Plrs,Wrnch,Drvr,Saw,Pouch,Tool Box
Baseboard Heaters
View:
Active Filters :
- Commodity Description: Baseboard Heaters Plrs,Wrnch,Drvr,Saw,Pouch,Tool Box Tools - Paint, Chemicals, Etc
Part #:MILW 49-66-4705
- MAGNETIC TYPE 1-7/8 INCH OVERALL LENGTH HEAT TREATED PROCESS BLUE HANDLE COLOR 3/8 INCH DRIVE SIZE STEEL SHANK MATERIAL SHOCKWAVE[TM] BRAND
$
4.52
Qty:
Part #:MILW 49-66-4706
- MAGNETIC TYPE 1-7/8 INCH OVERALL LENGTH HEAT TREATED PROCESS BROWN HANDLE COLOR 7/16 INCH DRIVE SIZE STEEL SHANK MATERIAL SHOCKWAVE[TM] BRAND
$
6.46
Qty:
Part #:CRC 02085
- SILICONE TYPE OPAQUE WHITE COLOR ELECTRICAL PANEL, OUTDOOR LIGHTING, SCOREBOARD, TRAFFIC LIGHT, HIGH VOLTAGE POLE, TRANSFORMER, DISCONNECT, SWITCHING MECHANISM, ELECTRICAL CONTACT, SPARK PLUG, BATTERY TERMINAL, FASTENER, O-RING, RUBBER AND PLASTIC PART APPLICATION -70 TO 400 DEG F TEMPERATURE RATING PRESSURIZED TUBE WITH SELECT-A-BEAD NOZZLE CONTAINER TYPE 3.3 OUNCE CONTAINER SIZE NLGI 2 NLGI NUMBER ROHS COMPLIANT UNIT PACKAGE 6 OUNCE BASE TYPE SILICONE ODOR MILD DIELECTRIC STRENGTH GREATER THAN 450 MILLIVOLT BOILING POINT GREATER THAN 392 DEG F MELTING/FREEZING POINT GREATER THAN 572 DEG F PROPELLANT TYPE NITROGEN SPECIFIC GRAVITY 0.97 VAPO
$
37.24
CA
Qty:
Part #:CRC 02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3
$
19.28
CA
Qty:
Part #:CRC 02205
- APPLICATION CONTACT, METAL SWITCH, MOTOR, RELAY, GENERATOR, EDGE CONNECTOR, BUSS BAR, CIRCUIT BREAKER, SCALE AND SENSORS COLOR CLEAR COMPOSITION HFC NT[T], CRC[R] BRAND
$
48.28
CA
Qty:
Part #:CRC 14055
- RTV SILICONE TYPE CLEAR COLOR MIL-A-46106, TT-S-00230C, TT-S-001543A, FDA 21 CFR-175.105 APPLICABLE STANDARD BONDING, PROTECTION AND WATERPROOFING IN HVAC, ELECTRICAL, CONSTRUCTION, METAL WORKING, FILLING GAPS BETWEEN MATING PART, GEARBOX, PUMP, MOTOR AND GENERAL GASKET SEALING APPLICATION -76 TO 400 DEG F TEMPERATURE RATING TUBE CONTAINER TYPE 8 OUNCE CONTAINER CAPACITY 24 HOUR (FULL CURE TIME) SETTING TIME PHYSICAL STATE PASTE ODOR ACETIC ACID BOILING POINT 680 DEG F FLASH POINT 135 DEG C SPECIFIC GRAVITY 1.007 VOC CONTENT 3 PERCENT
$
43.68
CA
Qty:
Part #:CRC 14170
- CLEAR COLOR AIR TOOL, MECHANICAL BRAKE, CLUTCH, CHAIN, WIRE ROPE, MOTOR, DIE, MOLD, PART, BEARING, GENERATOR AND COMPRESSOR APPLICATION BOTTLE CONTAINER TYPE 20 OUNCE CONTAINER CAPACITY 14170 MSDS NUMBER 170 DEG F FLASH POINT PETROLEUM DISTILLATE, CARBON DIOXIDE PROPELLANT COMPOSITION AEROSOL, LIQUID CLEANER TYPE ROHS COMPLIANT UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 9.25 INCH HEIGHT CLEANING STRENGTH 32 KILOBYTE DIELECTRIC STRENGTH 58600 VOLT NET FILL 15 OUNCE APPLICABLE STANDARD NSF C1, ISO 9001
$
21.88
CA
Qty:
Part #:CRC 18204
- METAL, CONCRETE, ASPHALT, GRAVEL, SOIL, TREES AND GRASS, UTILITY, RECREATIONAL, MUNICIPAL AND LANDSCAPING SITE, GOLF COURSE, NURSERY AND SURVEYING APPLICATION 410 DEG F (AUTO-IGNITION) TEMPERATURE RATING AEROSOL CONTAINER TYPE 17 OUNCE CONTAINER CAPACITY ALERT ORANGE COLOR/SHADE 0 TO 700 LINEAR FOOT AREA COVERAGE 1 HOUR (FULLY DRY), 30 MINUTE (TACK FREE) TOUCH DRY TIME ROHS COMPLIANT UNIT PACKAGE 20 OUNCE PROPELLANT TYPE HYDROCARBON PHYSICAL STATE LIQUID ODOR AROMATIC BOILING POINT -47.2 DEG F FLASH POINT -2.2 DEG F RELATIVE DENSITY 0.77 TO 0.85
$
15.70
CA
Qty:
Part #:KLEIN 70591
