Operator Interfaces
All in One Controllers
View:
Active Filters :
Part #:HOR HE-EXL1E3
- Description
Logic engine features 1MB of application memory with a 0.013mS/K logic scan. Online Programming Mode (making logic changes on the fly without going thru stop mode) is supported. Operator Interface features include
640×480 LCD TFT color graphics display with a high resolution resistive touchscreen
4 function keys and a system key
USB 2.0 On-the-Go port (mini-B 5pin) is available for programming
USB 2.0 Host port (A) is available for exchanging files with USB FLASH drives
Two (2) RS-232 and one (1) RS-485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols
Networking features include
Built-in 10/100 Ethernet port
Integrated CsCAN port
All units feature a microSD slot, supporting at least 32GB. COM option expansion modules are supported, including Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. The COM options are independent of the serial ports.
$
2,190.00
Qty:
Part #:HOR HE-XC1E5-110
- Description
Logic engine features 1MB of application memory with a 0.013mS/K logic scan.
Online Programming Mode (making logic changes on the fly without going thru stop mode) is supported.
Operator Interface features include a 320×240 LCD TFT color graphics display with a high resolution resistive touchscreen, 4 function keys and a system key
A USB 2.0 On-the-Go port (mini-B 5pin) is available for programming.
A USB 2.0 Host port (A) is available for exchanging files with USB FLASH drives.
One (1) RS-232 and one (1) 485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols.
Networking features include a built-in 10/100 Ethernet port, and an integrated CsCAN port.
All units feature a microSD slot, supporting at least 32GB.
COM option expansion modules are supported, including Profibus DP, 2ch/4ch Analog Output, Radio Modem, Telephone Modem, and GPRS Cellular Modem. The COM options are independent of the serial ports.
$
853.00
Qty:
Part #:IDEAL 46-400
- DIRECT BURIAL, UNDERGROUND FEEDER CABLE TYPE HEAVY WALL HEAT SHRINKABLE TUBE CONTENTS UL APPROVAL 600 V VOLTAGE RATING 14 TO 8 AWG CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE THERMO-SHRINK[R] BRAND OPERATING TEMPERATURE 105 DEG C
$
33.88
Qty:
Part #:KLE AEPJS1
-
Connects wirelessly via Bluetooth or a wired auxiliary input
32.8-foot (10 m) connectivity range (in open space)
10-Hour battery life
Drop protected up to 6.6-foot (2 m)
Powerful rear magnet holds speaker to metal surfaces (panels, ducts, etc.)
Twist-lock flange mounts to Klein's Lighted Tool Bag (Cat. No. 55431)
1/4-20 threaded mount on bottom allows attachment to any standard tripod
Rated IP45 water/dust resistant
Able to answer calls hands-free with the built-in speakerphone
Includes 1/8-Inch (3.5 mm) stereo auxiliary cable and micro USB-to-standard USB charging cable
$
57.40
Qty:
Part #:HOR HE-XE102
- Features of the XLE Operator Interface include
128×64 graphical display
20-key keypad with function key and numeric entry capability
Logic engine features 256KB of application memory with a 0.7mS/K logic scan.
(2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols
integrated CsCAN port
Removable Mass Storage device
CANopen Master/Slave Support
$
751.00
Qty:
Part #:HOR HEXT105110
- Description
Features of the XLT Operator Interface include
160×128 sunlight readable graphics display
high resolution resistive touchscreen
4 function keys and a system key
(2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols
integrated CsCAN port
Removable Mass Storage device
CANopen Master/Slave Support (available as a field installable firmware update, this removes CsCAN support)
$
926.00
Qty:
Part #:KLEIN 11055
- STRONG GRIPPING SERRATED NOSE TYPE 7-1/8 INCH 10 AWG SOLID, 20 AWG STRANDED MIN. WIRE SIZE 10 AWG SOLID, 12 AWG STRANDED MAX. WIRE SIZE DOUBLE DIPPED COMFORT GRIP, CURVED HANDLE TYPE STEEL CORE, PLASTIC DIPPED HANDLE MATERIAL BLUE/YELLOW HANDLE COLOR
$
32.10
Qty:
Part #:KLEIN 55421BP-14
-
39 pockets for tons of tool storage
Hard, molded front pocket protects safety glasses
Front zipper pocket for small parts and tools
Taller bag and interior pockets allow for long screwdrivers
Fully molded bottom protects from the elements
Orange interior for easy tool visibility
1680d ballistic weave for durability
Shoulder straps with extra padding and handles for easy carrying
$
161.92
Qty:
Part #:EMERSON IC755CSS15CDA
- High PerformanceWith faster processing speeds and morememory, QuickPanel+ delivers high-performancecontrol, visualization, and datahistorian capabilities to maximize productivityand cost efficiency.QuickPanel+ incorporates the latest displaytechnology to enhance the user experience.The capacitive, multi-touch screen is built tolast in an industrial environment, yet is assensitive as the latest smartphone or tablet&mdasheven if the user is wearing gloves. Thewide screen provides vivid, clear imagesand more complete process visualization.
