Heavy Wall Conduit
Channel, Strut & Fittings
View:
Active Filters :
RX3I Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base
- Networks and Distributed I/O Systems The RX3i features a variety of communications options for distributed control and/or I/O. Choosefrom PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These highperformancecommunication modules are easy to install, quick to configure, and can be providedas &ldquoin rack&rdquo solutions to reduce engineering design cycles and system complexity. In addition,communication capabilities up to the SCADA level and down to the device (IED) level improveconnectivity, and time stamping capabilities deliver insight into operations to improve productivityand uptime.
PACSystems RX3i EthernetTCP/IP 10/100Mbits, two RJ-45ports with built-in switch
$
2,378.00
Qty:
Part #:EMERSON IC695PNC001
- Networks and Distributed I/O Systems The RX3i features a variety of communications options for distributed control and/or I/O. Choosefrom PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These highperformancecommunication modules are easy to install, quick to configure, and can be providedas &ldquoin rack&rdquo solutions to reduce engineering design cycles and system complexity. In addition,communication capabilities up to the SCADA level and down to the device (IED) level improveconnectivity, and time stamping capabilities deliver insight into operations to improve productivityand uptime.
PROFINET Controller (PNC)module, connects a PACSystemsRX3i controller to a high-speedPROFINET local area network.It enables the RX3i controller tocommunicate with IO-Devices onthe LAN.
$
1,897.00
Qty:
Part #:EMERSON IC695CHS007
- Baseplates RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs of yourapplication. The RX3i Universal baseplates support hot swap capability to reduce downtime.Expansion bases are available in 5 and 10 slot versions to maximize flexibility.
PACSystems RX3i7 slot high speedcontroller basesupports only5 serial bus slotssupported.Not expandable.
$
698.00
Qty:
Part #:EMERSON IC695CHS016
- Baseplates RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs of yourapplication. The RX3i Universal baseplates support hot swap capability to reduce downtime.Expansion bases are available in 5 and 10 slot versions to maximize flexibility
PACSystems RX3i16 slot high speedcontroller basesupports PCIand serial bus
$
1,075.00
Qty:
closeout
$
1.96
Qty:
$
4.46
Qty:
closeout
$
4.60
Qty:
Part #:KLEIN J206-8C
-
Strips and cuts 8-16 AWG solid and 10-18 AWG stranded wire
Long nose for extended reach, grabbing and looping wire
6-32 and 8-32 screw shearing
Induction-hardened cutting knives for hard wire
Hot-riveted joint ensures smooth action with no handle wobble
Forged steel for maximum durability
Spring-loaded for self-opening action
Dual material Journeyman&trade handles provide better grip
$
67.62
Qty:
Part #:CONDUIT 1-IN-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.315 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 161 POUND PER 100 FOOT WEIGHT 1 INCH TRADE SIZE 0.126 INCH WALL THICKNESS THREADED END STYLE
$
10.86
FT
Qty:
Part #:STL-CTY RC-1
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 1 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:S-STRUT A1200HS-10
- METAL FRAMING, SINGLE TYPE STRIP STEEL MATERIAL GOLDGALV FINISH 10 FT 1.625 INCH 1.625 INCH SLOTTED CONFIGURATION 12 GAUGE THICKNESS COLD FORMED HOT ROLLED PICKLED PROCESS 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 1-1/8 INCH W HOLE/SLOT SIZE 0.557 SQ INCH CROSS SECTION AREA