- FOLDING TYPE 9 PIECE(S) (9) INCH SET SET CONTENT HEX DRIVE STYLE HANDY CARRYING POUCH PACKAGING 5/64 INCH, 3/32 INCH, 7/64 INCH, 1/8 INCH, 9/64 INCH, 5/32 INCH, 3/16 INCH, 7/32 INCH, 1/4 INCH KEY SIZES HANDLE LENGTH 4-3/8 INCH KEY LENGTH 2-11/16 TO 3-13/16 INCH
$
14.40
Qty:
Part #:KLEIN J206-8C
-
Strips and cuts 8-16 AWG solid and 10-18 AWG stranded wire
Long nose for extended reach, grabbing and looping wire
6-32 and 8-32 screw shearing
Induction-hardened cutting knives for hard wire
Hot-riveted joint ensures smooth action with no handle wobble
Forged steel for maximum durability
Spring-loaded for self-opening action
Dual material Journeyman&trade handles provide better grip
$
58.78
Qty:
Part #:KLEIN J2000-9NECR
- HOT-RIVETED JOINT TYPE 9.5 INCH OVERALL LENGTH 1.59375 INCH JAW LENGTH 1.25 INCH JAW WIDTH CUTTING, CRIMPING APPLICATION LIGHT BLUE/BLACK HANDLE COLOR NEW ENGLAND JAW TYPE JOURNEYMAN[T] BRAND 2000 MODEL
$
93.18
Qty:
Part #:KLEIN J248-8
- DIAGONAL TYPE TOOL STEEL MATERIAL BLACK OXIDE FINISH 8 1/8 INCH OVERALL LENGTH 8 1/8 OVERALL LENGTH - FRACTIONAL 13/16 INCH JAW LENGTH 1 3/16 INCH JAW WIDTH 13/16 JAW LENGTH - FRACTIONAL CUTTING APPLICATION HARDENED PROCESS HARDENED TOOL STEEL HANDLE MATERIAL RED/BLACK HANDLE COLOR BEVELED JAW TYPE JOURNEYMAN[T] BRAND WEIGHT 0.61 LB HANDLE FINISH JOURNEYMAN
$
52.90
Qty:
Part #:KLEIN J2000-48
- HOT-RIVETED, HIGH-LEVERAGE TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH 8-1/8 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTTING APPLICATION INDUCTION HARDENED PROCESS LIGHT BLUE/BLACK HANDLE COLOR ANGLED HEAD, DIAGONAL JAW TYPE JOURNEYMAN[TM] BRAND JAW THICKNESS 7/16 INCH CUT MATERIAL ACSR, SCREW, NAIL, HARDENED WIRE SERIES 2000 MODEL
$
62.10
Qty:
Part #:KLEIN J203-8
- TOOL STEEL MATERIAL BLACK OXIDE FINISH 8 9/16 INCH OVERALL LENGTH 8 9/16 OVERALL LENGTH - FRACTIONAL 2 5/16 INCH JAW LENGTH 1 INCH JAW WIDTH 2 5/16 JAW LENGTH - FRACTIONAL CUTTING APPLICATION HARDENED PROCESS HARDENED TOOL STEEL HANDLE MATERIAL YELLOW/BLACK HANDLE COLOR LONG NOSE JAW TYPE JOURNEYMAN[T] BRAND WEIGHT 0.63 LB HANDLE FINISH JOURNEYMAN
$
60.56
Qty:
Part #:KLEIN 85614
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 5 PIECE(S) CARRYING CASE PACKAGING TYPE (1) #0 PHILIPS, (4) 1/16 INCH, 3/32 INCH, 1/8 INCH CABINET SCREWDRIVER SET CONTENT TIP-IDENT[R] BRAND HANDLE TYPE CUSHION GRIP APPLICABLE STANDARD ASME/ANSI
$
77.64
Qty:
Part #:KING 2K2405A
- 22 GAUGE ELECTROGALVANIZED STEEL MATERIAL BAKED ENAMEL FINISH ALMOND COLOR 27 INCH UL (CANADA AND US) APPROVAL APARTMENT CONSTRUCTION APPLICATION 208/240 V VOLTAGE RATING WALL MOUNTING 1.8 AMPERE AT 208 V, 2.1 AMPERE AT 240 V CURRENT RATING 375 W AT 208 V, 500 W AT 240 V POWER RATING BUILT-IN THERMOSTAT CONTROL TYPE ALUMINUM FIN HEATING ELEMENT 187/250 W/FT WATT DENSITY
$
221.22
Qty:
$
37.84
Qty:
Part #:KLEIN 55421BP-14
-
39 pockets for tons of tool storage
Hard, molded front pocket protects safety glasses
Front zipper pocket for small parts and tools
Taller bag and interior pockets allow for long screwdrivers
Fully molded bottom protects from the elements
Orange interior for easy tool visibility
1680d ballistic weave for durability
Shoulder straps with extra padding and handles for easy carrying
$
161.92
Qty:
Displaying: 1 - 18 of 18 Matching Items