Operator Interfaces
All in One Controllers
View:
Active Filters :
Part #:MULB 11432
- STEEL MATERIAL 50 PER BOX STANDARD PACKAGE 4 INCH BOX SIZE (1) GFCI RECEPTACLE OPENING TYPE
$
2.80
Qty:
Part #:MULB 11433
- BAKED CADILITE STEEL MATERIAL UL APPROVAL 50 PER CARTON STANDARD PACKAGE 4 INCH BOX SIZE (2) GFCI RECEPTACLE OPENING TYPE 1/2 INCH RAISED DEPTH 1/2 INCH
$
4.80
Qty:
Part #:MULB 11501
- BAKED CADILITE STEEL MATERIAL UL APPROVAL 25 PER CARTON STANDARD PACKAGE 4-11/16 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED DEPTH 1/2 INCH
$
5.68
Qty:
Part #:MULB 11510
- BAKED CADILITE STEEL MATERIAL UL APPROVAL 25 PER CARTON STANDARD PACKAGE 4-11/16 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED DEPTH 1/2 INCH
$
5.76
Qty:
Part #:MULB 11513
- BAKED CADILITE STEEL MATERIAL UL APPROVAL 25 PER CARTON STANDARD PACKAGE 4-11/16 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED DEPTH 1/2 INCH
$
5.76
Qty:
Part #:MULB 30201
- FS TYPE 0.094 INCH HEAVY DUTY DIE-CAST ALUMINUM MATERIAL POWDER COATED FINISH GRAY COLOR 2.75 INCH 4.5 INCH 2 INCH 1/2 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL APPROVAL 18.3 CUBIC INCH CAPACITY (2) CLOSE-UP PLUG, GROUND SCREW MOUNTING HARDWARE (1) EACH END, (1) BACK HUB LOCATION APPLICATION INDOOR, OUTDOOR, DAMP/WET LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION AA-50563
$
5.72
Qty:
Part #:MULB 30206
- 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 2.75 INCH 2.75 WIDTH IN INCH 4.5 INCH 4.5 HEIGHT IN INCH 2 INCH 2 DEPTH IN INCH 114.3 HEIGHT IN MM 69.85 WIDTH IN MM 3/4 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL, CSA APPROVAL SURFACE MOUNTING 19 CU INCH CAPACITY (2) STAMPED ALUMINUM SWIVEL LUGS MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION ROYAL MOUNTIE[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586C INCLUSION (2) CLOSEUP PLUG, GROUND SCREW SERVICE TYPE INDOOR, OUTDOOR STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
8.01
Qty:
Part #:MULB 30224
- 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 2.75 INCH 2.75 WIDTH IN INCH 4.5 INCH 4.5 HEIGHT IN INCH 2 INCH 2 DEPTH IN INCH 114.3 HEIGHT IN MM 69.85 WIDTH IN MM 3/4 INCH HUB SIZE 5 HUB(S) 1 GANG(S) UL, CSA APPROVAL SURFACE MOUNTING 18 CU INCH CAPACITY (2) STAMPED ALUMINUM SWIVEL LUGS MOUNTING HARDWARE (1) BACK, (1) EACH SIDE, (1) EACH END HUB LOCATION ROYAL MOUNTIE[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586C INCLUSION (2) CLOSEUP PLUG, GROUND SCREW SERVICE TYPE INDOOR, OUTDOOR STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
10.39
Qty:
Part #:MULB 30233
