Elbows-Couplings-Nipples - Steel
Distribution Devices - Ducts, Raceways, Runways, Trays
View:
Active Filters :
Part #:PAND F2X2LG6
- SLOTTED, NARROW FINGER TYPE PVC MATERIAL LIGHT GRAY FINISH 6 FT 72 LENGTH IN INCH 2 INCH 2 WIDTH IN INCH 2 INCH 2 HEIGHT IN INCH 6 LENGTH IN FT CSA APPROVAL 0.195 INCH X 0.5 INCH SLOT MOUNTING 120 FT STANDARD PACKAGE NO COVER INCLUDED PANDUCT[R] BRAND TEMPERATURE RATING 50 DEG C HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN F MODEL
$
8.66
Qty:
Part #:PAND F4X4WH6
- SLOTTED, NARROW FINGER TYPE PVC MATERIAL WHITE FINISH 6 FT 72 LENGTH IN INCH 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 6 LENGTH IN FT CSA APPROVAL 0.195 INCH X 0.5 INCH SLOT MOUNTING 60 FT STANDARD PACKAGE COVER INCLUDED PANDUCT[R] BRAND TEMPERATURE RATING 50 DEG C HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN F MODEL
$
17.54
Qty:
Part #:PAND G1.5X3LG6
- SLOTTED, WIDE FINGER TYPE PVC MATERIAL LIGHT GRAY FINISH 6 FT 72 LENGTH IN INCH 1.5 INCH 1.5 WIDTH IN INCH 3 INCH 3 HEIGHT IN INCH 6 LENGTH IN FT CSA APPROVAL 0.195 INCH X 0.5 INCH SLOT MOUNTING 120 FT STANDARD PACKAGE COVER INCLUDED PANDUCT[R] BRAND TEMPERATURE RATING 50 DEG C HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN G MODEL
$
11.00
Qty:
Part #:PAND G2X3LG6
- SLOTTED, WIDE FINGER TYPE PVC MATERIAL LIGHT GRAY FINISH 6 FT 72 LENGTH IN INCH 2 INCH 2 WIDTH IN INCH 3 INCH 3 HEIGHT IN INCH 6 LENGTH IN FT CSA APPROVAL 0.195 INCH X 0.5 INCH SLOT MOUNTING 60 FT STANDARD PACKAGE NO COVER INCLUDED PANDUCT[R] BRAND TEMPERATURE RATING 50 DEG C HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN G MODEL
$
11.32
Qty:
Part #:PAND G1X1.5WH6
- SLOTTED, WIDE FINGER TYPE PVC MATERIAL WHITE FINISH 6 FT 72 LENGTH IN INCH 1 INCH 1 WIDTH IN INCH 1.5 INCH 1.5 HEIGHT IN INCH 6 LENGTH IN FT CSA APPROVAL 0.195 INCH X 0.5 INCH SLOT MOUNTING 120 FT STANDARD PACKAGE NO COVER INCLUDED PANDUCT[R] BRAND TEMPERATURE RATING 50 DEG C HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN G MODEL
$
8.14
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:HUBW HBL430C7W
- POLARIZED TYPE ZYTEL ST801 NYLON MATERIAL 0.375 INCH MIN. CABLE OUTER DIAMETER 1.22 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 498/1682/1686C2, CSA C22.2 APPROVAL 480 VOLT AC 3-PHASE VOLTAGE RATING 30 AMP CURRENT RATING 3 POLE(S) IMPACT RESISTANT, WATER TIGHT WIRING DEVICE-KELLEMS BRAND COLOR RED ENCLOSURE RATING IP67 TEMPERATURE RATING -40 TO 75 DEG C APPLICABLE STANDARD IEC 60309-1/60309-2
$
522.76
Qty:
Part #:HUBW HBL430P7W
- FAN, HEATER, POLARIZED, PUMP, WITH LOCKING RING TYPE ZYTEL ST801 NYLON MATERIAL 0.375 INCH MIN. CABLE OUTER DIAMETER 1.25 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 62, UL 94, UL 1682, UL 1686C2, CSA C22.2 APPROVAL 480 VAC 3 PHASE VOLTAGE RATING 30 AMPERE CURRENT RATING 3 POLE(S) IMPACT RESISTANT, MOISTURE RESISTANT, WATER TIGHT HUBBELL[R] BRAND APPLICABLE STANDARD IEC 309-1, 309-2 AREA OF APPLICATION AGRICULTURE, CHEMICAL PROCESSING, CONSTRUCTION, ENTERTAINMENT, FOOD PROCESSING, FOOD SERVICE, MANUFACTURING, MILITARY ENCLOSURE IP67 PIN MATERIAL BRASS OPERATING TEMPERATURE -40 TO 75 DEG C HBL MODEL
$
494.06
Qty:
Part #:HUBW HBL460P7W
- FAN, HEATER, POLARIZED, PUMP, WITH LOCKING RING TYPE ZYTEL ST801 NYLON MATERIAL 0.7 INCH MIN. CABLE OUTER DIAMETER 1.45 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 62, UL 94, UL 1682, UL 1686C2, CSA C22.2 APPROVAL 480 VAC 3 PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) IMPACT RESISTANT, MOISTURE RESISTANT, WATER TIGHT HUBBELL[R] BRAND APPLICABLE STANDARD IEC 309-1, 309-2 AREA OF APPLICATION AGRICULTURE, CHEMICAL PROCESSING, CONSTRUCTION, ENTERTAINMENT, FOOD PROCESSING, FOOD SERVICE, MANUFACTURING, MILITARY ENCLOSURE IP67 PIN MATERIAL BRASS OPERATING TEMPERATURE -40 TO 75 DEG C HBL MODEL
$
733.90
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Part #:CONDUIT 1-1/2-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 15 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
32.82
Qty:
Part #:CONDUIT 2-IN-45DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
49.18
Qty:
Displaying: 1 - 24 of 51 Matching Items