General Duty
Elbows-Cplgs-Npls-Run Thrd
View:
Active Filters :
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:GE TGN3321
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
108.00
Qty:
Part #:GE CR123C196A
- CR124C SERIES OVERLOAD RELAY, CR1062R/CR1062S SERIES MANUAL STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, M-0, M-1 NEMA SIZE 1.72 TO 1.91 AMPERE (1-PHASE 2 HEATER UNIT), 1.56 TO 1.73 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE
$
9.00
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:GE TG3221
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 1 HP AT 240 VAC 1-PHASE, 3 HP AT 240 VAC 3-PHASE (NEC STANDARD), 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (TIME DELAY), 5 HP AT 250/600 VDC POWER RATING 2 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
84.00
Qty:
Part #:GE TG4322R
- GENERAL DUTY TYPE 8.38 INCH W X 3.88 INCH D X 13.68 INCH H SIZE 4 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 60 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 10 HP AT 240 VAC 1-PHASE, 15 HP AT 240 VAC 3-PHASE (TIME DELAY), 10 HP AT 250/600 VDC POWER RATING 3 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
305.00
Qty:
Part #:GE TGN3321R
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 9.78 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
203.00
Qty:
Part #:GE CR123C250B
- CR124C/CR124D SERIES OVERLOAD RELAY, CR1062R/CR1062S/CR1062T SERIES STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, 2, M-0, M-1, M-1P NEMA SIZE 24 TO 27.8 AMPERE (1-PHASE 2 HEATER UNIT), 21.6 TO 24.7 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE CR123C MODEL
$
9.00
Qty:
Part #:GE CR123C326A
- CR124C SERIES OVERLOAD RELAY, CR1062R/CR1062S SERIES MANUAL STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, M-0, M-1 NEMA SIZE 2.77 TO 3.19 AMPERE (1-PHASE 2 HEATER UNIT), 2.48 TO 387 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE
$
9.00
Qty:
Part #:GE CR123C366B
- CR124D/CR324D SERIES OVERLOAD RELAY, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 2, M-1P NEMA SIZE 35.4 TO 40.9 AMP (1-PHASE 2-HEATER UNIT), 32.6 TO 36.7 AMP (3-PHASE 3-HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE SPECTRA SERIES[TM] BRAND CR123C MODEL
$
9.00
Qty:
Part #:GE CR305X100A
- BASIC AUXILIARY CONTACT TYPE 300 LINE MAGNETIC STARTER/CONTACTOR USED ON 1NO CONTACT CONFIGURATION 120 VAC/30 VDC 0.15 AMPERE CONTACT RATING 0, 1 NEMA SIZE LEFT/RIGHT MOUNTING LOCATION APPLICATION LOW VOLTAGE CONTROL CIRCUIT (24 V AND BELOW)
$
36.00
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Part #:CONDUIT 1-1/2-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 15 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
32.82
Qty:
Displaying: 1 - 24 of 51 Matching Items