Power Tools - Bits, Parts, & Accessories
Power Blocks & Distribution Blocks
View:
Active Filters :
Part #:MILW 48-27-0941
- SOLID TYPE CARBON STEEL MATERIAL 6-3/16 INCH OVERALL LENGTH 15/16 INCH MAX. BORE DIAMETER HEX SHANK TYPE 1/4 INCH SHANK SIZE HEAT TREATED PROCESS CUT MATERIAL FORMICA, PLYWOOD, PLASTIC, WOOD
$
6.66
Qty:
Part #:BUSS PDBFS504
- STANDARD TYPE 2.56 INCH L X 4.665 INCH W X 3.15 INCH H SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL, CSA, CE APPROVAL 600 VAC/VDC (UL), 690 VAC/VDC (IEC) VOLTAGE RATING 760 AMPERE CURRENT RATING NO COVER TYPE 75 DEG C TEMPERATURE RATING 1 POLE(S) TIN PLATED ALUMINUM CONNECTOR MATERIAL 6 AWG TO 500 KCMIL SECONDARY OPENING WIRE SIZE 6 AWG TO 500 KCMIL PRIMARY OPENING WIRE SIZE 2 SECONDARY OPENINGS PER POLE 2 PRIMARY OPENINGS PER POLE MOUNTING TYPE DIN RAIL/PANEL MOUNT PDBFS MODEL
$
449.56
Qty:
Part #:CRC 02085
- SILICONE TYPE OPAQUE WHITE COLOR ELECTRICAL PANEL, OUTDOOR LIGHTING, SCOREBOARD, TRAFFIC LIGHT, HIGH VOLTAGE POLE, TRANSFORMER, DISCONNECT, SWITCHING MECHANISM, ELECTRICAL CONTACT, SPARK PLUG, BATTERY TERMINAL, FASTENER, O-RING, RUBBER AND PLASTIC PART APPLICATION -70 TO 400 DEG F TEMPERATURE RATING PRESSURIZED TUBE WITH SELECT-A-BEAD NOZZLE CONTAINER TYPE 3.3 OUNCE CONTAINER SIZE NLGI 2 NLGI NUMBER ROHS COMPLIANT UNIT PACKAGE 6 OUNCE BASE TYPE SILICONE ODOR MILD DIELECTRIC STRENGTH GREATER THAN 450 MILLIVOLT BOILING POINT GREATER THAN 392 DEG F MELTING/FREEZING POINT GREATER THAN 572 DEG F PROPELLANT TYPE NITROGEN SPECIFIC GRAVITY 0.97 VAPO
$
37.24
Qty:
Part #:CRC 02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3
$
19.28
Qty:
Part #:CRC 02205
- APPLICATION CONTACT, METAL SWITCH, MOTOR, RELAY, GENERATOR, EDGE CONNECTOR, BUSS BAR, CIRCUIT BREAKER, SCALE AND SENSORS COLOR CLEAR COMPOSITION HFC NT[T], CRC[R] BRAND
$
48.28
CA
Qty:
Part #:CRC 14055
- RTV SILICONE TYPE CLEAR COLOR MIL-A-46106, TT-S-00230C, TT-S-001543A, FDA 21 CFR-175.105 APPLICABLE STANDARD BONDING, PROTECTION AND WATERPROOFING IN HVAC, ELECTRICAL, CONSTRUCTION, METAL WORKING, FILLING GAPS BETWEEN MATING PART, GEARBOX, PUMP, MOTOR AND GENERAL GASKET SEALING APPLICATION -76 TO 400 DEG F TEMPERATURE RATING TUBE CONTAINER TYPE 8 OUNCE CONTAINER CAPACITY 24 HOUR (FULL CURE TIME) SETTING TIME PHYSICAL STATE PASTE ODOR ACETIC ACID BOILING POINT 680 DEG F FLASH POINT 135 DEG C SPECIFIC GRAVITY 1.007 VOC CONTENT 3 PERCENT
$
43.68
Qty:
Part #:CRC 14170
- CLEAR COLOR AIR TOOL, MECHANICAL BRAKE, CLUTCH, CHAIN, WIRE ROPE, MOTOR, DIE, MOLD, PART, BEARING, GENERATOR AND COMPRESSOR APPLICATION BOTTLE CONTAINER TYPE 20 OUNCE CONTAINER CAPACITY 14170 MSDS NUMBER 170 DEG F FLASH POINT PETROLEUM DISTILLATE, CARBON DIOXIDE PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 9.25 INCH HEIGHT CLEANING STRENGTH 32 KILOBYTE DIELECTRIC STRENGTH 58600 VOLT NET FILL 15 OUNCE APPLICABLE STANDARD NSF C1, ISO 9001
$
21.88
Qty:
Part #:CRC 18204
- METAL, CONCRETE, ASPHALT, GRAVEL, SOIL, TREES AND GRASS, UTILITY, RECREATIONAL, MUNICIPAL AND LANDSCAPING SITE, GOLF COURSE, NURSERY AND SURVEYING APPLICATION 410 DEG F (AUTO-IGNITION) TEMPERATURE RATING AEROSOL CONTAINER TYPE 17 OUNCE CONTAINER CAPACITY ALERT ORANGE COLOR/SHADE 0 TO 700 LINEAR FOOT AREA COVERAGE 1 HOUR (FULLY DRY), 30 MINUTE (TACK FREE) TOUCH DRY TIME ROHS COMPLIANT UNIT PACKAGE 20 OUNCE PROPELLANT TYPE HYDROCARBON PHYSICAL STATE LIQUID ODOR AROMATIC BOILING POINT -47.2 DEG F FLASH POINT -2.2 DEG F RELATIVE DENSITY 0.77 TO 0.85
$
15.70
CA
Qty:
Part #:LEN 145480081516
- LENOX BI-METAL SHIP AUGER BITS