- 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 4.5 INCH 4.5 WIDTH IN INCH 4.5 INCH 4.5 HEIGHT IN INCH 2 INCH 2 DEPTH IN INCH 114.3 HEIGHT IN MM 114.3 WIDTH IN MM 1/2 INCH HUB SIZE 3 HUB(S) 2 GANG(S) UL, CSA APPROVAL SURFACE MOUNTING 30.5 TO 31 CU INCH CAPACITY LUG MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586C INCLUSION (2) CLOSEUP PLUG, GROUND SCREW SERVICE TYPE INDOOR, OUTDOOR STANDARD PACKAGE 10 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
11.13
Qty:
Part #:MULB 30263
- 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 4.5 INCH 4.5 WIDTH IN INCH 4.5 INCH 4.5 HEIGHT IN INCH 2 INCH 2 DEPTH IN INCH 114.3 HEIGHT IN MM 114.3 WIDTH IN MM 1/2 INCH HUB SIZE 7 HUB(S) 2 GANG(S) UL, CSA APPROVAL SURFACE MOUNTING 30.5 TO 31 CU INCH CAPACITY LUG MOUNTING HARDWARE (1) BACK, (1) EACH SIDE, (2) EACH END HUB LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586C INCLUSION (2) CLOSEUP PLUG, GROUND SCREW SERVICE TYPE INDOOR, OUTDOOR STANDARD PACKAGE 10 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
17.21
Qty:
Part #:MULB 30278
- FLAT TYPE 0.04 INCH ALUMINUM MATERIAL ANODIZED ALUMINUM FINISH GRAY COLOR 1 GANG(S) UL, CSA APPROVAL BOX MOUNTING VERTICAL MOUNTING POSITION BLANK DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION (2) STAINLESS STEEL SCREWS, GASKET STANDARD PACKAGE 50
$
1.77
Qty:
Part #:MULB 30283
- FLAT TYPE 0.04 INCH ALUMINUM MATERIAL ANODIZED ALUMINUM FINISH GRAY COLOR 2 GANG(S) UL, CSA APPROVAL BOX MOUNTING VERTICAL MOUNTING POSITION BLANK DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION (4) STAINLESS STEEL SCREWS, GASKET STANDARD PACKAGE 50
$
3.51
Qty:
Part #:MULB 30316
- DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 1-1/2 INCH 4 DIAMETER IN INCH 1/2 INCH HUB SIZE 5 HUB(S) UL, CSA APPROVAL 4 INCH DIAMETER STAINLESS STEEL SCREW MOUNTING 15.3 CU INCH CAPACITY 4 PLUG(S) (1) BACK, (4) SIDE HUB LOCATION INCLUSION #10 GROUND SCREW STANDARD PACKAGE 10 DIAMETER IN INCH - UOM IN
$
10.86
Qty:
Part #:MULB 30326
- DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 1-1/2 INCH 4 DIAMETER IN INCH 3/4 INCH HUB SIZE 5 HUB(S) UL, CSA APPROVAL 4 INCH DIAMETER STAINLESS STEEL SCREW MOUNTING 15.3 CU INCH CAPACITY 4 PLUG(S) (1) BACK, (4) SIDE HUB LOCATION INCLUSION #10 GROUND SCREW STANDARD PACKAGE 10 DIAMETER IN INCH - UOM IN
$
12.55
Qty:
Part #:MULB 30361
- RAISED TYPE DIE CAST ZINC MATERIAL BAKED ALUMINUM FINISH GRAY COLOR UL, CSA APPROVAL BOX MOUNTING VERTICAL MOUNTING POSITION (3) 1/2 INCH IPS TAPPED DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION (2) SCREWS, GASKET STANDARD PACKAGE 25
$
4.58
Qty:
Part #:MULB 30367
- ROUND TYPE DIE CAST ZINC MATERIAL 4 INCH DIA SIZE GRAY BAKED ALUMINUM FINISH UL, CSA APPROVAL 1/2 INCH IPS HOLE DIAMETER .5 HOLE DIAMETER IN INCH 1 OUTLET HOLE(S) HOLE DIAMETER IN INCH - UOM IN
$
3.65
Qty:
Part #:MULB 30372
- ROUND TYPE DIE CAST ZINC MATERIAL 4 INCH DIA SIZE GRAY BAKED ALUMINUM FINISH UL, CSA APPROVAL 1/2 INCH IPS HOLE DIAMETER .5 HOLE DIAMETER IN INCH 2 OUTLET HOLE(S) HOLE DIAMETER IN INCH - UOM IN
