Pvc Schedule 40 Elbows
Cable & Cord Grips
View:
Active Filters :
- Commodity Description: Cable & Cord Grips Pvc Schedule 40 Elbows Tools - Paint, Chemicals, Etc
- Main Menu: Electrical Supplies
Part #:CARLON UA9AJ-CAR
- STANDARD RADIUS TYPE PVC MATERIAL GRAY FINISH 40 SCHEDULE UL 514B/651, ETL, NEC APPROVAL NEMA TC-3, WC1094A APPLICABLE STANDARD 5 STANDARD PACKAGE 2 INCH TRADE SIZE 90 DEG BEND ANGLE PLAIN END STYLE UA MODEL
Part #:CARLON UA9AE
- STANDARD RADIUS TYPE PVC MATERIAL GRAY FINISH 40 SCHEDULE UL 514B/651, ETL, NEC APPROVAL NEMA TC-3, WC1094A APPLICABLE STANDARD 25 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEG BEND ANGLE PLAIN END STYLE UA MODEL
Part #:CRC 02085
- SILICONE TYPE OPAQUE WHITE COLOR ELECTRICAL PANEL, OUTDOOR LIGHTING, SCOREBOARD, TRAFFIC LIGHT, HIGH VOLTAGE POLE, TRANSFORMER, DISCONNECT, SWITCHING MECHANISM, ELECTRICAL CONTACT, SPARK PLUG, BATTERY TERMINAL, FASTENER, O-RING, RUBBER AND PLASTIC PART APPLICATION -70 TO 400 DEG F TEMPERATURE RATING PRESSURIZED TUBE WITH SELECT-A-BEAD NOZZLE CONTAINER TYPE 3.3 OUNCE CONTAINER SIZE NLGI 2 NLGI NUMBER ROHS COMPLIANT UNIT PACKAGE 6 OUNCE BASE TYPE SILICONE ODOR MILD DIELECTRIC STRENGTH GREATER THAN 450 MILLIVOLT BOILING POINT GREATER THAN 392 DEG F MELTING/FREEZING POINT GREATER THAN 572 DEG F PROPELLANT TYPE NITROGEN SPECIFIC GRAVITY 0.97 VAPO
$
37.24
CA
Qty:
Part #:CRC 02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3
$
19.28
CA
Qty:
Part #:CRC 02205
- APPLICATION CONTACT, METAL SWITCH, MOTOR, RELAY, GENERATOR, EDGE CONNECTOR, BUSS BAR, CIRCUIT BREAKER, SCALE AND SENSORS COLOR CLEAR COMPOSITION HFC NT[T], CRC[R] BRAND
$
48.28
CA
Qty:
Part #:CRC 14055
- RTV SILICONE TYPE CLEAR COLOR MIL-A-46106, TT-S-00230C, TT-S-001543A, FDA 21 CFR-175.105 APPLICABLE STANDARD BONDING, PROTECTION AND WATERPROOFING IN HVAC, ELECTRICAL, CONSTRUCTION, METAL WORKING, FILLING GAPS BETWEEN MATING PART, GEARBOX, PUMP, MOTOR AND GENERAL GASKET SEALING APPLICATION -76 TO 400 DEG F TEMPERATURE RATING TUBE CONTAINER TYPE 8 OUNCE CONTAINER CAPACITY 24 HOUR (FULL CURE TIME) SETTING TIME PHYSICAL STATE PASTE ODOR ACETIC ACID BOILING POINT 680 DEG F FLASH POINT 135 DEG C SPECIFIC GRAVITY 1.007 VOC CONTENT 3 PERCENT
$
43.68
CA
Qty:
Part #:CRC 14170
- CLEAR COLOR AIR TOOL, MECHANICAL BRAKE, CLUTCH, CHAIN, WIRE ROPE, MOTOR, DIE, MOLD, PART, BEARING, GENERATOR AND COMPRESSOR APPLICATION BOTTLE CONTAINER TYPE 20 OUNCE CONTAINER CAPACITY 14170 MSDS NUMBER 170 DEG F FLASH POINT PETROLEUM DISTILLATE, CARBON DIOXIDE PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 9.25 INCH HEIGHT CLEANING STRENGTH 32 KILOBYTE DIELECTRIC STRENGTH 58600 VOLT NET FILL 15 OUNCE APPLICABLE STANDARD NSF C1, ISO 9001
$
21.88
CA
Qty:
Part #:CRC 18204
- METAL, CONCRETE, ASPHALT, GRAVEL, SOIL, TREES AND GRASS, UTILITY, RECREATIONAL, MUNICIPAL AND LANDSCAPING SITE, GOLF COURSE, NURSERY AND SURVEYING APPLICATION 410 DEG F (AUTO-IGNITION) TEMPERATURE RATING AEROSOL CONTAINER TYPE 17 OUNCE CONTAINER CAPACITY ALERT ORANGE COLOR/SHADE 0 TO 700 LINEAR FOOT AREA COVERAGE 1 HOUR (FULLY DRY), 30 MINUTE (TACK FREE) TOUCH DRY TIME ROHS COMPLIANT UNIT PACKAGE 20 OUNCE PROPELLANT TYPE HYDROCARBON PHYSICAL STATE LIQUID ODOR AROMATIC BOILING POINT -47.2 DEG F FLASH POINT -2.2 DEG F RELATIVE DENSITY 0.77 TO 0.85
$
15.70
CA
Qty:
Part #:TB 2522
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2534
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2922
- STRAIGHT TYPE STEEL BODY/GLAND NUT/GRIP, RUBBER BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF THROAT SIZE 47/64 INCH DIA
Part #:TB 2209
- 45 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-13/32 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2269
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2270
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2524
- STRAIGHT TYPE DIE CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL LIQUIDTIGHT, STRAIN RELIEF, DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE OPERATING TEMPERATURE 105 DEG C SERIES 2520 MODEL
Part #:TB 2525
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2530
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.125 TO 0.25 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2531
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2535
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2536
- STRAIGHT TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-15/16 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.75 TO 0.88 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2674
- STRAIGHT TYPE MOLDED BLACK NYLON BODY, MOLDED THERMOPLASTIC GLAND AND SEGMENTED CHUCK, MOLDED NEOPRENE BUSHING MATERIAL 1.57 INCH DIA X 3 INCH L SIZE UL, CSA APPROVAL HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.56 TO 0.69 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, STRAIN RELIEF, CORROSION RESISTANT APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552, A-A-50553, WC-586 OPERATING TEMPERATURE -34 TO 105 DEG C
Part #:TB 2565
- STRAIGHT TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 2-3/4 INCH DIA X 2-5/8 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1-1/2 INCH THREAD SIZE 1.375 TO 1.625 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2273
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2520
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.125 TO 0.25 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Displaying: 1 - 24 of 32 Matching Items