General Duty
Elbows-Cplgs-Npls-Run Thrd
View:
Active Filters :
Part #:CARLON E98TSCN-CAR
- POLYCARBONATE MATERIAL PAINTED FINISH GRAY COLOR 1 GANG(S) UL, CSA APPROVAL BOX/DEVICE MOUNTING LEVER OPERATOR TYPE (1) TOGGLE SWITCH DEVICE TYPE VERTICAL MOUNTING POSITION APPLICATION WET/DAMP LOCATION
Part #:CARLON E9G2DDN-CAR
- POLYCARBONATE MATERIAL 4-27/34 INCH W X 4-27/34 INCH H SIZE TEXTURED FINISH GRAY COLOR 2 GANG(S) UL, CSA APPROVAL BOX/DEVICE MOUNT MOUNTING HORIZONTAL MOUNTING POSITION DOUBLE LID LID TYPE (2) DUPLEX RECEPTACLE DEVICE OPENING APPLICATION OUTDOOR, WET/DAMP LOCATION
Part #:CARLON E9G2SSN
- GRAY COLOR 2 GANG(S) UL, CSA APPROVAL LEVER OPERATOR TYPE (2) TOGGLE SWITCH DEVICE TYPE CARLON. BRAND
Part #:LEV 101AN-W
- ANGLED, NON POLARIZED TYPE WHITE COLOR 1-15P CONFIGURATION 2 WIRE(S) RESIDENTIAL GRADE UL, CSA APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING NON GROUNDING 2 POLE(S) 0.25 INCH CORD SIZE LEVITON[R] BRAND
$
4.60
Qty:
Part #:MULB 40580
- SPRAYED BRASS COLOR 3 WIRE(S) UL APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING WITH 6 INCH LEAD
$
8.19
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:GE TGN3321
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
108.00
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:GE TG3221
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 1 HP AT 240 VAC 1-PHASE, 3 HP AT 240 VAC 3-PHASE (NEC STANDARD), 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (TIME DELAY), 5 HP AT 250/600 VDC POWER RATING 2 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
84.00
Qty:
Part #:GE TG4322R
- GENERAL DUTY TYPE 8.38 INCH W X 3.88 INCH D X 13.68 INCH H SIZE 4 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 60 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 10 HP AT 240 VAC 1-PHASE, 15 HP AT 240 VAC 3-PHASE (TIME DELAY), 10 HP AT 250/600 VDC POWER RATING 3 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
305.00
Qty:
Part #:GE TGN3321R
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 9.78 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
203.00
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Part #:CONDUIT 1-1/2-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 15 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
32.82
Qty:
Displaying: 1 - 24 of 52 Matching Items