Control Station Enclosures
Cable & Cord Grips
View:
Active Filters :
Part #:GE P9EPEG1
- PLASTIC MATERIAL GRAY COLOR 2.83 INCH 2.83 WIDTH IN INCH 2.83 INCH 2.83 HEIGHT IN INCH 2.1 INCH 2.1 DEPTH IN INCH UL 508, CSA C22.2, CE APPROVAL BASE MOUNTING NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE 1-ROW VERTICAL DEVICE HOLE LOCATION 22.5 MM DIA DEVICE HOLE SIZE 1 DEVICE HOLE(S) C-2000[T] BRAND CONTACT RATING 600 VAC 10 AMPERE, 300 VDC 2.5 AMPERE OPERATING TEMPERATURE -13 TO 158 DEG F WITH YELLOW COVER
$
15.00
Qty:
closeout
Part #:CARLON CP300N
- CLOSEOUTS Only 2 Left!
- MOLDED THERMOPLASTIC MATERIAL GRAY COLOR 3.5 INCH 9.38 INCH 3.38 INCH UL, CSA APPROVAL INTEGRAL FLANGE, WALL MOUNTING 1-ROW VERTICAL DEVICE HOLE LOCATION 1-7/32 INCH DIA DEVICE HOLE SIZE 3 DEVICE HOLE(S) CIRCUIT SAFE[R] BRAND APPLICATION INDUSTRIAL CONTROL, JUNCTION BOX, PILOT LIGHT, SWITCH COVER TYPE SCREW-ON EXTERNAL DEPTH WITH COVER 3.38 INCH INCLUDES BRASS SCREW INSERT TEMPERATURE RATING -40 TO 185 DEG F
$
243.14
Qty:
Part #:PAND JN218-216-MN
- INSULATED TYPE (2) #22 MIN. WIRE COMBINATION SIZE (2) #16 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.29
Qty:
Part #:PAND JN418-212-C
- INSULATED TYPE (4) #18 MIN. WIRE COMBINATION SIZE (2) #12 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 100 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.89
Qty:
Part #:INT-MAT T104
- 24 HR TYPE DRAWN STEEL MATERIAL 5 INCH W X 3 INCH D X 7 3/4 INCH H SIZE GRAY FINISH 1 HR MIN. OFF TIME 1 HR MIN. ON TIME CSA (CANADA AND US), CSA C22.2 APPROVAL INDOOR/OUTDOOR LIGHTING, POST LANTERN, SIGN, POOL HEATER, FILTER, HYDROCHLORINATOR, AIR CONDITIONING, BLOWER, ELECTRIC FENCE, PUMP, HEATING/VENTILATING SYSTEM, MUSIC AND SIGNAL SYSTEM, FAN, POULTRY FOGGER, CONVEYER APPLICATION 208 TO 277 VAC AT 60 HZ VOLTAGE RATING NEMA 1 ENCLOSURE 40 AMPERE (RESISTIVE/TUNGSTEN) CURRENT RATING 5 HP AT 240 VAC SINGLE PHASE (28 FLA), 1000 VA (PILOT DUTY) POWER RATING -40 TO 130 DEG F OPERATING TEMPERATURE DPST SWITCH TYPE NO RESERVE POWER INTERMATIC[R] BRAND WITH ON/OFF TRIPPER T100 MODEL
$
138.84
Qty:
closeout
Part #:TB 2251
- CLOSEOUTS Only 15 Left!
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2521
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2921NM
- STRAIGHT TYPE NYLON BODY, RUBBER BUSHING MATERIAL 1-7/32 INCH DIA SIZE UL, CSA APPROVAL DRY/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.31 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURES CORROSION RESISTANT, LIQUIDTIGHT, STRAIN RELIEF OPERATING TEMPERATURE -34 TO 105 DEG C
Part #:INT-MAT T101
- 24 HR TYPE DRAWN STEEL MATERIAL 5 INCH W X 3 INCH D X 7 3/4 INCH H SIZE GRAY FINISH 1 HR MIN. OFF TIME 1 HR MIN. ON TIME CSA (CANADA AND US), CSA C22.2 APPROVAL INDOOR/OUTDOOR LIGHTING, POST LANTERN, SIGN, POOL HEATER, FILTER, HYDROCHLORINATOR, AIR CONDITIONING, BLOWER, ELECTRIC FENCE, PUMP, HEATING/VENTILATING SYSTEM, MUSIC AND SIGNAL SYSTEM, FAN, POULTRY FOGGER, CONVEYER APPLICATION 125 VAC AT 60 HZ VOLTAGE RATING NEMA 1 ENCLOSURE 40 AMPERE (RESISTIVE/TUNGSTEN) CURRENT RATING 2 HP AT 120 VAC (24 FLA), 1000 VA (PILOT DUTY) POWER RATING -40 TO 130 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE NO RESERVE POWER INTERMATIC[R] BRAND WITH ON/OFF TRIPPER T100 MODEL
$
120.00
Qty:
Part #:PAND PN10-14R-L
- STANDARD TYPE YELLOW COLOR 12 AWG MIN. CONDUCTOR SIZE 10 AWG MAX. CONDUCTOR SIZE UL, CSA APPROVAL 221 DEG F TEMPERATURE RATING 50 STANDARD PACKAGE 1/4 INCH STUD SIZE NYLON INSULATED INSULATION TYPE PAN-TERM[R] BRAND DIMENSION 1.26 INCH LENGTH X 0.52 INCH WIDTH X 0.04 INCH THICK MATERIAL ELECTROLYTIC TIN PLATED COPPER PN MODEL
$
1.46
Qty:
Part #:CARLON CP200NB
- NARROW TYPE MOLDED THERMOPLASTIC MATERIAL GRAY COLOR 3.5 INCH 7.13 INCH 3.38 INCH UL, CSA APPROVAL INTEGRAL FLANGE, WALL MOUNTING NEMA 1/3/3S/4/4X/12/13 ENCLOSURE CIRCUIT SAFE[R] BRAND APPLICATION CONTROL, INSTRUMENTATION, JUNCTION BOX COVER TYPE SCREW-ON EXTERNAL DEPTH WITH COVER 3.38 INCH INCLUDES BRASS SCREW INSERT TEMPERATURE RATING -40 TO 185 DEG F
$
205.04
Qty:
Part #:TB 2522
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2534
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2922
- STRAIGHT TYPE STEEL BODY/GLAND NUT/GRIP, RUBBER BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF THROAT SIZE 47/64 INCH DIA
Part #:BUR CCD
- COMPRESSION TAP CONNECTOR TYPE HIGH DENSITY POLYETHYLENE MATERIAL D DIE USED ON SNAP-ON INSTALLATION 2-3/4 INCH L CONNECTOR SIZE CRIMPIT[TM] BRAND ROHS COMPATIBLE COLOR BLACK CC MODEL
$
4.44
Qty:
Part #:TB 2209
- 45 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-13/32 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2269
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2270
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2535
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2524
- STRAIGHT TYPE DIE CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL LIQUIDTIGHT, STRAIN RELIEF, DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE OPERATING TEMPERATURE 105 DEG C SERIES 2520 MODEL
Part #:TB 2525
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
closeout
Part #:TB 2530
- CLOSEOUTS Only 180 Left!
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.125 TO 0.25 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2531
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2536
- STRAIGHT TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-15/16 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.75 TO 0.88 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Displaying: 1 - 24 of 28 Matching Items