Incandescent Chandeliers
Aluminum Conduit Bodies - Conduit Bodies & Covers - Aluminum
View:
Active Filters :
Part #:KLRK 1FAC
- FLAT TYPE POWDER COATED STAMPED METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL DEVICE MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION HUBBELL[R], KILLARK[R] BRAND
$
10.68
Qty:
Part #:KLRK FCLA
- POWDER COATED CAST METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL BOX MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION SINGLE LID LID TYPE HUBBELL[R], KILLARK[R] BRAND APPLICATION INDOOR, OUTDOOR ENVIRONMENTAL CONDITIONS CORROSIVE, DIRT, DUST, WET INCLUSION GASKET FCL MODEL
$
58.80
Qty:
Part #:KLRK OC-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/8 INCH L X 1 5/8 INCH W X 1 5/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE STRAIGHT HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.98
Qty:
Part #:KLRK OLB-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/4 INCH L X 1 5/8 INCH W X 2 1/2 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
21.60
Qty:
Part #:KLRK OLB-3
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 5/8 INCH L X 2 29/32 INCH W X 1 7/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
30.00
Qty:
Part #:KLRK OLB-6
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 10 INCH L X 4 13/16 INCH W X 3 1/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
102.58
Qty:
Part #:KLRK OT-1
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/8 INCH L X 1 3/8 INCH W X 2 INCH H SIZE IMC/RIGID CONDUIT USED ON 1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.56
Qty:
Part #:KLRK OT-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/16 INCH L X 1 5/8 INCH W X 2 3/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
25.38
Qty:
Part #:KLRK TWOLRL-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/16 INCH L X 1 1/2 INCH W X 3 3/4 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION LRL CONFIGURATION 2 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE 90 DEG HUB LOCATION RIGHT/LEFT SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:KLRK TWOT-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/4 INCH L X 1 1/2 INCH W X 2 5/16 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:QINC TFAS5003VA
- Gentle scrollwork and Tiffany style in a classic pattern brings sophistication to the Asheville Collection. The Tiffany glass is hand assembled using the copper foil method developed by Louis Comfort Tiffany. The Valiant Bronze finish anchors the traditional styling.Glass color in Tiffany lighting products vary in color. No two pieces are identical.
Dimensions
23" W x 22.25" H x 23" D
Light Source
Incandescent
Weight
8.50 lbs
$
407.96
Qty:
Part #:QINC TRG5103OZ
- Trilogy pays homage to Thomas Edison with a vintage inspired filament bulb that is not only nostalgic but also very chic. With the old bronze finish and the clear seedy glass shade Trilogy brings old world style to modern elegance. On trend and classy.
Dimensions
22" W x 16.5" H x 22" D
Light Source
Incandescent
Weight
8.80 lbs
$
338.26
Qty:
closeout
Part #:QINC ER5103BN
- CLOSEOUTS Only 1 Left!
- This metal shaded fixture is an elegant nod to the past. The classic Americana styling adds a nostalgic flair to your home. When hung over a kitchen island or dinette table it provides ample lighting for all your daily tasks. It is available in four fabulous finishes, brushed nickel, imperial silver, palladian bronzeand distressed nickel.
