Markers & Marking Tapes
Cable & Cord Grips
View:
Active Filters :
Part #:PAND H200X034H1T
- HEAT SHRINK, FLATTENED TYPE POLYOLEFIN MATERIAL WHITE COLOR 0.34 INCH 0.06 INCH MIN. WIRE DIAMETER 0.19 INCH MAX. WIRE DIAMETER 18 TO 12 AWG WIRE SIZE 500 PER ROLL QUANTITY THERMAL TRANSFER PRINTER TYPE
$
621.08
Qty:
Part #:3M 3939-48MMX55M
- ADHESIVE TYPE ADHESIVE RUBBER, POLYETHYLENE FILM BACKING MATERIAL SILVER COLOR 60 YARD 1.88 INCH ISO 9001 APPLICABLE STANDARD PATCHING, BUNDLING, REINFORCING, TABBING, TAPING/SPLICING INSULATION, CAPPING PIPE, SECURING CONDUIT END, MARKING, LABELING, TEMPORARY REPAIR, HEATING, VENTILATING AND AIR CONDITIONING APPLICATION 9 MIL THICKNESS 200 DEG F TEMPERATURE RATING TENSILE STRENGTH 25 POUND PER INCH ELONGATION 17 PERCENT 3939 MODEL
$
26.08
Qty:
Part #:3M 130C-3/4X30FT
- LINERLESS, HIGH VOLTAGE INSULATING TYPE ETHYLENE PROPYLENE RUBBER MATERIAL BLACK FINISH 30 FOOT 0.75 INCH 194 DEG F MAX. CONTINUOUS TEMPERATURE 266 DEG F MAX. SHORT TERM TEMPERATURE 69 KILOVOLT VOLTAGE RATING 30 MIL THICKNESS 750 VOLT PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND ROHS COMPLIANT BREAKING STRENGTH 7.5 INCH-POUND APPLICATION PREMIUM GRADE APPLICABLE STANDARD ASTM D-4388 130C MODEL
$
33.03
Qty:
Part #:PAND S050X125VATY
- SELF-LAMINATING TYPE VINYL MATERIAL 1.25 INCH 0.5 INCH INDOOR/OUTDOOR APPLICATION 5000 QUANTITY WHITE BACKGROUND COLOR THERMAL TRANSFER PRINTER TYPE APPROVAL UL TEMPERATURE RANGE -40 TO 200 DEG F ROHS COMPLIANT S MODEL
$
0.04
Qty:
Part #:PAND H150X034H1T
- HEAT SHRINK, FLATTENED TYPE POLYOLEFIN MATERIAL WHITE COLOR 0.34 INCH 0.06 INCH MIN. WIRE DIAMETER 0.19 INCH MAX. WIRE DIAMETER 18 TO 12 AWG WIRE SIZE 500 PER ROLL QUANTITY THERMAL TRANSFER PRINTER TYPE
$
564.24
Qty:
Part #:PAND JN218-216-MN
- INSULATED TYPE (2) #22 MIN. WIRE COMBINATION SIZE (2) #16 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.29
Qty:
Part #:PAND JN418-212-C
- INSULATED TYPE (4) #18 MIN. WIRE COMBINATION SIZE (2) #12 MAX. WIRE COMBINATION SIZE UL, CSA APPROVAL 100 STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE PAN-TERM[R] BRAND JN MODEL
$
0.89
Qty:
Part #:PAND PCMB-5
- PRE-PRINTED, FULL LENGTH PERFORATED TYPE VINYL CLOTH MATERIAL 1.38 INCH MARKER LENGTH 0.22 INCH MARKER WIDTH A, B, C LEGEND 10 PAGE(S) (150) A, B, C QUANTITY PER LEGEND
$
44.40
Qty:
Part #:PAND PCMB-8
- HALF LENGTH PERFORATED TYPE VINYL CLOTH MATERIAL 1-3/8 INCH MARKER LENGTH +, -, /, 0 TO 90, A TO Z LEGEND 10 PAGE(S) (2) +, -, /, 0, A TO Z, (4) 16 TO 90, (6) 1 TO 15 QUANTITY PER LEGEND PAN-CODE[T] BRAND BACKGROUND COLOR WHITE LEGEND COLOR BLACK TEMPERATURE RANGE -40 TO 250 DEG F WIRE OUTER DIAMETER 3/8 INCH
$
44.40
Qty:
Part #:PAND PCMB-10
- NEMA COLOR, HALF LENGTH PERFORATED TYPE VINYL CLOTH MATERIAL 1-3/8 INCH MARKER LENGTH BLANK LEGEND 10 PAGE(S) (45) 10 NEMA COLOR QUANTITY PER LEGEND PAN-CODE[T] BRAND TEMPERATURE RANGE -40 TO 250 DEG F WIRE OUTER DIAMETER 3/8 INCH
$
47.94
Qty:
Part #:PAND S075X075VATY
- SELF-LAMINATING TYPE VINYL MATERIAL 0.75 INCH 0.75 INCH INDOOR/OUTDOOR APPLICATION 5000 QUANTITY WHITE BACKGROUND COLOR THERMAL TRANSFER PRINTER TYPE
$
0.05
Qty:
closeout
Part #:TB 2251
- CLOSEOUTS Only 15 Left!
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2521
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2921NM
- STRAIGHT TYPE NYLON BODY, RUBBER BUSHING MATERIAL 1-7/32 INCH DIA SIZE UL, CSA APPROVAL DRY/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.31 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURES CORROSION RESISTANT, LIQUIDTIGHT, STRAIN RELIEF OPERATING TEMPERATURE -34 TO 105 DEG C
Part #:PAND PN10-14R-L
- STANDARD TYPE YELLOW COLOR 12 AWG MIN. CONDUCTOR SIZE 10 AWG MAX. CONDUCTOR SIZE UL, CSA APPROVAL 221 DEG F TEMPERATURE RATING 50 STANDARD PACKAGE 1/4 INCH STUD SIZE NYLON INSULATED INSULATION TYPE PAN-TERM[R] BRAND DIMENSION 1.26 INCH LENGTH X 0.52 INCH WIDTH X 0.04 INCH THICK MATERIAL ELECTROLYTIC TIN PLATED COPPER PN MODEL
$
1.46
Qty:
closeout
Part #:TB 5223
- CLOSEOUTS Only 27 Left!
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:PAND PCMB-25
- HALF LENGTH PERFORATED TYPE GMC1 VINYL CLOTH MATERIAL 1.38 INCH MARKER LENGTH 0.22 INCH MARKER WIDTH 0 TO 9, L1, L2, L3, T1, T2, T3 LEGEND 12 PAGE(S) (15) L1, L2, L3, T1, T2, T3, (45) 0 TO 9 QUANTITY PER LEGEND PAN-CODE[T] BRAND BACKGROUND COLOR WHITE LEGEND COLOR BLACK WIRE OUTER DIAMETER 0.38 INCH
$
19.42
Qty:
Part #:TB 2522
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2534
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2922
- STRAIGHT TYPE STEEL BODY/GLAND NUT/GRIP, RUBBER BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF THROAT SIZE 47/64 INCH DIA
Part #:BUR CCD
- COMPRESSION TAP CONNECTOR TYPE HIGH DENSITY POLYETHYLENE MATERIAL D DIE USED ON SNAP-ON INSTALLATION 2-3/4 INCH L CONNECTOR SIZE CRIMPIT[TM] BRAND ROHS COMPATIBLE COLOR BLACK CC MODEL
$
4.44
Qty:
Part #:TB 2209
- 45 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-13/32 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2269
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2270
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Displaying: 1 - 24 of 36 Matching Items