Automation Controllers
All in One Controllers
View:
Active Filters :
- Main Category: All in One Controllers Automation Controllers Generators Wire
Part #:EMERSON IC694ACC310
- GE IC694ACC310 Filler Module, Blank Slot, PACSystems RX3i
$
66.00
Qty:
Part #:EMERSON IC695CPE310
- CPUs The high-performance CPU is based on the latest technology processor with fast computation andhigh throughput. The controller can manage up to 32K of I/O in a number of standard languages.The powerful CPU enables complex applications to be easily solved with the high performanceprocessor and up to 64 Mbytes of user memory. The RX3i supports multipleIEC languages andC programming to give you program flexibility. The RX3i increases machine cycle times, reducesdowntime with its extensive diagnostics and hot swap capability, and enables you to store largeamounts of data to reduce external hardware cost.
RX3i CPU with built-in USB Master port,Ethernet port and 2 serial ports
$
5,663.00
Qty:
Part #:EMERSON IC695ALG312
- Isolated Thermocouple Input module provides twelve isolateddifferential thermocouple input channels. Each channel canbe individually configured for inputs from Thermocouple typesJ, K, T, E, R, S, B, N, or C and Voltage ±150mV or ±50mV.
Millivolt I/O Modules The Millivolt Input Modules allow Millivolt level signals, such as bridged strain gages(load cells) to be directly connected to the PLC without external signal processing(transducers, transmitters, etc.) All analog and digital processing of the signal isperformed on the module.
$
3,908.00
Qty:
Part #:EMERSON IC695CPE330
- CPUs The high-performance CPU is based on the latest technology processor with fast computation andhigh throughput. The controller can manage up to 32K of I/O in a number of standard languages.The powerful CPU enables complex applications to be easily solved with the high performanceprocessor and up to 64 Mbytes of user memory. The RX3i supports multipleIEC languages andC programming to give you program flexibility. The RX3i increases machine cycle times, reducesdowntime with its extensive diagnostics and hot swap capability, and enables you to store largeamounts of data to reduce external hardware cost.
RX3i CPU (only)with Ethernet port
$
7,898.00
Qty:
Part #:SER 40404020AL500R
-
For use in almost all applications where type SE cable is allowed
For wet or dry locations up to 90C or 194F
600-volt maximum
$
5.59
M
Qty:
Part #:EMERSON IC694MDL340
- PACSystems RX3i ACVoltage Output Module,120 VAC,0.5A, 16 Point Output
Discrete I/O Modules (Output) Input modules provide the interface between the PLC and external input devices such as proximitysensors, push buttons, switches, and BCD thumbwheels. Output modules provide the interfacebetween the PLC and external output devices such as contactors, interposing relays, BCD displaysand indicator lamps. GE offers a variety of modules that support different voltage ranges andtypes, current capacity, isolation and response time to meet your application needs.
$
708.00
Qty:
Part #:WIRE UF-B-8/3-CU-WG-500S/R
- UF-B TYPE 500 FT 1059 MIL X 319 MIL OUTER DIAMETER ANNEALED SOFT COPPER CONDUCTOR MATERIAL UL 83/493 APPROVAL 600 V VOLTAGE RATING 40 AMPERE CURRENT RATING 90 DEG C TEMPERATURE RATING 344 LB/MFT WEIGHT 3 CONDUCTOR(S) PVC INSULATION MATERIAL WITH GROUND WIRE 8 AWG CONDUCTOR SIZE NYLON JACKET MATERIAL SPOOL/REEL PACKAGE TYPE 7 STRANDS STRANDING 10 AWG GROUND CONDUCTOR SIZE
$
34.79
FT
Qty:
Part #:THHN 350BK500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
12.42
M
Qty:
Part #:EMERSON IC695PSD140
- Universal Bases Power Supplies The RX3i power supply modules simply snap in just like I/O, and they work with any model CPU.Each version provides auto-ranging so there is no need to set jumpers for different incoming powerlevels, and they are current limiting so a direct short will shut the power supply down to avoiddamage to the hardware. Advanced diagnostics and built-in smart switch fusing are among theother performance and safety features. The multipurpose power supplies can be configured forincremental capacity or redundancy.
Multipurpose PowerSupply, 24 VDC. Supportsmultiple multi-purposepower supplies.
$
693.00
Qty:
closeout
Part #:EMERSON IC693ALG391
- CLOSEOUTS Only 2 Left!
- Analog Output, Current/Voltage, 2 Channel
Analog I/O Modules (Output) GE offers easy-to-use analog modules for control processes such as flow, temperatureand pressure.
$
1,800.00
Qty:
Part #:EMERSON IC694ALG392
- PACSystems RX3i Analog Output,Current/Voltage, 8 Channel
Analog I/O Modules (Output) GE offers easy-to-use analog modules for control processes such as flow, temperatureand pressure.
$
1,732.00
Qty:
Part #:SAB 39550340
-
Type
European Standardized Cables
Segment
<HAR> Rubber Cordage
Series
H07RN-F
Gauge (AWG)
12
Conductor Count
3
Voltage
750
Insulation
Rubber
Jacket Material
Rubber
Jacket Color
Black
Approvals
RoHS, CE, <HAR>
$
8.70
Qty:
Part #:CAT 5E4PR
- Blue category 5e non-plenum cable, 1000 feet.