Dimensions
24" W x 15" H x 24" D
Light Source
Incandescent
Weight
7.00 lbs
$
512.50
Qty:
Part #:BLINE2 4424G
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER WASH AND PHOSPHATE UNDERCOAT FINISH 24 INCH 24 LENGTH IN INCH 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2 LENGTH IN FT UL 870, CSA 22.2 APPROVAL NEMA 1, IP30 ENCLOSURE SCREW COVER TYPE (7) 1 INCH BOTTOM, (7) 1 INCH TOP KNOCKOUT(S) B-LINE[R] BRAND APPLICABLE STANDARD IEC 529 HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN 4424 MODEL
$
211.64
Qty:
Part #:BLINE2 4436G
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER WASH AND PHOSPHATE UNDERCOAT FINISH 36 INCH 36 LENGTH IN INCH 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 3 LENGTH IN FT UL 870, CSA 22.2 APPROVAL NEMA 1, IP30 ENCLOSURE SCREW COVER TYPE (11) 1 INCH BOTTOM, (11) 1 INCH TOP KNOCKOUT(S) B-LINE[R] BRAND APPLICABLE STANDARD IEC 529 HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN 4436 MODEL
$
320.48
Qty:
Part #:BLINE2 6624G
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER WASH AND PHOSPHATE UNDERCOAT FINISH 24 INCH 24 LENGTH IN INCH 6 INCH 6 WIDTH IN INCH 6 INCH 6 HEIGHT IN INCH 2 LENGTH IN FT UL 870, CSA 22.2 APPROVAL NEMA 1, IP30 ENCLOSURE SCREW COVER TYPE (7) 1 INCH BOTTOM, (7) 1 INCH TOP KNOCKOUT(S) B-LINE[R] BRAND APPLICABLE STANDARD IEC 529 HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN 6624 MODEL
$
340.52
Qty:
Part #:BLINE2 6648G
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER WASH AND PHOSPHATE UNDERCOAT FINISH 48 INCH 48 LENGTH IN INCH 6 INCH 6 WIDTH IN INCH 6 INCH 6 HEIGHT IN INCH 4 LENGTH IN FT UL 870, CSA 22.2 APPROVAL NEMA 1, IP30 ENCLOSURE SCREW COVER TYPE (15) 1 INCH BOTTOM, (15) 1 INCH TOP KNOCKOUT(S) B-LINE[R] BRAND APPLICABLE STANDARD IEC 529 HEIGHT IN INCH - UOM IN LENGTH IN FT - UOM FT LENGTH IN INCH - UOM IN WIDTH IN INCH - UOM IN 6648 MODEL
$
626.12
Qty:
Part #:BLINE2 44E
- FABRICATED STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE LAY-IN WIREWAY TYPE (1) (1.25 INCH-1.5 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) SCREW WIREWAY COVER TYPE 44 MODEL
$
47.60
Qty:
Part #:BLINE2 66E
- FABRICATED STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 6 INCH 6 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE LAY-IN WIREWAY TYPE (1) (1.25 INCH-1.5 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) SCREW WIREWAY COVER TYPE 66 MODEL
$
69.98
Qty:
Part #:BLINE2 88E
- CODE GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH 8 INCH 8 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE LAY-IN WIREWAY TYPE (1) (1.25 INCH-1.5 INCH) CONCENTRIC KNOCKOUT(S) SCREW WIREWAY COVER TYPE 88 MODEL
$
93.86
Qty:
Part #:KLRK 1FA
- FLAT TYPE STAMPED METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL DEVICE MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION HUBBELL[R], KILLARK[R] BRAND
$
10.22
Qty:
Part #:KLRK FD-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 2 7/8 INCH 2.875 WIDTH IN INCH 4-5/8 INCH 4.625 HEIGHT IN INCH 2 7/8 INCH 2.875 DEPTH IN INCH DEEP SHAPE 3/4 INCH HUB SIZE 1 HUB(S) 1 GANG(S) UL 514-A, CSA C22.2, UL FS WC-586D APPROVAL 28 CU INCH CAPACITY .75 HUB SIZE IN INCH (2) LUGS MOUNTING HARDWARE END HUB LOCATION FD CONFIGURATION TYPE HUBBELL[R], KILLARK[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D, NEMA FB-1 HUB TYPE TAPERED THREADED INCLUSION GROUND SCREW DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HUB SIZE IN INCH - UOM IN WIDTH IN INCH - UOM IN FD MODEL
$
60.30
Qty:
Part #:KLRK OLB-1
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 4 17/32 INCH L X 2 9/32 INCH W X 1 3/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
16.74
Qty:
Part #:KLRK OLR-5
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 8 1/8 INCH L X 2 3/4 INCH W X 3 1/2 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LR CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION RIGHT SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
61.34
Qty:
Displaying: 1 - 24 of 30 Matching Items