Hot-Riveted, Spring Loaded
Class Rk1
View:
Active Filters :
RX3I Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base
- Networks and Distributed I/O Systems The RX3i features a variety of communications options for distributed control and/or I/O. Choosefrom PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These highperformancecommunication modules are easy to install, quick to configure, and can be providedas &ldquoin rack&rdquo solutions to reduce engineering design cycles and system complexity. In addition,communication capabilities up to the SCADA level and down to the device (IED) level improveconnectivity, and time stamping capabilities deliver insight into operations to improve productivityand uptime.
PACSystems RX3i EthernetTCP/IP 10/100Mbits, two RJ-45ports with built-in switch
$
2,378.00
Qty:
Part #:EMERSON IC695PNC001
- Networks and Distributed I/O Systems The RX3i features a variety of communications options for distributed control and/or I/O. Choosefrom PROFINET Controller, Ethernet EGD, PROFIBUS-DP, Genius and DeviceNet. These highperformancecommunication modules are easy to install, quick to configure, and can be providedas &ldquoin rack&rdquo solutions to reduce engineering design cycles and system complexity. In addition,communication capabilities up to the SCADA level and down to the device (IED) level improveconnectivity, and time stamping capabilities deliver insight into operations to improve productivityand uptime.
PROFINET Controller (PNC)module, connects a PACSystemsRX3i controller to a high-speedPROFINET local area network.It enables the RX3i controller tocommunicate with IO-Devices onthe LAN.
$
1,897.00
Qty:
Part #:EMERSON IC695CHS007
- Baseplates RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs of yourapplication. The RX3i Universal baseplates support hot swap capability to reduce downtime.Expansion bases are available in 5 and 10 slot versions to maximize flexibility.
PACSystems RX3i7 slot high speedcontroller basesupports only5 serial bus slotssupported.Not expandable.
$
698.00
Qty:
Part #:EMERSON IC695CHS016
- Baseplates RX3i baseplates are available in 7, 12 and 16 slot configurations to the meet the needs of yourapplication. The RX3i Universal baseplates support hot swap capability to reduce downtime.Expansion bases are available in 5 and 10 slot versions to maximize flexibility
PACSystems RX3i16 slot high speedcontroller basesupports PCIand serial bus
$
1,075.00
Qty:
Part #:ARL 610
- PORCELAIN WIRE HOLDER, STEEL CLAMP MATERIAL CLAMP ON INSTALLATION 1-1/4 TO 3 INCH PIPE SIZE STANDARD PACKAGE 5
$
16.37
Qty:
Part #:ARL 617
- PORCELAIN MATERIAL 3.775 INCH X 1.75 INCH SIZE ITEM CABLE SUPPORT
$
19.52
Qty:
Part #:ARL 660
- DIE CAST ZINC MATERIAL 2.26 INCH L X 2.06 INCH W X 2.97 INCH H SIZE SERVICE CABLE USED ON 3/8 TO 3/1 AWG WIRE SIZE UL, CSA APPROVAL 2 HOLE(S) 0.58 INCH HOLE SIZE PACKAGING QUANTITY 50 66 MODEL
$
8.62
Qty:
Part #:ARL 844
- DIE CAST ZINC MATERIAL 1.312 INCH NON METALLIC CABLE, SERVICE ENTRANCE UTILITY CABLE USED ON 0.71 INCH THREAD LENGTH 0.9 INCH MAX. OPENING UL 514B, UL 388D, UL 282F, CSA APPROVAL 2.03 INCH DIAMETER 1-1/4 INCH TRADE SIZE 84 MODEL
$
4.55
Qty:
Part #:ARL 849
- DIE CAST ZINC MATERIAL 1.59 INCH NON METALLIC CABLE, SERVICE ENTRANCE UTILITY CABLE USED ON 0.823 INCH THREAD LENGTH 0.96 INCH MAX. OPENING UL 514B, UL 388D, UL 282F, CSA APPROVAL 2.9 INCH DIAMETER 2 INCH TRADE SIZE 84 MODEL
$
8.81
Qty:
Part #:ARL WTC210