EXTREME DURABILITYHigh speed steel cutting edge for superior durability in nail-embedded woodLONGER LIFEHigh speed steel screw tip increases wear resistance for extended lifeFAST, EASY DRILLINGUnique parabolic screw tip pulls the bit through material quickly and effortlesslyRESHARPENABLEResharpenable with LENOX Diamond File (product no. 25312DIAF1)
$
88.06
Qty:
Part #:BUSS PDBFS377
- STANDARD TYPE 1.86 INCH WIDTH X 4.6 INCH DEPTH X 2.94 INCH HEIGHT SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL, CSA APPROVAL 600 VOLT AC/VOLT DC (UL), 690 VOLT AC/VOLT DC (IEC) VOLTAGE RATING 570 AMP CURRENT RATING 75 DEG C TEMPERATURE RATING 1 POLE(S) TIN PLATED ALUMINUM CONNECTOR MATERIAL 14 TO 4 AWG (COPPER), 12 TO 4 AWG (ALUMINUM) SECONDARY OPENING WIRE SIZE 4 AWG TO 300 KCMIL PRIMARY OPENING WIRE SIZE 12 SECONDARY OPENINGS PER POLE 2 PRIMARY OPENINGS PER POLE MOUNTING TYPE DIN RAIL/PANEL MOUNT ENCLOSURE IP20 APPLICABLE STANDARD IEC 60529/60947-7-1 PDBFS MODEL
$
234.16
Qty:
Part #:SEL-SW SS207-7A-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.2 INCH D X 1.312 INCH H SIZE 0.688 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
17.14
Qty:
Part #:SEL-SW SS208-16-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.187 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.468 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
21.88
Qty:
Part #:SEL-SW SS206S-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.107 INCH D X 1.134 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
9.45
Qty:
Part #:SEL-SW SS206A-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.003 INCH D X 1.315 INCH H SIZE 0.64 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED OFF/MOMENTARY ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 15 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
15.32
Qty:
Part #:DOTTIE HS10
- JOBBERS LENGTH TYPE HSS MATERIAL 3-1/8 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 5/32 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 5/32 INCH DRILL DIAMETER - DECIMAL .1562 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 5/32
$
2.54
Qty:
Part #:DOTTIE HS11
- JOBBERS LENGTH TYPE HSS MATERIAL 3-1/4 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 11/64 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 11/64 INCH DRILL DIAMETER - DECIMAL .1718 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 11/64
$
2.62
Qty:
Part #:DOTTIE HS12
- JOBBERS LENGTH TYPE HSS MATERIAL 3-1/2 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 3/16 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 3/16 INCH DRILL DIAMETER - DECIMAL .1875 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 3/16
$
3.04
Qty:
Part #:DOTTIE HS13
- JOBBERS LENGTH TYPE HSS MATERIAL 3-5/8 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 13/64 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 13/64 INCH DRILL DIAMETER - DECIMAL .2031 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 13/64
$
3.34
Qty:
Part #:DOTTIE HS14
- JOBBERS LENGTH TYPE HSS MATERIAL 3-3/4 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 7/32 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 7/32 INCH DRILL DIAMETER - DECIMAL .2187 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 7/32
$
3.90
Qty:
Part #:DOTTIE HS16
- JOBBERS LENGTH TYPE HSS MATERIAL 4 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 1/4 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 1/4 INCH DRILL DIAMETER - DECIMAL .25 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 1/4
$
4.22
Qty:
Part #:DOTTIE HS24
- JOBBERS LENGTH TYPE HSS MATERIAL 5 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 3/8 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 6 DRILL DIAMETER 3/8 INCH DRILL DIAMETER - DECIMAL .375 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 3/8
$
11.44
Qty:
Displaying: 1 - 21 of 21 Matching Items