Emt Fittings
Emt Conduit
View:
Active Filters :
Part #:VICTOR 10747-S
- STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 125 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.12
Qty:
Part #:ARL EMT50
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 0.84 INCH DIAMETER 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.15
Qty:
Part #:ARL EMT75
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.056 INCH DIAMETER 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.22
Qty:
Part #:ARL EMT100
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.28 INCH DIAMETER 100 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.66
Qty:
Part #:ARL EMT125
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.66 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
1.15
Qty:
Part #:ARL EMT250
- 1.225 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 3.062 INCH DIAMETER 25 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
4.77
Qty:
Part #:ARL EMT400
- 1.233 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 4.815 INCH DIAMETER 25 STANDARD PACKAGE 4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
8.61
Qty:
Part #:CRC 02085
- SILICONE TYPE OPAQUE WHITE COLOR ELECTRICAL PANEL, OUTDOOR LIGHTING, SCOREBOARD, TRAFFIC LIGHT, HIGH VOLTAGE POLE, TRANSFORMER, DISCONNECT, SWITCHING MECHANISM, ELECTRICAL CONTACT, SPARK PLUG, BATTERY TERMINAL, FASTENER, O-RING, RUBBER AND PLASTIC PART APPLICATION -70 TO 400 DEG F TEMPERATURE RATING PRESSURIZED TUBE WITH SELECT-A-BEAD NOZZLE CONTAINER TYPE 3.3 OUNCE CONTAINER SIZE NLGI 2 NLGI NUMBER ROHS COMPLIANT UNIT PACKAGE 6 OUNCE BASE TYPE SILICONE ODOR MILD DIELECTRIC STRENGTH GREATER THAN 450 MILLIVOLT BOILING POINT GREATER THAN 392 DEG F MELTING/FREEZING POINT GREATER THAN 572 DEG F PROPELLANT TYPE NITROGEN SPECIFIC GRAVITY 0.97 VAPO
$
37.24
CA
Qty:
Part #:CRC 02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3
$
19.28
CA
Qty:
Part #:KLEIN 56028
-
Bright, focused flashlight and broadcasting work light in one tool
Strong magnet for secure, hands-free illumination
Glow ring tip charges while the light is on and allows for easy retrieval in the dark and in your tool bag
Waterproof (IP67) and dustproof
Aluminum body with cushion-grip handle
Pocket clip for easy, convenient access
$
42.06
Qty:
Part #:TB 5223
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:MADISON LG-141-2
- DIE-CAST ZINC, ALUMINUM COVER, NEOPRENE GASKET MATERIAL RIGID CONDUIT USED ON THREADED FEMALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
4.88
Qty:
Part #:STL-CTY TL202SC
- DIE-CAST ZINC MATERIAL 1.24 INCH DIA SIZE EMT CONDUIT USED ON SET SCREW INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEG BEND ANGLE TL MODEL
Part #:STL-CTY TC211SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-1/4 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1 INCH DIAMETER 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC212SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-11/32 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-5/32 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC213SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-29/64 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-15/32 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC223SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-9/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-27/64 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
Part #:STL-CTY TC224SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-15/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-13/16 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
4.18
Qty:
Part #:STL-CTY TC225SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-9/32 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-3/64 INCH DIAMETER 40 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
5.57
Qty:
Part #:STL-CTY TC226SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-33/64 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-17/32 INCH DIAMETER 20 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
6.97
Qty:
Part #:CONDUIT 3/4-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 0.922 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 46 POUND PER 100 FOOT WEIGHT 3/4 INCH TRADE SIZE 0.049 INCH WALL THICKNESS PLAIN END STYLE
$
2.10
FT
Qty:
Part #:CONDUIT 1-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 1.163 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 67 POUND PER 100 FOOT WEIGHT 1 INCH TRADE SIZE 0.057 INCH WALL THICKNESS PLAIN END STYLE
$
2.95
FT
Qty:
Part #:CONDUIT 1-1/2-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 111 LB PER 100 FT WEIGHT 1 1/2 INCH TRADE SIZE 1 1/2 TRADE SIZE IN INCH 1 1/2 TRADE SIZE - FRACTIONAL
$
6.13
FT
Qty:
Part #:CONDUIT 2-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 2.197 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 148 POUND PER 100 FOOT WEIGHT 2 INCH TRADE SIZE 0.065 INCH WALL THICKNESS PLAIN END STYLE
$
7.18
FT
Qty:
Displaying: 1 - 24 of 29 Matching Items