Elbows-Couplings-Nipples - Steel
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Active Filters :
Part #:3M UF1-SPLICE-KIT-6-KITS
- UNDERGROUND FEEDER CABLE TYPE 1.8 INCH CONNECTOR, 8 INCH HEAT SHRINK TUBE CONTENTS UL APPROVAL CYLINDRICAL SET SCREW CONNECTOR TYPE 600 V VOLTAGE RATING 3 CONDUCTOR(S) 10 TO 14 AWG CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE 1 SPLICE(S) 3M[T] BRAND OPERATING TEMPERATURE -67 TO 230 DEG F PACKAGING QUANTITY 6 KIT PER CASE UF MODEL
$
73.37
Qty:
Part #:3M UF2-SPLICE-KIT-6-KITS
- UNDERGROUND FEEDER CABLE TYPE 11.7 INCH CONNECTOR, 20 INCH HEAT SHRINK TUBE CONTENTS UL APPROVAL CYLINDRICAL SET SCREW CONNECTOR TYPE 600 V VOLTAGE RATING 3 CONDUCTOR(S) 10 TO 14 AWG CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE 1 SPLICE(S) 3M[T] BRAND OPERATING TEMPERATURE -67 TO 230 DEG F PACKAGING QUANTITY 6 KIT PER CASE UF MODEL
$
81.73
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:CONDUIT 1-1/2-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/16 INCH RIGID CONDUIT USED ON 2.16 INCH DIAMETER 1-1/2 INCH TRADE SIZE
$
3.86
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 3/4XCLOSEX1-3/8-GALV-NIP
- THREADED MALE, CLOSE TYPE GALVANIZED STEEL MATERIAL 1-3/8 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 3/4 INCH TRADE SIZE
$
1.85
Qty:
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:CONDUIT 3/4-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-41/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
3.40
Qty:
Part #:CONDUIT 3/4-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 4-1/2 INCH BEND RADIUS
$
7.42
Qty:
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Part #:CONDUIT 4-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 1 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
2.16
Qty:
Displaying: 1 - 24 of 43 Matching Items