Flexible Conduit Ftgs, Etc. - Cable & Cord Grips
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Active Filters :
Part #:ARL 610
- PORCELAIN WIRE HOLDER, STEEL CLAMP MATERIAL CLAMP ON INSTALLATION 1-1/4 TO 3 INCH PIPE SIZE STANDARD PACKAGE 5
$
16.37
Qty:
Part #:ARL 617
- PORCELAIN MATERIAL 3.775 INCH X 1.75 INCH SIZE ITEM CABLE SUPPORT
$
19.52
Qty:
Part #:BUSS PDBFS504
- STANDARD TYPE 2.56 INCH L X 4.665 INCH W X 3.15 INCH H SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL, CSA, CE APPROVAL 600 VAC/VDC (UL), 690 VAC/VDC (IEC) VOLTAGE RATING 760 AMPERE CURRENT RATING NO COVER TYPE 75 DEG C TEMPERATURE RATING 1 POLE(S) TIN PLATED ALUMINUM CONNECTOR MATERIAL 6 AWG TO 500 KCMIL SECONDARY OPENING WIRE SIZE 6 AWG TO 500 KCMIL PRIMARY OPENING WIRE SIZE 2 SECONDARY OPENINGS PER POLE 2 PRIMARY OPENINGS PER POLE MOUNTING TYPE DIN RAIL/PANEL MOUNT PDBFS MODEL
$
449.56
Qty:
Part #:APP CG-75100
- STRAIGHT TYPE ALUMINUM BODY, COPPER FREE ALUMINUM CAP, NEOPRENE GROMMET, STEEL/NON-ST. WASHER MATERIAL 1-3/4 INCH DIA SIZE UL APPROVAL DRY/WET LOCATION, LIQUID TIGHT, STRAIN RELIEF APPLICATION 1 INCH THREAD SIZE 0.75 TO 0.875 INCH CORD SIZE APPLETON. BRAND CG MODEL
$
18.72
Qty:
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
Part #:HUBW 07401018
- UL, CSA APPROVAL CRANE, HAND TOOL, HAZARDOUS LOCATION, HOIST PENDANT DROP STATION, LIQUIDTIGHT, PROCESSING EQUIPMENT, PUMP APPLICATION STRAIGHT MALE CONNECTOR TYPE 3/4 INCH NPT THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE STAINLESS STEEL MESH MATERIAL DOUBLE TO SINGLE WEAVE MESH TYPE ALUMINUM CONNECTOR MATERIAL KELLEMS[R] BRAND FOR INSULATED CABLE 07401 MODEL
$
123.82
Qty:
Part #:TB 2920NM
- STRAIGHT TYPE BLACK NYLON MATERIAL 1-7/32 INCH DIA SIZE UL, CSA APPROVAL HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.125 TO 0.375 INCH CORD SIZE RANGER[R] BRAND CONSTRUCTIONAL FEATURE CORROSION RESISTANT, LIQUIDTIGHT, STRAIN RELIEF OPERATING TEMPERATURE RATING -34 TO 105 DEG C
Part #:BUSS PDBFS377
- STANDARD TYPE 1.86 INCH WIDTH X 4.6 INCH DEPTH X 2.94 INCH HEIGHT SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL, CSA APPROVAL 600 VOLT AC/VOLT DC (UL), 690 VOLT AC/VOLT DC (IEC) VOLTAGE RATING 570 AMP CURRENT RATING 75 DEG C TEMPERATURE RATING 1 POLE(S) TIN PLATED ALUMINUM CONNECTOR MATERIAL 14 TO 4 AWG (COPPER), 12 TO 4 AWG (ALUMINUM) SECONDARY OPENING WIRE SIZE 4 AWG TO 300 KCMIL PRIMARY OPENING WIRE SIZE 12 SECONDARY OPENINGS PER POLE 2 PRIMARY OPENINGS PER POLE MOUNTING TYPE DIN RAIL/PANEL MOUNT ENCLOSURE IP20 APPLICABLE STANDARD IEC 60529/60947-7-1 PDBFS MODEL
$
234.16
Qty:
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
$
21.88
Qty:
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:HUBW 073041277
- 4 INCH EYE LENGTH 4 INCH MESH LENGTH 4 MESH LENGTH IN INCH 0.32 TO 0.43 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 450 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
31.16
Qty:
Part #:HUBW 073041278
- 6 INCH EYE LENGTH 4-3/4 INCH MESH LENGTH 4.75 MESH LENGTH IN INCH 0.43 TO 0.56 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 550 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
35.98
Qty:
Part #:HUBW 073041282
- 9 INCH EYE LENGTH 9-1/2 INCH MESH LENGTH 9.5 MESH LENGTH IN INCH 1 TO 1.25 INCH CABLE SIZE UL, CSA APPROVAL GALVANIZED STEEL MESH MATERIAL 1500 LB BREAKING STRENGTH SINGLE EYE TYPE KELLEMS[R] BRAND MESH LENGTH IN INCH - UOM IN
$
52.08
Qty:
Displaying: 1 - 15 of 15 Matching Items