Flexible Conduit Ftgs, Etc. - Cable & Cord Grips
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Part #:GE P9CPNNG
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE BLACK COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
closeout
Part #:GE P9CPNVG
- CLOSEOUTS Only 1 Left!
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CPNRS
- STANDARD, ROUND EXTENDED TYPE 22.5 MM SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CER4RN
- MUSHROOM 40 MILLIMETER DIAMETER TYPE 22.5 MILLIMETER SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL CONTACT RATING 600 VOLT AC 10 AMP, 300 VOLT DC 2.5 AMP P9 MODEL
$
38.50
Qty:
closeout
Part #:GE P9CPLVGD
- CLOSEOUTS Only 1 Left!
- ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
Part #:GE P9CPLGGD
- ROUND FLUSH TYPE 22.5 MM SIZE YELLOW COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
Part #:ARL 610
- PORCELAIN WIRE HOLDER, STEEL CLAMP MATERIAL CLAMP ON INSTALLATION 1-1/4 TO 3 INCH PIPE SIZE STANDARD PACKAGE 5
$
16.37
Qty:
Part #:ARL 617
- PORCELAIN MATERIAL 3.775 INCH X 1.75 INCH SIZE ITEM CABLE SUPPORT
$
19.52
Qty:
Part #:PAND JN218-216-MN
- INSULATED TYPE (2) #22 MIN. WIRE COMBINATION SIZE (2) #16 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.32
Qty:
Part #:PAND JN418-212-C
- INSULATED TYPE (4) #18 MIN. WIRE COMBINATION SIZE (2) #12 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 100 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.89
Qty:
Part #:PAND PN10-14R-L
- STANDARD TYPE YELLOW COLOR 12 AWG MIN. CONDUCTOR SIZE 10 AWG MAX. CONDUCTOR SIZE UL, CSA APPROVAL 221 DEG F TEMPERATURE RATING 50 STANDARD PACKAGE 1/4 INCH STUD SIZE NYLON INSULATED INSULATION TYPE PAN-TERM[R] BRAND DIMENSION 1.26 INCH LENGTH X 0.52 INCH WIDTH X 0.04 INCH THICK MATERIAL ELECTROLYTIC TIN PLATED COPPER PN MODEL
$
1.46
Qty:
Part #:APP CG-75100
- STRAIGHT TYPE ALUMINUM BODY, COPPER FREE ALUMINUM CAP, NEOPRENE GROMMET, STEEL/NON-ST. WASHER MATERIAL 1-3/4 INCH DIA SIZE UL APPROVAL DRY/WET LOCATION, LIQUID TIGHT, STRAIN RELIEF APPLICATION 1 INCH THREAD SIZE 0.75 TO 0.875 INCH CORD SIZE APPLETON. BRAND CG MODEL
$
18.72
Qty:
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:BUR CCD
- COMPRESSION TAP CONNECTOR TYPE HIGH DENSITY POLYETHYLENE MATERIAL D DIE USED ON SNAP-ON INSTALLATION 2-3/4 INCH L CONNECTOR SIZE CRIMPIT[TM] BRAND ROHS COMPATIBLE COLOR BLACK CC MODEL
$
4.44
Qty:
Part #:HUBW 07401018
- UL, CSA APPROVAL CRANE, HAND TOOL, HAZARDOUS LOCATION, HOIST PENDANT DROP STATION, LIQUIDTIGHT, PROCESSING EQUIPMENT, PUMP APPLICATION STRAIGHT MALE CONNECTOR TYPE 3/4 INCH NPT THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE STAINLESS STEEL MESH MATERIAL DOUBLE TO SINGLE WEAVE MESH TYPE ALUMINUM CONNECTOR MATERIAL KELLEMS[R] BRAND FOR INSULATED CABLE 07401 MODEL
$
120.14
Qty:
Part #:TB 2920NM
- STRAIGHT TYPE BLACK NYLON MATERIAL 1-7/32 INCH DIA SIZE UL, CSA APPROVAL HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.125 TO 0.375 INCH CORD SIZE RANGER[R] BRAND CONSTRUCTIONAL FEATURE CORROSION RESISTANT, LIQUIDTIGHT, STRAIN RELIEF OPERATING TEMPERATURE RATING -34 TO 105 DEG C
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
$
21.88
Qty:
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:HUBW 073041277
- 4 INCH EYE LENGTH 4 INCH MESH LENGTH 4 MESH LENGTH IN INCH 0.32 TO 0.43 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 450 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
30.24
Qty:
Part #:HUBW 073041278
- 6 INCH EYE LENGTH 4-3/4 INCH MESH LENGTH 4.75 MESH LENGTH IN INCH 0.43 TO 0.56 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 550 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
34.86
Qty:
Part #:HUBW 073041282
- 9 INCH EYE LENGTH 9-1/2 INCH MESH LENGTH 9.5 MESH LENGTH IN INCH 1 TO 1.25 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 1500 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
50.54
Qty:
Displaying: 1 - 23 of 23 Matching Items