Gold Galvanized
Ansi 61 Gray Acrylic Electrocoated Over Phosphatized Surface
View:
Active Filters :
Part #:S-STRUT A208
- U SUPPORT TYPE CARBON STEEL MATERIAL 7-1/4 INCH L SIZE GOLD GALVANIZED FINISH A SERIES CHANNEL USED ON 1-5/8 INCH CHANNEL WIDTH 1/4 INCH THICKNESS HOT ROLLED PROCESS 4 HOLE(S) 9/16 INCH DIA HOLE SIZE HOLE SPACING ON CENTER 1-7/8 INCH HOLE SPACING FROM END 13/16 INCH 200 MODEL
Part #:S-STRUT AB227
- ANGLE TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 1-5/8 INCH OVERALL WIDTH CHANNEL APPLICATION 1/4 INCH THICKNESS 9/16 INCH HOLE HOLE/SLOT SIZE 2-HOLE NUMBER OF HOLES/SLOTS HOLE SPACING ON CENTER 1-7/8 INCH HOLE SPACING FROM END 13/16 INCH 200 MODEL
Part #:S-STRUT H104-3/8X6
- STRAIGHT TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 6 FT OVERALL LENGTH 3/8 INCH NOMINAL DIAMETER 16 TPI CSA APPLICABLE STANDARD LOAD RATING 610 LB H104 MODEL
Part #:S-STRUT A100-1/2
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 1/2 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 13 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.358 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:S-STRUT B100-1/4
- WITH SPRING TYPE MILD STEEL MATERIAL GOLD GALVANIZED FINISH 1/4 INCH NOMINAL DIAMETER 20 TPI CASE HARDENED PROCESS USED ON B SERIES CHANNEL AND INSERT 100 MODEL
Part #:S-STRUT B100-3/8
- SHORT SPRING TYPE STEEL MATERIAL SILVER GALVANIZED FINISH 3/8 INCH NOMINAL DIAMETER USED ON B SERIES CHANNELS AND INSERT 100 MODEL
Part #:S-STRUT H104-1/2X6
- STRAIGHT TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 6 FT OVERALL LENGTH 1/2 INCH NOMINAL DIAMETER 13 TPI CSA APPLICABLE STANDARD LOAD RATING 1130 LB H104 MODEL
Part #:S-STRUT H119-3/8
- STANDARD, HEX TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 1-1/8 INCH 3/8 INCH NOMINAL DIAMETER APPLICATION CHANNEL H119 MODEL
Part #:BLINE2 44E
- FABRICATED STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE LAY-IN WIREWAY TYPE (1) (1.25 INCH-1.5 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) SCREW WIREWAY COVER TYPE 44 MODEL
$
47.60
Qty:
Part #:BLINE2 66E
- FABRICATED STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 6 INCH 6 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE LAY-IN WIREWAY TYPE (1) (1.25 INCH-1.5 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) SCREW WIREWAY COVER TYPE 66 MODEL
$
69.98
Qty:
Part #:CONDUIT 3/4-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 0.922 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 46 POUND PER 100 FOOT WEIGHT 3/4 INCH TRADE SIZE 0.049 INCH WALL THICKNESS PLAIN END STYLE
$
2.10
FT
Qty:
Part #:CONDUIT 1-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 1.163 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 67 POUND PER 100 FOOT WEIGHT 1 INCH TRADE SIZE 0.057 INCH WALL THICKNESS PLAIN END STYLE
$
2.95
FT
Qty:
Part #:CONDUIT 2-1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 2.875 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 559 POUND PER 100 FOOT WEIGHT 2-1/2 INCH TRADE SIZE 0.193 INCH WALL THICKNESS THREADED END STYLE
$
36.14
FT
Qty:
Part #:CONDUIT 1-1/2-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 111 LB PER 100 FT WEIGHT 1 1/2 INCH TRADE SIZE 1 1/2 TRADE SIZE IN INCH 1 1/2 TRADE SIZE - FRACTIONAL
$
6.13
FT
Qty:
Part #:CONDUIT 2-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 2.197 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 148 POUND PER 100 FOOT WEIGHT 2 INCH TRADE SIZE 0.065 INCH WALL THICKNESS PLAIN END STYLE
$
7.18
FT
Qty:
Part #:CONDUIT 2-1/2-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 215 LB PER 100 FT WEIGHT 2 1/2 INCH TRADE SIZE 2 1/2 TRADE SIZE IN INCH 2 1/2 TRADE SIZE - FRACTIONAL
$
12.77
FT
Qty:
Part #:CONDUIT 3-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 260 LB PER 100 FT WEIGHT 3 INCH TRADE SIZE 3 TRADE SIZE IN INCH
$
15.99
FT
Qty:
Part #:CONDUIT 4-IN-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 390 LB PER 100 FT WEIGHT 4 INCH TRADE SIZE 4 TRADE SIZE IN INCH
$
24.84
FT
Qty:
Part #:S-STRUT A100-1/4
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 1/4 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 20 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.238 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:S-STRUT A100-3/8
- WITH SPRING TYPE MILD STEEL MATERIAL GOLD GALVANIZED FINISH 3/8 INCH NOMINAL DIAMETER 16 TPI CASE HARDENED PROCESS SUPERSTRUT. BRAND USED ON A/C SERIES CHANNEL AND INSERT 100 MODEL
Part #:S-STRUT A100-5/16
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 5/16 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 18 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.358 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:CONDUIT 1-1/4-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH UL APPROVAL 96 LB PER 100 FT WEIGHT 1 1/4 INCH TRADE SIZE 1 1/4 TRADE SIZE IN INCH 1 1/4 TRADE SIZE - FRACTIONAL
$
4.05
FT
Qty:
Part #:CONDUIT 1/2-EMT
- STEEL MATERIAL HOT DIP GALVANIZED FINISH 10 FOOT 0.706 INCH OUTER DIAMETER UL 797 APPROVAL ANSI C80.3 APPLICABLE STANDARD 30 POUND PER 100 FOOT WEIGHT 1/2 INCH TRADE SIZE 0.042 INCH WALL THICKNESS PLAIN END STYLE
$
1.18
FT
Qty:
Part #:CONDUIT 1-1/2-GALV-STEEL
- STEEL MATERIAL GALVANIZED FINISH 10 FOOT 1.9 INCH OUTER DIAMETER UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 263 POUND PER 100 FOOT WEIGHT 1-1/2 INCH TRADE SIZE 0.138 INCH WALL THICKNESS THREADED END STYLE
$
12.20
FT
Qty:
Displaying: 1 - 24 of 29 Matching Items