Nema Types 4, 4x, 12 & 13 Non-Metallic Enclosures, Boxes & Cabinets
Channel, Strut & Fittings - Channel & Strut Fittings
View:
Part #:CARLON E989RRR-UPC
- MOLDED PPO THERMOPLASTIC MATERIAL 6 INCH 6 INCH 6 INCH DIRECT BURIAL INSTALLATION UL, CSA APPROVAL NEMA 4/4X/6P ENCLOSURE SCREW COVER TYPE 8 STANDARD PACKAGE
Part #:CARLON E381D-CAR
- T TYPE NON-METALLIC MATERIAL GRAY COLOR 1/2 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL APPROVAL SURFACE MOUNTING FEET MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION ENVIRONMENTAL CONDITIONS CORROSION RESISTANT
Part #:ARL FS8141
- PLASTIC MATERIAL TEXTURED FINISH 3.312 INCH 3.312 WIDTH IN INCH 5.093 INCH 5.093 HEIGHT IN INCH 2.056 INCH 2.056 DEPTH IN INCH 1 GANG(S) UL APPROVAL 18.6 CU INCH CAPACITY 1/2 INCH LAP STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN FS MODEL
$
7.05
Qty:
Part #:ARL MB8
- CEILING FAN/FIXTURE TYPE 0.74 INCH .74 DEPTH IN INCH 8 DIAMETER IN INCH ROUND SHAPE 10 APPROVAL 8 INCH DIAMETER (2) #10 X 3 INCH WOOD SCREW, (1) #8 X 1 1/2 INCH WOOD SCREW MOUNTING UL, CSA STANDARD PACKAGE 6.1 CU INCH CAPACITY DEPTH IN INCH - UOM IN DIAMETER IN INCH - UOM IN
$
22.56
Qty:
Part #:STAH DS141206HW
- ONE DOOR TYPE FIBERGLASS REINFORCED POLYESTER, PVC MATERIAL 13.86 INCH 13.86 WIDTH IN INCH 15.49 INCH 15.49 HEIGHT IN INCH 6.34 INCH 6.34 DEPTH IN INCH UL 50, UL 508, CUL 50, CUL 508, CSA C22.2 APPROVAL NEMA 1/3/3S/4X/12/13, IP66 ENCLOSURE HINGED, SCREW ON COVER TYPE BP-1412 NOT INCLUDED BACK PANEL DIAMONDSHIELD[T], STAHLIN[R] BRAND APPLICABLE STANDARD IEC 60529 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
335.64
Qty:
Part #:S-STRUT AB205
- CORNER TYPE CARBON STEEL MATERIAL 3-1/2 INCH LENGTH X 1-5/8 INCH WIDTH X 4-1/8 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 74.5 POUND PER 100 WEIGHT 4 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
closeout
Part #:TB 5223
- CLOSEOUTS Only 27 Left!
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:S-STRUT AB201
- CORNER TYPE CARBON STEEL MATERIAL 1-5/8 INCH LENGTH X 1-5/8 INCH WIDTH X 2-1/4 INCH HEIGHT SIZE GOLDGALV FINISH 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 35.5 POUND PER 100 WEIGHT 2 HOLE(S) 9/16 INCH DIAMETER HOLE/SLOT SIZE 2 SIDE(S) END TO HOLE CENTER SIZE 13/16 INCH HOLE SPACING ON CENTER SIZE 1-7/8 INCH 200 MODEL
closeout
Part #:S-STRUT 701-3/4
- CLOSEOUTS Only 58 Left!
- TUBING TO STRUT TYPE 14 GAUGE STEEL MATERIAL GOLDGALV[R] FINISH 3/4 INCH OUTER DIAMETER TWO PIECE CONSTRUCTION 750 LB LOAD RATING SUPERSTRUT[R] BRAND APPROVAL CSA 701 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Displaying: 1 - 10 of 10 Matching Items