All pair counts meet Cat 5e Power Sum backbone transmission requirements
Suitable for high-speed data transmission
Third-party verified for guaranteed performance
24 AWG solid bare annealed copper
ANSI/TIA/EIA 568 B.2,ICEA S-90-661, UL & C(UL) Type CMR (UL 1666) for Non-Plenum, UL 444, RoHS Compliant
$
0.24
M
Qty:
Part #:THHN 4GN500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
2.58
M
Qty:
Part #:THHN 4OBK500
- APPLICATIONS
Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
9.35
FT
Qty:
Part #:USE 40BKSTAL1000R
- USE/RHH/RHW Underground service entrance cable in black color, has 18-Strand aluminum conductor of size 4/0 AWG. It features 80-mil cross-linked polyethylene insulation that offers resistance against moisture, heat and sunlight. Cable has voltage rating of 600 Volts and current rating of 205 Amps. It has outer diameter of 635 mil. Cable withstands temperature rating of 90 deg C in dry conditions. Cable is UL listed, RoHS/REACH compliant, NEMA rated and meets ASTM standards.
$
1.09
M
Qty:
$
614.00
Qty:
Part #:SEU 404020AL500R
- Aluminum SEU cable is primarily used as panel feeder in multiple unit dwellings and for branch circuits. Maximum operating temperature is not to exceed 90°C in wet locations. Voltage rating is 600 volts.
ConstructionConductor - Aluminum SEU cable has a compact strand soft drawn 8000 series aluminum conductor, per ASTM B-801
Insulation - Aluminum SEU cable has a type XHHW-2 cross linked polyethylene (XLP) insulation. The conductors are cabled together with an aluminum alloy concentric neutral and covered with a reinforced binder tape.
Jacket - Aluminum SEU cable has a gray sunlight resistance polyvinyl chloride (PVC) jacket.
StandardsUL 44, 854Federal Specification J-C - 30BAmpacities based on National Electric Code, 2005 edition, section 310-1560°C when terminated to equipment for circuits rated 100amps or less or marked for 14ga through 1ga conductors70°C when terminated to equipment for circuits rated over 100amps or marked for conductors larger than 1ga90°C wet or dry locations For dwelling units, conductors shall be permitted at listed Ampacities to be utilized as 120/240 volt, 3-wire, single phase service conductors that supply the total load
Specifications
Insulated Conductor Size4/0Bare Neutral Size2/0Outside Diameter0.818 inchesAmpacity205 amps @90°CNet Weight1.003 lbs/ft
$
4.00
M
Qty:
Part #:NMB 63WG500R
- 6-3 W/G NM-B Wire Black
Non-metallic sheathed NM-B cable is used in normally dry installations in residential wiring, as branch circuits for outlets, lighting and other residential loads. Its applications are outlined in NEC 2008 and NEC 2011 Article 334. NM-B is rated at 600 volts and although it is rated at a conductor temperature of 90°C dry , its ampacity is limited to 60°C according to the NEC 2008 and NEC 2011. It may be fished through masonry or tile walls, where not exposed or subject to excessive moisture or dampness. NM-B cables are LEAD FREE and RoHS compliant. Equivalent to Romex NM-B.
StandardsMeets or exceeds all applicable ASTM specificationsUL 83 Thermoplastic Insulated Wires and CablesUL 719 Non-Metallic CablesFederal Specification A-A-59544 and requirements of the NEC.Voltage rating - 600 volts.
ConstructionConductorsSolid 14 to 10 AWG annealed soft bare copper per ASTM B3.Stranded 8 AWG and larger annealed soft bare copper per ASTM B3 and B8.InsulationColor coded polyvinyl chloride (PVC) compound with a nylon covering meeting the required thickness of Type THHN. Conductor insulation is rated 90°C.GroundSoft, bare copper solid per ASTM B3 and stranded per ASTM B3 and B8Sheath30 mil color coded PVC sheath rated 90C is applied over the completed assembly
Specifications
Size6 AWGNumber of Conductors3PVC Insulation Thickness0.76 mm / 0.029 inchesGround Wire Size10 AWGNylon Thickness0.13 mm / 0.005 inchesNominal Cable Dimensions16.0 mm / 0.62 inchesWeight per foot0.357 lbsAllowable Ampacity55 Amps
$
4.92
M
Qty:
Part #:THHN 6WE500
- Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
1.22
M
Qty:
Part #:THHN 8GN500
- Southwire Type THHN or THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the 2008 National Electrical Code. When used as Type THHN, or T90 Nylon conductor is suitable for use in dry locations at temperatures not to exceed 90 °C. When used as Type THWN-2 or TWN75, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90 °C or not to exceed 75 °C when exposed to oil or coolant. When used as Type MTW, conductor is suitable for use in wet locations or when exposed to oil or coolant at temperatures not to exceed 60 °C or dry locations at temperatures not to exceed 90 °C (with ampacity limited to that for 75 °C conductor temperature per NFPA 79). Conductor temperatures not to exceed 105 °C in dry locations when rated AWM and used as appliance wiring material or when used asT90 Nylon. Voltage for all applications is 600 volts.
$
0.92
M
Qty:
Displaying: 193 - 216 of 258 Matching Items