATION SIZE (2) #12 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 100 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.89
Qty:
Part #:CRC 02085
- SILICONE TYPE OPAQUE WHITE COLOR ELECTRICAL PANEL, OUTDOOR LIGHTING, SCOREBOARD, TRAFFIC LIGHT, HIGH VOLTAGE POLE, TRANSFORMER, DISCONNECT, SWITCHING MECHANISM, ELECTRICAL CONTACT, SPARK PLUG, BATTERY TERMINAL, FASTENER, O-RING, RUBBER AND PLASTIC PART APPLICATION -70 TO 400 DEG F TEMPERATURE RATING PRESSURIZED TUBE WITH SELECT-A-BEAD NOZZLE CONTAINER TYPE 3.3 OUNCE CONTAINER SIZE NLGI 2 NLGI NUMBER ROHS COMPLIANT UNIT PACKAGE 6 OUNCE BASE TYPE SILICONE ODOR MILD DIELECTRIC STRENGTH GREATER THAN 450 MILLIVOLT BOILING POINT GREATER THAN 392 DEG F MELTING/FREEZING POINT GREATER THAN 572 DEG F PROPELLANT TYPE NITROGEN SPECIFIC GRAVITY 0.97 VAPO
$
37.24
Qty:
Part #:CRC 02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3
$
19.28
Qty:
Part #:CRC 02205
- APPLICATION CONTACT, METAL SWITCH, MOTOR, RELAY, GENERATOR, EDGE CONNECTOR, BUSS BAR, CIRCUIT BREAKER, SCALE AND SENSORS COLOR CLEAR COMPOSITION HFC NT[T], CRC[R] BRAND
$
48.28
CA
Qty:
Part #:CRC 14055
- RTV SILICONE TYPE CLEAR COLOR MIL-A-46106, TT-S-00230C, TT-S-001543A, FDA 21 CFR-175.105 APPLICABLE STANDARD BONDING, PROTECTION AND WATERPROOFING IN HVAC, ELECTRICAL, CONSTRUCTION, METAL WORKING, FILLING GAPS BETWEEN MATING PART, GEARBOX, PUMP, MOTOR AND GENERAL GASKET SEALING APPLICATION -76 TO 400 DEG F TEMPERATURE RATING TUBE CONTAINER TYPE 8 OUNCE CONTAINER CAPACITY 24 HOUR (FULL CURE TIME) SETTING TIME PHYSICAL STATE PASTE ODOR ACETIC ACID BOILING POINT 680 DEG F FLASH POINT 135 DEG C SPECIFIC GRAVITY 1.007 VOC CONTENT 3 PERCENT
$
43.68
Qty:
Part #:CRC 14170
- CLEAR COLOR AIR TOOL, MECHANICAL BRAKE, CLUTCH, CHAIN, WIRE ROPE, MOTOR, DIE, MOLD, PART, BEARING, GENERATOR AND COMPRESSOR APPLICATION BOTTLE CONTAINER TYPE 20 OUNCE CONTAINER CAPACITY 14170 MSDS NUMBER 170 DEG F FLASH POINT PETROLEUM DISTILLATE, CARBON DIOXIDE PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 9.25 INCH HEIGHT CLEANING STRENGTH 32 KILOBYTE DIELECTRIC STRENGTH 58600 VOLT NET FILL 15 OUNCE APPLICABLE STANDARD NSF C1, ISO 9001
$
21.88
Qty:
Part #:CRC 18204
- METAL, CONCRETE, ASPHALT, GRAVEL, SOIL, TREES AND GRASS, UTILITY, RECREATIONAL, MUNICIPAL AND LANDSCAPING SITE, GOLF COURSE, NURSERY AND SURVEYING APPLICATION 410 DEG F (AUTO-IGNITION) TEMPERATURE RATING AEROSOL CONTAINER TYPE 17 OUNCE CONTAINER CAPACITY ALERT ORANGE COLOR/SHADE 0 TO 700 LINEAR FOOT AREA COVERAGE 1 HOUR (FULLY DRY), 30 MINUTE (TACK FREE) TOUCH DRY TIME ROHS COMPLIANT UNIT PACKAGE 20 OUNCE PROPELLANT TYPE HYDROCARBON PHYSICAL STATE LIQUID ODOR AROMATIC BOILING POINT -47.2 DEG F FLASH POINT -2.2 DEG F RELATIVE DENSITY 0.77 TO 0.85
$
15.70
CA
Qty:
Part #:INT-MAT WP5240C
- POLYCARBONATE MATERIAL CLEAR FINISH 6-3/5 INCH 6 INCH 3-5/8 INCH RECEPTACLE CONFIGURATION 2 GANG(S) BOX MOUNTING NEMA 3R ENCLOSURE VERTICAL MOUNTING POSITION CORD SIZE (2) 12 AWG OR (1) 10 AWG INCLUDES GASKET, MOUNTING SCREW, BASE, COVER ASSEMBLY, INSERT APPLICATION INDUSTRIAL, COMMERCIAL, RESIDENTIAL, AGRICULTURE, MANUFACTURING, SIGNAGE, ATHLETIC FIELD, MUNICIPALITY, WET LOCATION APPROVAL UL (CANADA AND US), CSA (CANADA AND US), NEC
$
35.74
Qty:
Part #:MULB 97072
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (2) TOGGLE SWITCH CONFIGURATION 2 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
4.22
Qty:
Part #:MULB 97073
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (3) TOGGLE SWITCH CONFIGURATION 3 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
6.33
Qty:
Part #:MULB 97091
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (1) 1.405 INCH DIA HOLE SINGLE RECEPTACLE CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
2.11
Qty:
Part #:MULB 97101
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (1) DUPLEX RECEPTACLE CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
2.11
Qty:
Part #:MULB 97102
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (2) DUPLEX RECEPTACLE CONFIGURATION 2 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
4.22
Qty:
Part #:MULB 97151
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (1) BLANK CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE BOX MOUNTING SIZE 3.281 INCH THICKNESS 0.03 INCH
$
2.11
Qty:
Part #:MULB 97401
- 430 STAINLESS STEEL MATERIAL SATIN FINISH (1) BLOCK DUPLEX/GFI RECEPTACLE CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE THICKNESS 0.03 INCH
$
2.11
Qty:
Part #:PAND PN10-14R-L
- STANDARD TYPE YELLOW COLOR 12 AWG MIN. CONDUCTOR SIZE 10 AWG MAX. CONDUCTOR SIZE UL, CSA APPROVAL 221 DEG F TEMPERATURE RATING 50 STANDARD PACKAGE 1/4 INCH STUD SIZE NYLON INSULATED INSULATION TYPE PAN-TERM[R] BRAND DIMENSION 1.26 INCH LENGTH X 0.52 INCH WIDTH X 0.04 INCH THICK MATERIAL ELECTROLYTIC TIN PLATED COPPER PN MODEL
$
1.46
Qty:
Displaying: 1 - 24 of 62 Matching Items