$
4.22
Qty:
Part #:MULB 30377
- ROUND TYPE DIE CAST ZINC MATERIAL 4 INCH DIA SIZE GRAY BAKED ALUMINUM FINISH UL, CSA APPROVAL 1/2 INCH IPS HOLE DIAMETER .5 HOLE DIAMETER IN INCH 3 OUTLET HOLE(S) HOLE DIAMETER IN INCH - UOM IN
$
4.58
Qty:
Part #:MULB 30480
- SWITCH TYPE 0.04 INCH ALUMINUM MATERIAL BAKED ALUMINUM FINISH 1 GANG(S) UL, CSA APPROVAL BOX, SCREW MOUNTING (1) 125 V 10 AMPERE, 250 V 5 AMPERE SINGLE POLE SWITCH DEVICE TYPE VERTICAL MOUNTING POSITION ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION GASKET, HANDLE STANDARD PACKAGE 25
$
7.50
Qty:
Part #:MULB 30501
- SELF CLOSING TYPE DIE CAST ZINC MATERIAL ALUMINUM FINISH 1 GANG(S) UL, CSA APPROVAL DEVICE MOUNTING HORIZONTAL MOUNTING POSITION DOUBLE LID WITH GASKET LID TYPE (1) COMBINATION DEVICE/DUPLEX RECEPTACLE DEVICE OPENING ENVIRONMENTAL CONDITIONS DAMP LOCATION, WET LOCATION PACKAGING 25 UNITS PER CARTON
$
4.79
Qty:
Part #:MULB 30523
- SELF CLOSING TYPE 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 1 GANG(S) UL, CSA APPROVAL (4) SCREWS, BOX MOUNTING VERTICAL MOUNTING POSITION SINGLE WITH GASKET, LOCK HASP LID TYPE (1) COMBINATION DEVICE/DUPLEX RECEPTACLE DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION SHAFT PACKAGING 25 UNITS PER CARTON USED ON FS BOX
$
11.74
Qty:
Part #:MULB 30535
- SELF CLOSING TYPE 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 1 GANG(S) UL, CSA APPROVAL (4) SCREWS, BOX MOUNTING VERTICAL MOUNTING POSITION SINGLE WITH GASKET, LOCK HASP LID TYPE (1) 2.125 INCH DIA 30 AMPERE DRYER RECEPTACLE/2.125 INCH DIA 50 AMPERE DRYER RECEPTACLE DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION SHAFT PACKAGING 25 UNITS PER CARTON USED ON FS BOX
$
11.74
Qty:
Part #:MULB 30538
- SELF CLOSING TYPE 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 1 GANG(S) UL, CSA APPROVAL (4) SCREWS, BOX MOUNTING VERTICAL MOUNTING POSITION SINGLE WITH GASKET, LOCK HASP LID TYPE (1) GFI RECEPTACLE DEVICE OPENING ENVIRONMENTAL CONDITIONS WET LOCATION INCLUSION SHAFT PACKAGING 25 UNITS PER CARTON USED ON FS BOX
$
12.21
Qty:
Part #:MULB 30584
- 0.094 INCH DIE CAST ALUMINUM MATERIAL BAKED ALUMINUM FINISH GRAY COLOR 2.75 INCH 2.75 WIDTH IN INCH 4.5 INCH 4.5 HEIGHT IN INCH 2.625 INCH 2.625 DEPTH IN INCH 114.3 HEIGHT IN MM 69.85 WIDTH IN MM 3/4 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL, CSA APPROVAL SURFACE MOUNTING 23 CU INCH CAPACITY (2) STAMPED ALUMINUM LUGS MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION ROYAL MOUNTIE[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586C INCLUSION (2) CLOSEUP PLUG, GROUND SCREW SERVICE TYPE INDOOR, OUTDOOR STANDARD PACKAGE 10 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
14.10
Qty:
Displaying: 25 - 48 of 115 Matching Items