Elbows-Cplgs-Npls-Run Thrd
Class Rk1
View:
Active Filters :
Part #:BUSS LPS-RK-50SP
- CLASS RK1 TYPE 5.5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VOLT AC, 300 VOLT DC VOLTAGE RATING 1.06 INCH DIAMETER 300 KILOAMP SYMMETRICAL, 100 KILOAMP (DC) INTERRUPTING RATING 50 AMP CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 10 SECOND TIME DELAY AT 500 PERCENT RATED LOAD, DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND CONTACT MATERIAL SILVER PLATED APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH LPS-RK MODEL
$
106.36
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:GE CR123C196A
- CR124C SERIES OVERLOAD RELAY, CR1062R/CR1062S SERIES MANUAL STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, M-0, M-1 NEMA SIZE 1.72 TO 1.91 AMPERE (1-PHASE 2 HEATER UNIT), 1.56 TO 1.73 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE
$
9.00
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:GE CR123C250B
- CR124C/CR124D SERIES OVERLOAD RELAY, CR1062R/CR1062S/CR1062T SERIES STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, 2, M-0, M-1, M-1P NEMA SIZE 24 TO 27.8 AMPERE (1-PHASE 2 HEATER UNIT), 21.6 TO 24.7 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE CR123C MODEL
$
9.00
Qty:
Part #:GE CR123C326A
- CR124C SERIES OVERLOAD RELAY, CR1062R/CR1062S SERIES MANUAL STARTER, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 0, 1, M-0, M-1 NEMA SIZE 2.77 TO 3.19 AMPERE (1-PHASE 2 HEATER UNIT), 2.48 TO 387 AMPERE (3-PHASE 3 HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE
$
9.00
Qty:
Part #:GE CR123C366B
- CR124D/CR324D SERIES OVERLOAD RELAY, CR340/CR341 SERIES PUMPING PANEL USED ON PANEL MOUNTING 3 STANDARD PACKAGE 2, M-1P NEMA SIZE 35.4 TO 40.9 AMP (1-PHASE 2-HEATER UNIT), 32.6 TO 36.7 AMP (3-PHASE 3-HEATER UNIT) MOTOR FLA CLASS 20, STANDARD TRIP TYPE SPECTRA SERIES[TM] BRAND CR123C MODEL
$
9.00
Qty:
Part #:GE CR305X100A
- BASIC AUXILIARY CONTACT TYPE 300 LINE MAGNETIC STARTER/CONTACTOR USED ON 1NO CONTACT CONFIGURATION 120 VAC/30 VDC 0.15 AMPERE CONTACT RATING 0, 1 NEMA SIZE LEFT/RIGHT MOUNTING LOCATION APPLICATION LOW VOLTAGE CONTROL CIRCUIT (24 V AND BELOW)
$
36.00
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Part #:CONDUIT 1-1/2-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 15 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
32.82
Qty:
Part #:CONDUIT 2-IN-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
49.18
Qty:
Part #:CONDUIT 1/2XCLOSE-X1-1/8-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:CONDUIT 1/2X2-1/2-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 2-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
3.04
Qty:
Displaying: 1 - 24 of 51 Matching Items