Automation Controllers
All in One Controllers
View:
Active Filters :
- Main Category: All in One Controllers Automation Controllers Operator Interfaces Wire
$
12.00
M
Qty:
$
3.82
M
Qty:
$
4.15
M
Qty:
$
5.10
M
Qty:
Part #:SOOW ASOW104BLK250C
- 10/4 SOOW Flexible Cord applications include portable tools and equipment, portable appliances, small motors and associated machinery
Also Known As10-4 SO Cord, Generator Cord, Rubber Cord, 10 Gauge 4 Wire Cord.
FeaturesExcellent resistance to oil and moisture. Good tensile strength, elongation and aging characteristics. High flexibility. Excellent abrasion resistance. Sunlight-resistant. UL Listed and CSA Certified for indoor and outdoor use. Temperature range -40ºC to +90ºC
StandardsUL Flexible Cord - UL Subject 62CSA Flexible Cord - C22.2-49MSHA ApprovedRoHS Compliant
ConstructionConductors18 through 2 AWG fully annealed stranded bare copper per ASTM B-174InsulationPremium-grade, color-coded 90ºC EPDM.
Color Code4 Conductors &ndash Black, White, Red, Green
$
3.95
M
Qty:
Part #:HOR HEXT105110
- Description
Features of the XLT Operator Interface include
160×128 sunlight readable graphics display
high resolution resistive touchscreen
4 function keys and a system key
(2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols
integrated CsCAN port
Removable Mass Storage device
CANopen Master/Slave Support (available as a field installable firmware update, this removes CsCAN support)
$
926.00
Qty:
Part #:TGGT 12WH500R
-
600V, 250C
Stranded nickle-plated copper
PTFE Tape with glass serve
Impregnated glass braid jacket
UL/CSA, RoHS
Internal wiring of cooking appliances
Applications where heat and moisture resistance and flexibility is required
$
2.05
M
Qty:
Part #:THHN 12BKS500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.17
M
Qty:
Part #:THHN 12BLUSOLCU4500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.19
M
Qty:
Part #:THHN 12OE2500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.15
M
Qty:
Part #:THHN 12RDS500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.17
M
Qty:
closeout
Part #:THHN 12WES500
- CLOSEOUTS Only 1500 Left!
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.17
M
Qty:
$
0.81
M
Qty:
$
1.93
M
Qty:
Part #:SJOW ASJO123BLK250S
- SJOOW Flexible Portable Cord applications include portable tools and equipment, portable appliances, small motors and associated machinery.
FeaturesExcellent resistance to oil and moisture. Good tensile strength, elongation and aging characteristics. High flexibility. Excellent abrasion resistance. Water-resistant. UL Listed and CSA Certified for indoor and outdoor use. Sunlight-resistant. Temperature range -40ºC to +90ºC
StandardsUL Flexible Cord - UL Subject 62CSA Flexible Cord - C22.2-49MSHA ApprovedRoHS Compliant
ConstructionConductors18 through 10 AWG fully annealed stranded bare copper per ASTM B-174InsulationPremium-grade, color-coded 90ºC EPDM.
Specifications
Size12 AWGNumber of Conductors3Conductor Strand65/30Insulation Thickness0.76 mm / 0.030 inchesOutside Diameter10.92 mm / 0.430 inchesWeight0.15 lbs per ftCurrent Amps25
Color Code3 Conductors Black, White, Green
$
1.35
FT
Qty:
Part #:SOOW ASOW123BLK250C
- SOOW Flexible Cord applications include portable tools and equipment, portable appliances, small motors and associated machinery
FeaturesExcellent resistance to oil and moisture. Good tensile strength, elongation and aging characteristics. High flexibility. Excellent abrasion resistance. Sunlight-resistant. UL Listed and CSA Certified for indoor and outdoor use. Temperature range -40ºC to +90ºC
StandardsUL Flexible Cord - UL Subject 62CSA Flexible Cord - C22.2-49MSHA ApprovedRoHS Compliant
ConstructionConductors18 through 2 AWG fully annealed stranded bare copper per ASTM B-174InsulationPremium-grade, color-coded 90ºC EPDM.
Specifications
Size12 AWGNumber of Conductors3Conductor Strand65/30Insulation Thickness0.045 inchesOutside Diameter0.595 inchesWeight0.223 lbs per ftCurrent Amps25
Color Code3 Conductors &ndash Black, White, Green
$
3.36
M
Qty:
Part #:SJOOW ASJOW124BLK25
- SJOOW Flexible Portable Cord applications include portable tools and equipment, portable appliances, small motors and associated machinery.
FeaturesExcellent resistance to oil and moisture. Good tensile strength, elongation and aging characteristics. High flexibility. Excellent abrasion resistance. Water-resistant. UL Listed and CSA Certified for indoor and outdoor use. Sunlight-resistant. Temperature range -40ºC to +90ºC
StandardsUL Flexible Cord - UL Subject 62CSA Flexible Cord - C22.2-49MSHA ApprovedRoHS Compliant
ConstructionConductors18 through 10 AWG fully annealed stranded bare copper per ASTM B-174InsulationPremium-grade, color-coded 90ºC EPDM.
Specifications
Size12 AWGNumber of Conductors4Conductor Strand65/30Insulation Thickness0.76 mm / 0.030 inchesOutside Diameter12.07 mm / 0.475 inchesWeight0.18 lbs per ftCurrent Amps20
Color Code4 Conductors Black, White, Red, Green
$
4.48
M
Qty:
$
3.61
FT
Qty:
Part #:EMERSON IC694TBB132
- High Density 32 Point Terminal Block Box Style with Extended Shroud for Large Wiring Bundles
$
91.00
Qty:
Part #:MTW 14BK2500
- 14 AWG MTW Stranded Wire, 600V
Type conductors are primarily used in control cabinets, in machine tool applications and appliance wiring applications. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations.
Bare Copper StrandingE315270 14 AWG (UL) MTW OR THHW OR BC-5W2 OR AWM 1011/1015/1230/1335 600V OR 1032/10269 1000V, VW-1---240954 CSA TEW 600V OR AWM 1 A/B 105C 1000V FT-1---SAE J1128 TYPE GPT
Specifications
Size14 AWGNumber of Strands19 or 41Temp105°CInsulation Thickness0.030 inchesOutside Diameter0.132 inchesVoltage600V
$
0.32
M
Qty:
Part #:TGGT 14WH500R
-
600V, 250C
Stranded nickle-plated copper
PTFE Tape with glass serve
Impregnated glass braid jacket
UL/CSA, RoHS
Internal wiring of cooking appliances
Applications where heat and moisture resistance and flexibility is required
$
0.78
M
Qty:
Part #:EMERSON IC695PSA140
- Universal Bases Power Supplies The RX3i power supply modules simply snap in just like I/O, and they work with any model CPU.Each version provides auto-ranging so there is no need to set jumpers for different incoming powerlevels, and they are current limiting so a direct short will shut the power supply down to avoiddamage to the hardware. Advanced diagnostics and built-in smart switch fusing are among theother performance and safety features. The multipurpose power supplies can be configured forincremental capacity or redundancy.
Multipurpose PowerSupply, 120/240 VAC, 125VDC. Supports multiplemulti-purpose powersupplies.
$
994.00
Qty:
Displaying: 97 - 120 of 249 Matching Items