Part #:S-STRUT B1400HS-10
- METAL FRAMING, SINGLE TYPE STRIP STEEL MATERIAL GOLDGALV FINISH 10 FT 1.625 INCH 0.813 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED HOT ROLLED PICKLED PROCESS 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 1-1/8 INCH W HOLE/SLOT SIZE 0.28 SQ INCH CROSS SECTION AREA SUPERSTRUT[R] BRAND
Part #:S-STRUT A100-1/4
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 1/4 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 20 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.238 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:S-STRUT A100-3/8
- WITH SPRING TYPE MILD STEEL MATERIAL GOLD GALVANIZED FINISH 3/8 INCH NOMINAL DIAMETER 16 TPI CASE HARDENED PROCESS SUPERSTRUT. BRAND USED ON A/C SERIES CHANNEL AND INSERT 100 MODEL
Part #:S-STRUT A100-5/16
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 5/16 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 18 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.358 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:STL-CTY C105-1
- 2-PIECE TYPE GALV-KROM FINISH CSA APPLICABLE STANDARD 14 GAUGE THICKNESS 750 LB LOAD RATING CHANNEL MOUNT MOUNTING TYPE 1 INCH PIPE SIZE STEEL CLAMP MATERIAL 1 NUMBER OF SCREW/BOLTS USED ON RIGID CONDUIT AND PIPE OUTER DIAMETER 1.315 INCH C105 MODEL
Part #:STL-CTY C105-1-1/2
- 2-PIECE TYPE GALV-KROM FINISH CSA APPLICABLE STANDARD 12 GAUGE THICKNESS 800 LB LOAD RATING CHANNEL MOUNT MOUNTING TYPE 1-1/2 INCH PIPE SIZE STEEL CLAMP MATERIAL 1 NUMBER OF SCREW/BOLTS USED ON RIGID CONDUIT AND PIPE OUTER DIAMETER 1.9 INCH C105 MODEL
Part #:STL-CTY C105-1/2
- 2-PIECE TYPE GALV-KROM FINISH CSA APPLICABLE STANDARD 14 GAUGE THICKNESS 750 LB LOAD RATING CHANNEL MOUNT MOUNTING TYPE 1/2 INCH PIPE SIZE STEEL CLAMP MATERIAL 1 NUMBER OF SCREW/BOLTS USED ON RIGID CONDUIT AND PIPE OUTER DIAMETER 0.84 INCH C105 MODEL
Part #:STL-CTY C105-3/4
- 2-PIECE TYPE GALV-KROM FINISH CSA APPLICABLE STANDARD 14 GAUGE THICKNESS 750 LB LOAD RATING CHANNEL MOUNT MOUNTING TYPE 3/4 INCH PIPE SIZE STEEL CLAMP MATERIAL 1 NUMBER OF SCREW/BOLTS USED ON RIGID CONDUIT AND PIPE OUTER DIAMETER 3.5 INCH SERIES C105 MODEL
Part #:STL-CTY C106-1-1/4
- 2-PIECE TYPE GALV-KROM FINISH CSA APPLICABLE STANDARD 14 GAUGE THICKNESS 750 LB LOAD RATING CHANNEL MOUNT MOUNTING TYPE 1-1/4 INCH PIPE SIZE STEEL CLAMP MATERIAL 1 NUMBER OF SCREW/BOLTS USED ON RIGID CONDUIT AND PIPE OUTER DIAMETER 1.51 INCH C106 MODEL
Part #:CONDUIT 1-1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.9 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 263 POUND PER 100 FOOT WEIGHT 1-1/2 INCH TRADE SIZE 0.138 INCH WALL THICKNESS THREADED END STYLE
$
15.49
FT
Qty:
Part #:CONDUIT 1-1/4-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.66 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 218 POUND PER 100 FOOT WEIGHT 1-1/4 INCH TRADE SIZE 0.133 INCH WALL THICKNESS THREADED END STYLE
$
13.04
FT
Qty:
Part #:CONDUIT 1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 0.84 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 82 POUND PER 100 FOOT WEIGHT 1/2 INCH TRADE SIZE 0.104 INCH WALL THICKNESS THREADED END STYLE
$
5.57
FT
Qty:
Part #:EMERSON IC694TBB132
- High Density 32 Point Terminal Block Box Style with Extended Shroud for Large Wiring Bundles
$
91.00
Qty:
Displaying: 1 - 24 of 84 Matching Items