Hammond Mfg
Egs Electrical Group
View:
Active Filters :
- Manufacturer: Egs Electrical Group Hammond Mfg Kidde Home Protection Stahlin Enclosures
- Main Menu: Electrical Supplies
Part #:EGS HUBG200DN
- THREADED TYPE DIE-CAST ZINC (BODY/NUT), BUNA-N (O-RING), MILD STEEL (GROUND SCREW) MATERIAL 3.25 INCH DIAMETER X 2.12 INCH LENGTH SIZE RIGID/IMC CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL GROUNDING SCREW 2 INCH TRADE SIZE NEMA 2/3/3R/4/4X/5/12/13, WATER TIGHT, CORROSION RESISTANT POLYCARBONATE INSULATED THROAT TYPE ENCLOSURE TYPE CLASS I DIV 2, CLASS II DIV 1 AND 2, CLASS III APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC, NEMA FB-1 HUBG MODEL
$
48.86
Qty:
Part #:HMND HPB
- OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #8-32 TPI X 3/4 INCH L THREADED STUD, WINGNUT MOUNTING HARDWARE 1.75 INCH HOLE SIZE PUSHBUTTON HOLE
$
7.80
Qty:
Part #:HMND HP100
- OIL TIGHT, OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #10-24 TPI X 0.55 INCH THREADED STUD, PLATED WINGNUT MOUNTING HARDWARE 1.38 INCH HOLE SIZE 1 INCH HOLE CONDUIT SIZE ROHS COMPLIANT PLUG DIAMETER 1.88 INCH HP MODEL
$
0.24
Qty:
Part #:HMND HP200
- OIL TIGHT, OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #10-24 TPI X 0.55 INCH THREADED STUD, PLATED WINGNUT MOUNTING HARDWARE 2.5 INCH HOLE SIZE 2 INCH HOLE CONDUIT SIZE ROHS COMPLIANT PLUG DIAMETER 3 INCH HP MODEL
$
0.24
Qty:
Part #:KID 21006376
- WIRE-IN SMOKE ALARM TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE RED LED (4 MODES OF OPERATION), GREEN LED (RECEIVING AC POWER) LED/STROBE TYPE 24 INTERCONNECTION(S) TOTALINE[R], FIREX[R] BRAND SIZE 5 INCH DIA X 1.75 INCH D TEMPERATURE RATING 40 TO 100 DEG F I12060 MODEL
$
16.94
Qty:
Part #:STAH DSMGFTKIT
- (4) MOUNTING SCREWS MOUNTING HARDWARE STAHLIN[R] BRAND
$
33.42
Qty:
Part #:HAM PH500MQMJ
- 4.75 INCH WIDTH X 5.94 INCH DEPTH X 4.31 INCH HEIGHT SIZE 50/60 HERTZ FREQUENCY RATING UL 506, UL (CANADA AND US), CE APPROVAL ANSI 506, IEC 61558, NEMA ST-1 APPLICABLE STANDARD 0.94 INCH LENGTH X 0.31 INCH WIDTH SLOT MOUNTING 500 VOLT AMP POWER RATING SCREW TERMINAL TYPE 240 X 480 VOLT AC, 230 X 460 VOLT AC, 220 X 440 VOLT AC PRIMARY VOLTAGE 120 X 240 VOLT AC, 115 X 230 VOLT AC, 110 X 220 VOLT AC SECONDARY VOLTAGE 130 INSULATION CLASS 80 DEG C TEMPERATURE RISE HAMMOND BRAND ROHS COMPLIANT OUTPUT CURRENT 4.17/2.08 AMP MOUNTING FEET MATERIAL HEAVY STEEL APPLICATION PROCESS CONTROL, PANEL SHOP, MACHINE AUTOMOTIVE, CONTROL BOARD, HVAC PANEL, POWER TIMER, SOLENOID, CONTROLLER, PAPER MILL AND PRINTING INCLUDES FUSE CLIP PH MODEL
$
270.16
Qty:
Part #:EGS 4CSE1/2
- STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-7/8 INCH 1.875 DEPTH IN INCH 1 GANG(S) UL APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY 1/2 INCH KNOCKOUT SIZE 8 KNOCKOUT(S) (6) SIDE, (2) END KNOCKOUT LOCATION DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
19.92
Qty:
Part #:HMND HP150
- OIL TIGHT, OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #10-24 TPI X 0.55 INCH THREADED STUD, PLATED WINGNUT MOUNTING HARDWARE 2 INCH HOLE SIZE 1-1/2 INCH HOLE CONDUIT SIZE ROHS COMPLIANT PLUG DIAMETER 2.5 INCH HP MODEL
$
2.32
Qty:
Part #:HMND HP50
- OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #8-32 TPI X 3/4 INCH L THREADED STUD, WINGNUT MOUNTING HARDWARE 1.38 INCH HOLE SIZE 0.5 INCH HOLE CONDUIT SIZE CONDUIT HOLE
$
0.44
Qty:
Part #:STAH DS141206HW
- ONE DOOR TYPE FIBERGLASS REINFORCED POLYESTER, PVC MATERIAL 13.86 INCH 13.86 WIDTH IN INCH 15.49 INCH 15.49 HEIGHT IN INCH 6.34 INCH 6.34 DEPTH IN INCH UL 50, UL 508, CUL 50, CUL 508, CSA C22.2 APPROVAL NEMA 1/3/3S/4X/12/13, IP66 ENCLOSURE HINGED, SCREW ON COVER TYPE BP-1412 NOT INCLUDED BACK PANEL DIAMONDSHIELD[T], STAHLIN[R] BRAND APPLICABLE STANDARD IEC 60529 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
335.64
Qty:
Part #:EGS 561LXE
- G60 HOT DIP ZINC GALVANIZED AISI/SAE 1008 0.0625 INCH STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A, 514B APPROVAL 4 INCH DIAMETER PLASTER EAR MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (2) 1/2 INCH SIDES, (4) 21/32 INCH ENDS KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDES, (4) ENDS KNOCKOUT LOCATION TYPE CL-26 NON-METALLIC SHEATHED CABLE CLAMP TYPE ETP[R] BRAND APPLICABLE STANDARD NEMA OS1/FB1
$
32.50
Qty:
Displaying: 1 - 12 of 12 Matching Items