Electrical Insulating, No Adhesive
Channel, Strut & Fittings
View:
Active Filters :
Part #:3M 2510-3/4X60FT
-
Straight-cut, woven, cotton-cloth backing is oil-primed and coated with yellow, electrical, insulating varnish
Excellent dielectric strength
Suitable for insulating bus bars, motor leads and service drop connections
Wide and narrow width electrical tape available (0.75 in &ndash 2 in.)
Temperature stable with an operating range of 32°F (0°C) to 220°F (105°C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
ASTM Approved and RoHS 2011/65/EU Compliant
Yellow, varnish coated cotton cloth, no adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
Scotch® Tape 2510 has a straight-cut, woven cotton, cambric fabric backing that provides high tensile strength and ruggedness. This fabric is coated and oil-primed with yellow electrical insulating varnish. This moisture-resistant tape offers excellent dielectric strength with cut-through and puncture resistance. ASTM Approved and RoHS 2011/65/EU Compliant.
$
59.78
Qty:
Part #:3M 130C-3/4X30FT
- LINERLESS, HIGH VOLTAGE INSULATING TYPE ETHYLENE PROPYLENE RUBBER MATERIAL BLACK FINISH 30 FOOT 0.75 INCH 194 DEG F MAX. CONTINUOUS TEMPERATURE 266 DEG F MAX. SHORT TERM TEMPERATURE 69 KILOVOLT VOLTAGE RATING 30 MIL THICKNESS 750 VOLT PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND ROHS COMPLIANT BREAKING STRENGTH 7.5 INCH-POUND APPLICATION PREMIUM GRADE APPLICABLE STANDARD ASTM D-4388 130C MODEL
$
33.03
Qty:
Part #:3M 130C-2X30FT
- HIGH VOLTAGE INSULATING TYPE LINERLESS, EPR MATERIAL 30 FT 2 INCH 194 DEG F MAX. CONTINUOUS TEMPERATURE 266 DEG F MAX. SHORT TERM TEMPERATURE 30 MIL THICKNESS 30 THICKNESS IN MIL 750 V PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND APPLICABLE STANDARD ASTM D-4388, HH-I-553C PACKAGING QUANTITY 12 ROLL PER CASE 130C MODEL
$
88.03
Qty:
$
1.96
Qty:
$
4.10
Qty:
$
4.60
Qty:
Part #:STL-CTY RC-1
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 1 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:STL-CTY RC-3/4
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 50 PER CARTON STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:S-STRUT AP-232SQ-EG
- Connector, Square Post Base, Post Height 3-1/2 Inches, Post Length 1-11/16 Inch, Width 1- 11/16 Inch, 4 Holes, Hole Diameter 3/4 Inch, Base Size 6 Inches x 6 Inches, Electro Galvanized Steel &bull Excellent corrosion reisistance
Part #:S-STRUT A804
- END CAP TYPE STEEL MATERIAL GOLDGALV FINISH A-1200 AND A-1400 SERIES CHANNEL USED ON 25 STANDARD PACKAGE 800 MODEL
Part #:S-STRUT B804
- END CAP TYPE STEEL MATERIAL GOLDGALV FINISH B-1400 CHANNEL USED ON BLANK, KNOCKOUT CONFIGURATION COLD FORMED HOT ROLLED PROCESS APPLICATION SURFACE RACEWAY AND LIGHTING SYSTEM 800 MODEL
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:S-STRUT A208
- U SUPPORT TYPE CARBON STEEL MATERIAL 7-1/4 INCH L SIZE GOLD GALVANIZED FINISH A SERIES CHANNEL USED ON 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 4 HOLE(S) 9/16 INCH DIA HOLE SIZE HOLE SPACING ON CENTER 1-7/8 INCH HOLE SPACING FROM END 13/16 INCH 200 MODEL
Part #:S-STRUT AB227
- ANGLE TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 1-5/8 INCH OVERALL WIDTH CHANNEL APPLICATION 1/4 INCH THICKNESS 9/16 INCH HOLE HOLE/SLOT SIZE 2-HOLE NUMBER OF HOLES/SLOTS HOLE SPACING ON CENTER 1-7/8 INCH HOLE SPACING FROM END 13/16 INCH 200 MODEL
Part #:S-STRUT H104-3/8X6
- STRAIGHT TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 6 FT OVERALL LENGTH 3/8 INCH NOMINAL DIAMETER 16 TPI CSA APPLICABLE STANDARD LOAD RATING 610 LB H104 MODEL
Part #:STL-CTY EC-1
- EDGE TYPE MALLEABLE IRON MATERIAL 1.315 INCH MAX. JAW CAPACITY MOUNTING PIPE CONDUIT APPLICATION HEX HEAD SCREW TYPE YES SUPPLIED WITH SCREW PIPE SIZE 1 INCH EC MODEL
Part #:STL-CTY PC-1/2
- PARALLEL TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 50 PER CARTON STANDARD PACKAGE 1/2 INCH TRADE SIZE 1/2 INCH CONDUIT SIZE IBERVILLE[R] BRAND PC MODEL
Part #:STL-CTY PC-1
- PARALLEL TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 1 INCH CONDUIT SIZE IBERVILLE[R] BRAND OVERALL DIMENSION 2-1/2 INCH LENGTH X 1-3/16 INCH WIDTH PC MODEL
Part #:STL-CTY RC-1/2
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 50 PER CARTON STANDARD PACKAGE 1/2 INCH TRADE SIZE 1/2 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:STL-CTY RC-1-1/4
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 1-1/4 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:STL-CTY RC-1-1/2
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 1-1/2 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:STL-CTY RC-2SC
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE 2 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:STL-CTY RC-4SC
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH 4.5 INCH MAX. JAW CAPACITY MOUNTING PIPE CONDUIT APPLICATION YES SUPPLIED WITH SCREW PIPE SIZE 4 INCH RC MODEL
Part #:STL-CTY B937
- TEE TYPE STEEL MATERIAL GALVANIZED KROM FINISH 4-1/2 INCH 4 INCH 1-1/2 INCH CHANNEL WIDTH 3/16 INCH THICKNESS 5 HOLE(S) 9/16 INCH DIA HOLE/SLOT SIZE APPLICATION KINDORF CHANNELS
Displaying: 1 - 24 of 55 Matching Items