General Duty
Elbows-Cplgs-Npls-Run Thrd
View:
Active Filters :
Part #:BUSS GMA-3.15-R
- MINIATURE GLASS TUBE TYPE 20 MM UL/CSA 248-14, CE APPROVAL 125 VAC/32 VDC VOLTAGE RATING 5 MM DIAMETER 10000 AMPERE AT 125 VAC INTERRUPTING RATING 3.15 AMPERE CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING CHARACTERISTICS ROHS COMPLIANT MATERIAL NICKEL-PLATED BRASS (ENDCAP) APPLICATION ELECTRONIC CIRCUITS GMA MODEL
$
2.21
Qty:
Part #:BUSS MDL-2-R
- GLASS TUBE TYPE 1 1/4 INCH UL, CSA C22.2, CE APPROVAL 250 VAC VOLTAGE RATING 1/4 INCH DIAMETER 100 AMPERE AT 250 VAC, 10000 AMPERE AT 125 VAC INTERRUPTING RATING 2 AMPERE CURRENT RATING FERRULE TERMINAL TYPE TIME DELAY CHARACTERISTICS BUSSMANN[R] BRAND MDL MODEL
$
3.32
Qty:
Part #:BUSS AGC-1/2
- MINIATURE GLASS TUBE TYPE 1-1/4 INCH UL 248-14, CSA, CE APPROVAL 250 VOLT AC VOLTAGE RATING 1/4 INCH DIAMETER 35 AMP AT 250 VOLT AC, 10 KA AT 125 VOLT AC INTERRUPTING RATING 1/2 AMP CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING CHARACTERISTICS MATERIAL NICKEL PLATED BRASS (ENDCAP) APPLICATION ELECTRONIC CIRCUIT AGC MODEL
$
2.46
Qty:
Part #:BUSS AGC-3/4
- MINIATURE GLASS TUBE TYPE 1-1/4 INCH UL 248-14, CSA, CE APPROVAL 250 VAC/32 VDC VOLTAGE RATING 1/4 INCH DIAMETER 35 AMPERE AT 250 VAC, 10000 AMPERE AT 125 VAC INTERRUPTING RATING 3/4 AMPERE CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING CHARACTERISTICS MATERIAL NICKEL-PLATED BRASS (ENDCAP) APPLICATION ELECTRONIC CIRCUIT AGC MODEL
$
2.46
Qty:
Part #:BUSS AGC-6
- MINIATURE GLASS TUBE TYPE 1-1/4 INCH UL 248-14, CSA, CE APPROVAL 250 VOLT AC VOLTAGE RATING 1/4 INCH DIAMETER 200 AMP AT 250 VOLT AC, 10000 AMP AT 125 VOLT AC INTERRUPTING RATING 6 AMP CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING CHARACTERISTICS MATERIAL NICKEL PLATED BRASS (ENDCAP) APPLICATION ELECTRONIC CIRCUIT AGC MODEL
$
2.38
Qty:
Part #:BUSS GMA-5A
- MINIATURE GLASS TUBE TYPE 20 MILLIMETER UL 248-14, CSA, CE, PSE APPROVAL 125 VOLT AC VOLTAGE RATING 5 MILLIMETER DIAMETER 10000 AMP INTERRUPTING RATING 5 AMP CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING, LOW BREAKING CHARACTERISTICS MATERIAL NICKEL PLATED BRASS (ENDCAP) APPLICATION ELECTRONIC CIRCUIT GMA MODEL
$
1.96
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:GE TGN3321
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
108.00
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:GE TG3221
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 10.28 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 1 ENCLOSURE 30 AMPERE CURRENT RATING 1 HP AT 240 VAC 1-PHASE, 3 HP AT 240 VAC 3-PHASE (NEC STANDARD), 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (TIME DELAY), 5 HP AT 250/600 VDC POWER RATING 2 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
84.00
Qty:
Part #:GE TG4322R
- GENERAL DUTY TYPE 8.38 INCH W X 3.88 INCH D X 13.68 INCH H SIZE 4 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 60 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 10 HP AT 240 VAC 1-PHASE, 15 HP AT 240 VAC 3-PHASE (TIME DELAY), 10 HP AT 250/600 VDC POWER RATING 3 POLE(S) CARTRIDGE, CLASS H/K/R FUSE TYPE NO NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TG MODEL
$
305.00
Qty:
Part #:GE TGN3321R
- GENERAL DUTY TYPE 6.38 INCH W X 3.31 INCH D X 9.78 INCH H SIZE 3 WIRE(S) UL 98, CSA APPROVAL NEMA 3R ENCLOSURE 30 AMPERE CURRENT RATING 3 HP AT 240 VAC 1-PHASE, 7 HP AT 240 VAC 3-PHASE (NEC STANDARD), 5 HP AT 250/600 VDC POWER RATING 3 POLE(S) SWITCHING NEUTRAL TYPE 240 V AC VOLTAGE RATING 250/600 V DC VOLTAGE RATING NON-FUSIBLE FUSE PROVISION SPEC-SETTER[TM] BRAND SERIES TGN MODEL
$
203.00
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Displaying: 1 - 24 of 51 Matching Items