Nema Types 4, 4x, 12 & 13 Non-Metallic Enclosures, Boxes & Cabinets
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Part #:MNC 80011
- GREEN ZINC CHROMATE FINISH CLIP ON INSTALLATION GROUND NON METALLIC SHEATHED CABLE TO OUTLET BOX APPLICATION 500 STANDARD PACKAGE 14 TO 10 AWG (ALUMINUM/COPPER) CONDUCTOR SIZE
$
0.27
Qty:
Part #:DOTTIE TEKHW101
- STEEL MATERIAL ZINC PLATED FINISH 1 #10 NOMINAL DIAMETER HEX WASHER HEAD STYLE HEX DRIVE STYLE HEX SIZE 5/16 PACKAGING QUANTITY 4000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.18
Qty:
Part #:DOTTIE RMC1412
- SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC PLATED FINISH 1/2 INCH 1/4 INCH NOMINAL DIAMETER 20 TPI ROUND HEAD STYLE
$
0.14
Qty:
Part #:STAH DS141206HW
- ONE DOOR TYPE FIBERGLASS REINFORCED POLYESTER, PVC MATERIAL 13.86 INCH 13.86 WIDTH IN INCH 15.49 INCH 15.49 HEIGHT IN INCH 6.34 INCH 6.34 DEPTH IN INCH UL 50, UL 508, CUL 50, CUL 508, CSA C22.2 APPROVAL NEMA 1/3/3S/4X/12/13, IP66 ENCLOSURE HINGED, SCREW ON COVER TYPE BP-1412 NOT INCLUDED BACK PANEL DIAMONDSHIELD[T], STAHLIN[R] BRAND APPLICABLE STANDARD IEC 60529 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
335.64
Qty:
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
closeout
Part #:TB 5223
- CLOSEOUTS Only 27 Left!
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:DOTTIE FW38
- ROUND TYPE STEEL MATERIAL ZINC PLATED FINISH 7/16 INNER DIAMETER 1 OUTER DIAMETER 1/16 THICKNESS 3/8 FASTENER SIZE L H DOTTIE. BRAND PACKAGING QUANTITY 3000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.11
Qty:
Part #:DOTTIE FENW38114
- STEEL MATERIAL ZINC PLATED FINISH 3/8 INNER DIAMETER 1-1/4 OUTER DIAMETER L H DOTTIE. BRAND PACKAGING QUANTITY 3000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.20
Qty:
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:DOTTIE TMC63234
- SLOTTED/PHILLIPS (COMBO) TYPE STEEL MATERIAL ZINC PLATED FINISH 3/4 INCH #6 NOMINAL DIAMETER 32 TPI TRUSS HEAD STYLE
$
0.07
Qty:
Part #:DOTTIE TMC6321
- SLOTTED/PHILLIPS (COMBO) TYPE STEEL MATERIAL ZINC PLATED FINISH 1 INCH #6 NOMINAL DIAMETER 32 TPI TRUSS HEAD STYLE
$
0.08
Qty:
Part #:DOTTIE TMC6322
- SLOTTED/PHILLIPS (COMBO) TYPE STEEL MATERIAL ZINC PLATED FINISH 2 INCH #6 NOMINAL DIAMETER 32 TPI TRUSS HEAD STYLE
$
0.16
Qty:
Part #:DOTTIE FENW316114
- STEEL MATERIAL ZINC PLATED FINISH 3/16 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER
$
0.17
Qty:
Part #:DOTTIE FENW141
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INNER DIAMETER 1 OUTER DIAMETER L H DOTTIE. BRAND PACKAGING QUANTITY 3000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.10
Qty:
Part #:DOTTIE FENW14112
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INNER DIAMETER 1-1/2 OUTER DIAMETER L H DOTTIE. BRAND PACKAGING QUANTITY 3000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.22
Qty:
Part #:DOTTIE FENW38112
- STEEL MATERIAL ZINC PLATED FINISH 3/8 INNER DIAMETER 1-1/2 OUTER DIAMETER L H DOTTIE. BRAND PACKAGING QUANTITY 1000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.20
Qty:
Part #:DOTTIE TBC363
- COMBINATION SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC PLATED FINISH 3 10 TO 24 TPI 3/16 NOMINAL SIZE MUSHROOM HEAD HEAD STYLE 1/2 DRILL SIZE L H DOTTIE. BRAND PACKAGING QUANTITY 500 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.73
Qty:
Part #:DOTTIE TBC43
- COMBINATION SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC PLATED FINISH 3 20 TPI 1/4 NOMINAL SIZE MUSHROOM HEAD HEAD STYLE 5/8 DRILL SIZE L H DOTTIE. BRAND PACKAGING QUANTITY 500 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.85
Qty:
Part #:DOTTIE HN38
- JAM TYPE STEEL MATERIAL ZINC PLATED FINISH 3/8 NOMINAL DIAMETER 16 TPI FINISHED PROCESS L H DOTTIE. BRAND PACKAGING QUANTITY 2000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.18
Qty:
Part #:DOTTIE HN12
- JAM TYPE STEEL MATERIAL ZINC PLATED FINISH 1/2 NOMINAL DIAMETER 13 TPI FINISHED PROCESS L H DOTTIE. BRAND PACKAGING QUANTITY 1000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.33
Qty:
Part #:DOTTIE TEKHW1012
- STEEL MATERIAL ZINC PLATED FINISH 1/2 #10 NOMINAL DIAMETER HEX WASHER HEAD STYLE HEX DRIVE STYLE HEX SIZE 5/16 PACKAGING QUANTITY 4000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.16
Qty:
Part #:DOTTIE TEKHW1034
- STEEL MATERIAL ZINC PLATED FINISH 3/4 #10 NOMINAL DIAMETER HEX WASHER HEAD STYLE HEX DRIVE STYLE HEX SIZE 5/16 PACKAGING QUANTITY 4000 PER MASTER CARTON WARRANTY 90 DAYS FROM DATE OF PURCHASE
$
0.17
Qty:
Displaying: 1 - 24 of 33 Matching Items