$
5,384.00
Qty:
Part #:LEN 1779804
- LENOX STANDARD HOLE SAW ARBORS & ACCESSORIES
ADDED DURABILITYHardened carbon steel for strengthSTARTS ON CONTACTSplit point pilot drill for faster penetration and less walking
$
18.96
Qty:
Part #:KLEIN D2000-48
- HEAVY DUTY, HIGH LEVERAGE, HOT-RIVETED LOCKING JOINT, DIAGONAL TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 8 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH ACSR, SCREW, NAIL AND MOST HARDENED WIRE, CUTTING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 1-3/8 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL BLUE HANDLE COLOR ANGLED HEAD JAW TYPE HANDLE LENGTH 7-3/8 INCH JAW THICKNESS 7/16 INCH 2000 MODEL
$
52.48
Qty:
Part #:KLEIN D2000-9NECR
- HOT-RIVETED TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS AND MOST HARDENED WIRE APPLICATION FORGED, PRECISION MACHINED, INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL ROYAL BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH 2000 MODEL
$
79.20
Qty:
Part #:HOR HE800DAC202
- Description
MetalSmartStack I/O can only be stacked directly on the back of products supporting metal encased I/O models, such as Classic OCS, RCS, RX ruggedized controller, and Metal FOX. Products are sorted by commonality. All SmartStack I/O modules include spring-clamp style removable terminals except where noted.
$
1,229.00
Qty:
Part #:KLEIN D203-7
- HOT-RIVETED TYPE STEEL MATERIAL 7-3/16 INCH OVERALL LENGTH 2-7/16 INCH JAW LENGTH 11/16 INCH JAW WIDTH CUTTING, LOOPING, WIRE WRAPPING APPLICATION INDUCTION HARDENED PROCESS PLASTIC HANDLE MATERIAL YELLOW HANDLE COLOR LONG NOSE, KNURLED JAW TYPE JAW THICKNESS 3/8 INCH KNIFE LENGTH 1/2 INCH POINT THICKNESS 3/32 INCH
$
40.10
Qty:
Part #:LEN 20578818R
- LENOX METAL CUTTING RECIPROCATING SAW BLADES
POWER BLAST TECHNOLOGY&trade INCREASES BLADE LIFEHigh speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
LONG BLADE LIFE & INCREASED VERSATILITYPatented T2&trade Technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
ADVANCED METAL CUTTING TOOTHFORMSPatented metal cutting TPIs provide faster and more efficient cutting in the widest widest variety of materials including Unistrut, angle iron, black pipe and more
$
29.94
Qty:
Part #:HOR HE800THM100
- Description
MetalSmartStack I/O can only be stacked directly on the back of products supporting metal encased I/O models, such as Classic OCS, RCS, RX ruggedized controller, and Metal FOX. Products are sorted by commonality. All SmartStack I/O modules include spring-clamp style removable terminals except where noted.
$
792.00
Qty:
closeout
Part #:HOR HEX24AS
- CLOSEOUTS Only 1 Left!
- Description
Switching supply that outputs 1.5A at 24 VDC. Mounts on standard DIN-rail. Designed for the XL Family controllers.
$
128.00
Qty:
Part #:KLEIN D248-8
- HIGH LEVERAGE, HOT-RIVETED JOINT, DIAGONAL TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 8-1/16 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTTING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 3/4 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL RED HANDLE COLOR ANGLED HEAD, BEVELED JAW TYPE HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH
$
48.12
Qty:
Part #:HOR HE579ACM300
- The SmartBlock ACM300 is a Power and Energy Monitor that is easy to setup, and provides a variety of advanced features, including 3-phase power monitoring with three current (0-5A CTs) and voltage inputs (480V, direct connect or PTs). CsCAN CAN network connection provides a fast flexible communication path. SmartBlock package allows convenient mounting close to the source to be monitored On board relay allows load shedding, alarming or other local switching.
$
919.00
Qty:
Part #:IDEAL 30-026
- ALUMINUM CONDUIT JOINT, ALUMINUM ELECTRICAL APPLICATION SQUEEZE BOTTLE CONTAINER TYPE 4 OZ CONTAINER CAPACITY NOALOX[R] BRAND APPROVAL UL FOR USE WITH PRESSURE-TYPE WIRE CONNECTOR
$
19.54
Qty:
Part #:LEN 3003636L
- BI-METALSPEED SLOT®HOLE SAW WITH T3 TECHNOLOGY&trade
IMPROVED METAL CUTTING PERFORMANCEIncreased wall thickness improves durability and minimizes tooth lossOptimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOODLarger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVALSPEED SLOTstaircase design for fast, easy plug ejectionvs. Prior LENOX Generation
$
24.90
Qty:
Part #:LEN 3007272L
- BI-METALSPEED SLOT®HOLE SAW WITH T3 TECHNOLOGY&trade
IMPROVED METAL CUTTING PERFORMANCEIncreased wall thickness improves durability and minimizes tooth lossOptimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOODLarger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVALSPEED SLOTstaircase design for fast, easy plug ejectionvs. Prior LENOX Generation
$
81.46
Qty:
Part #:LEN 3087935PD
- LENOX CARBIDE HOLE CUTTERS
ACCURATE, BURR-FREE HOLESPrecision ground carbide teeth for fast cutting of clean, round holesWILL NOT DAMAGE WORKOver-drill stopper prevents the tool from penetrating beyond the holeSTARTS ON CONTACTSplit point pilot bit for faster penetration and less walking
$
20.50
Qty:
Part #:LEN 30908VB8
- LENOX VARI-BIT STEP DRILL BIT
ACCURATE, BURR-FREE HOLESPatented two flute design cuts fast, clean, round holes
STARTS ON CONTACTSplit point design for faster penetration and less walking
LONG TOOL LIFESteam oxide coating adds durabilityEnhanced flute design removes chips rapidly
$
99.32
Qty:
Displaying: 73 - 96 of 112 Matching Items