Centre Wire Stop
Aerosol
View:
Active Filters :
Part #:CRC 02018
- CLEAR COLOR ENERGIZED ELECTRICAL CLEANER APPLICATION BOTTLE CONTAINER TYPE 20 OUNCE CONTAINER CAPACITY 2018 MSDS NUMBER CHLORINATED, CARBON DIOXIDE PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE LECTRA CLEAN[R] BRAND ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 9.25 INCH HEIGHT CLEANING STRENGTH 95 KILOBYTE DIELECTRIC STRENGTH 50500 VOLT NET FILL 19 OUNCE APPLICABLE STANDARD NSF K2, ISO 9001
$
27.40
CA
Qty:
Part #:CRC 02125
- APPLICATION PLASTIC CONTAINER SIZE 16 OZ CONTAINER SIZE IN GAL .125 CONTAINER SIZE IN GAL - UOM GAL CONTAINER SIZE IN OZ 16 CONTAINER SIZE IN OZ - UOM OZ MSDS NUMBER 2125 TYPE AEROSOL HF[T] BRAND 021 MODEL DIELECTRIC STRENGTH 43600 V CONTAINS NO CLASS I/CLASS II OZONE DEPLETING CHEMICAL FLASH POINT GREATER THAN 142 DEG F
$
27.82
CA
Qty:
Part #:CRC 02130
- CLEAR COLOR TELEPHONE, PC, RELAY, EDGE CONNECTOR, TAPE HEAD, BUSS BAR, CIRCUIT, CONTACT, PRINTED CIRCUIT BOARD, SWITCH AND BREAKER APPLICATION BOTTLE CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 2130 MSDS NUMBER 0 DEG F FLASH POINT PETROLEUM DISTILLATE, HFC-152A PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE QD[R] BRAND ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT CLEANING STRENGTH 27 KILOBYTE DIELECTRIC STRENGTH 36700 VOLT NET FILL 11 OUNCE APPLICABLE STANDARD NSF K2, ISO 9001
$
30.38
CA
Qty:
Part #:CRC 03190
- APPLICATION PLASTIC CONTAINER SIZE 16 OZ CONTAINER SIZE IN GAL .125 CONTAINER SIZE IN GAL - UOM GAL CONTAINER SIZE IN OZ 16 CONTAINER SIZE IN OZ - UOM OZ MSDS NUMBER 3190 TYPE AEROSOL PF[T] BRAND 031 MODEL DIELECTRIC STRENGTH 29000 V VOC EXEMPT
$
87.96
CA
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:HUBW CR5252IG
- DUPLEX TYPE REINFORCED THERMOPLASTIC POLYESTER BASE, NYLON FACE MATERIAL ORANGE COLOR 5-15R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498, UL FS, CSA C22.2 APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING ISOLATED GROUND 2 POLE(S) HEAT RESISTANT, IMPACT RESISTANT BACK, SIDE WIRING HUBBELL[R] BRAND CONTACT MATERIAL 0.031 INCH BRONZE OPERATING TEMPERATURE -40 TO 75 DEG C
$
21.32
Qty:
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:BUR YS2C
- BUTT WITH CENTER WIRE STOP TYPE 2.82 INCH 0.42 INCH OUTER DIAMETER COPPER CONDUCTOR MATERIAL UL, CSA APPROVAL 35 KILOVOLT VOLTAGE RATING ELECTRO TIN PLATED COPPER BODY MATERIAL 2 AWG STRANDED CONDUCTOR SIZE BROWN COLOR CODE LONG WITH BEVELLED ENTRY, CHAMFERED BARREL TYPE HYLINK[TM] BRAND ROHS COMPLIANT WIRE STRIP LENGTH 1-5/16 INCH DIE INDEX 10 TEMPERATURE RATING 90 DEG C YS MODEL
$
23.42
Qty:
Part #:BUR YS4C
- BUTT WITH CENTER WIRE STOP TYPE 2.55 INCH 0.34 INCH OUTER DIAMETER COPPER CONDUCTOR MATERIAL UL, CSA APPROVAL 35 KILOVOLT VOLTAGE RATING ELECTRO TIN PLATED COPPER BODY MATERIAL 4 AWG STRANDED CONDUCTOR SIZE GRAY COLOR CODE LONG WITH BEVELLED ENTRY, CHAMFERED BARREL TYPE HYLINK[TM] BRAND ROHS COMPLIANT WIRE STRIP LENGTH 1-3/16 INCH DIE INDEX 8/346 TEMPERATURE RATING 90 DEG C YS MODEL
$
19.32
Qty:
Part #:HUBW DR20I
- DUPLEX TYPE NYLON MATERIAL IVORY COLOR 5-20R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498, CSA C22.2 APPROVAL 125 V VOLTAGE RATING 20 AMPERE CURRENT RATING GROUNDING 2 POLE(S) BACK, SIDE WIRING HUBBELL[R] BRAND
$
10.66
Qty:
Part #:HUBW AFR15TRI
- DUPLEX TYPE IVORY COLOR 5-15R CONFIGURATION 3 WIRE(S) COMMERCIAL, RESIDENTIAL GRADE 120 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING 2 POLE(S) BACK, SIDE WIRING APPLICABLE STANDARD NEC APPROVAL UL 498, CSA C22.2, FED SPEC W-C-596 SERIES AFR MODEL
$
94.10
Qty:
Part #:HUBW HBL5262
- DUPLEX TYPE REINFORCED THERMOPLASTIC POLYESTER BASE, NYLON FACE MATERIAL BROWN COLOR 5-15R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498, CSA C22.2, UL FS WC596 APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) HEAT RESISTANT, IMPACT RESISTANT BACK, SIDE WIRING HUBBELL[R] BRAND CONTACT MATERIAL 0.037 INCH BRASS OPERATING TEMPERATURE -40 TO 75 DEG C
$
40.70
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:HWS GFRST20W
- DUPLEX TYPE NYLON (FACE)/BASE MATERIAL WHITE COLOR 5-20R CONFIGURATION 3 WIRE(S) COMMERCIAL GRADE 125 V VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) BACK, SIDE WIRING STYLE LINE, AUTOGUARD BRAND POWER RATING 1 HP APPLICABLE STANDARD ADA COMPLIANT APPROVAL UL (CANADA AND US), CSA
$
40.48
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Part #:CONDUIT 2-1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-3/16 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE
$
33.34
Qty:
Part #:CONDUIT 4-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 3-61/64 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 5 INCH TRADE SIZE THREADED END TYPE
$
0.55
Qty:
Displaying: 1 - 24 of 54 Matching Items