- LETTER CODED GLAND TYPE DIE CAST ZINC MATERIAL 2.15 INCH SERVICE ENTRANCE CABLE USED ON 0.64 INCH THREAD LENGTH 3/0 AWG (GLAND A), 4/0 AWG (GLAND B) CABLE SIZE UL (CANADA AND US) APPROVAL 2.917 INCH DIAMETER 2 INCH TRADE SIZE WTC MODEL
$
30.95
Qty:
Part #:ARL CS20
- 2.65 INCH X 2.53 INCH X 0.5 INCH SIZE UL, CSA APPROVAL NUMBER OF CONDUCTORS 6 ITEM CABLE SUPPORT
$
0.62
Qty:
Part #:ARL K-STRAP
- PLATED STEEL MATERIAL 3.5 INCH L X 0.755 INCH W X 0.89 INCH H SIZE 2 HOLE INSTALLATION 3/0 AWG, 4/0 AWG CABLE SIZE
$
0.88
Qty:
Part #:ARL 849S
- 2-SCREW TYPE DIE-CAST ZINC MATERIAL 1.59 INCH NON-METALLIC CABLE, SERVICE ENTRANCE CABLE USED ON 1.75 INCH MAX. OPENING UL, CSA APPROVAL 2.9 INCH DIAMETER 2 INCH TRADE SIZE KNOCKOUT SIZE 2 INCH
$
8.81
Qty:
Part #:CARLON LT20H
- 90 DEGREE TYPE NON-METALLIC (BODY), PLASTIC (LOCKNUT) MATERIAL LIQUIDTIGHT FLEXIBLE NON-METALLIC CONDUIT USED ON UL 514B, UL (CANADA AND US) APPROVAL 5 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CARFLEX BRAND
Part #:CARLON LT43G
- STRAIGHT TYPE NON-METALLIC MATERIAL LIQUIDTIGHT FLEXIBLE NON-METALLIC CONDUIT USED ON UL 514B, UL (CANADA AND US) APPROVAL 5 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CARFLEX[R] BRAND
Part #:CARLON LT43H
- STRAIGHT TYPE NON-METALLIC MATERIAL LIQUIDTIGHT FLEXIBLE NON-METALLIC CONDUIT USED ON UL 514B, UL (CANADA AND US) APPROVAL 5 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CARFLEX[R] BRAND
Part #:CARLON LT43E-NEW
- STRAIGHT TYPE GRAY PVC (BODY), NITRILE RUBBER (O-RING) MATERIAL CARFLEX CONDUIT USED ON UL 514B, UL (CANADA AND US) APPROVAL 50 PER OUTER PACK STANDARD PACKAGE 3/4 INCH TRADE SIZE CARFLEX[R] BRAND CONSTRUCTIONAL FEATURE LIQUID TIGHT, OIL RESISTANT, ACID RESISTANT, OZONE AND ALKALINE RESISTANT TEMPERATURE RATING 107 DEG C APPLICATION INDOOR, OUTDOOR, WET LOCATION
Part #:CARLON LT43F-NEW
- STRAIGHT TYPE NON-METALLIC MATERIAL LIQUIDTIGHT FLEXIBLE NON-METALLIC CONDUIT USED ON UL 514B, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CARFLEX[R] BRAND
Part #:BUSS LPS-RK-50SP
- CLASS RK1 TYPE 5.5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VOLT AC, 300 VOLT DC VOLTAGE RATING 1.06 INCH DIAMETER 300 KILOAMP SYMMETRICAL, 100 KILOAMP (DC) INTERRUPTING RATING 50 AMP CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 10 SECOND TIME DELAY AT 500 PERCENT RATED LOAD, DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND CONTACT MATERIAL SILVER PLATED APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH LPS-RK MODEL
$
120.60
Qty:
Part #:KLEIN J206-8C
-
Strips and cuts 8-16 AWG solid and 10-18 AWG stranded wire
Long nose for extended reach, grabbing and looping wire
6-32 and 8-32 screw shearing
Induction-hardened cutting knives for hard wire
Hot-riveted joint ensures smooth action with no handle wobble
Forged steel for maximum durability
Spring-loaded for self-opening action
Dual material Journeyman&trade handles provide better grip
$
67.62
Qty:
Part #:MADISON 31-1
- 2-NAIL, FLAT INDENTED HEAD TYPE STEEL MATERIAL 1.125 INCH 0.563 INCH (3) 14 TO 12 AWG, (3) 10 AWG (BX/NON-METALLIC SHEATHED CABLE) OR 3/8 INCH (FLEX) CABLE SIZE 5000 STANDARD PACKAGE 9/16 INCH X 1-1/4 INCH TRADE SIZE
$
10.88
Qty:
closeout
Part #:TB 2251
- CLOSEOUTS Only 15 Left!
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2521
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2921NM
- STRAIGHT TYPE NYLON BODY, RUBBER BUSHING MATERIAL 1-7/32 INCH DIA SIZE UL, CSA APPROVAL DRY/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.31 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURES CORROSION RESISTANT, LIQUIDTIGHT, STRAIN RELIEF OPERATING TEMPERATURE -34 TO 105 DEG C
Displaying: 1 - 24 of 129 Matching Items