21100
5500
Part #:GE CR420KA3
- CR420K SERIES GENERAL PURPOSE PLUG-IN RELAY USED ON 10 AMPERE AT 250 VAC/24 VDC, 7A AT 250 VAC, 1/2 HP AT 240 VAC, 1/3 HP AT 120 VAC CONTACT RATING UL, CSA, CE APPROVAL DIN RAIL/PANEL MOUNTING 3 POLE(S) CARRY CURRENT 10 AMPERE MAXIMUM CONTACT VOLTAGE 220 VAC, 110 VDC CONTACT CONFIGURATION 3PDT CR420K MODEL
$
8.00
Qty:
Part #:CONDUIT 3/4X3-GALV-NIP
- STRAIGHT TYPE STEEL MATERIAL GALVANIZED FINISH 3 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 3/4 INCH TRADE SIZE THREADED END TYPE
$
1.72
Qty:
Part #:STL-CTY 501
- WIDE THROAT TYPE MALLEABLE IRON MATERIAL BRIGHT ZINC ELECTROPLATED FINISH 7/8 INCH MIN. JAW CAPACITY 29/32 INCH MAX. JAW CAPACITY CONDUIT, HANGING ROD APPLICATION 800 POUND LOAD CAPACITY 5/16 INCH-18 TPI SCREW SIZE HEX HEAD, CUP POINT, CAP SCREW SCREW TYPE YES SUPPLIED WITH SCREW OVERALL DIMENSION 1-5/8 INCH LENGTH X 1-1/2 INCH WIDTH APPROVAL CSA
Part #:CONDUIT 1-IN-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 20 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS
$
8.74
Qty:
Part #:CONDUIT 1-1/2-90DEG-GALV-ELBOW
- STEEL MATERIAL GALVANIZED FINISH 10 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS
$
0.33
Qty:
Part #:CONDUIT 1XCLOSEX1-1/2-GALV-NIP
- STRAIGHT, CLOSE TYPE STEEL MATERIAL GALVANIZED FINISH 1-1/2 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1 INCH TRADE SIZE THREADED END TYPE
$
1.80
Qty:
Part #:CONDUIT 1/2-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 1-5/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 1/2 INCH TRADE SIZE THREADED END TYPE
$
1.46
Qty:
Part #:CONDUIT 1-IN-GALV-CPLG
- GALVANIZED STEEL MATERIAL 1-31/32 INCH RIGID CONDUIT USED ON 1.53 INCH DIAMETER 1 INCH TRADE SIZE
$
2.64
Qty:
Part #:CONDUIT 1-1/4-GALV-CPLG
- GALVANIZED STEEL MATERIAL 2-1/32 INCH RIGID CONDUIT USED ON 1.87 INCH DIAMETER 1-1/4 INCH TRADE SIZE
$
3.20
Qty:
Part #:STL-CTY 503SC
- I TYPE MALLEABLE IRON MATERIAL SILVER ELECTROPLATED FINISH 1 INCH MAX. JAW CAPACITY HANGING ROD APPLICATION 1300 LB LOAD CAPACITY 1/2 INCH-13 TPI SCREW SIZE SQUARE HEAD SCREW TYPE YES SUPPLIED WITH SCREW APPROVAL CSA BASE SIZE 2-1/2 INCH L X 2-5/8 INCH W
Part #:SEL-SW SS207-7A-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.2 INCH D X 1.312 INCH H SIZE 0.688 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
17.14
Qty:
Part #:SEL-SW SS208-16-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.187 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.468 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
21.88
Qty:
Part #:SEL-SW SS206S-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.107 INCH D X 1.134 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
9.45
Qty:
Part #:SEL-SW SS206A-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.003 INCH D X 1.315 INCH H SIZE 0.64 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED OFF/MOMENTARY ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 15 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
15.32
Qty:
Part #:CONDUIT 2-1/2-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2-1/2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS
$
0.84
C
Qty:
Part #:DOTTIE 14H114
- 1-1/4 INCH ANCHOR LENGTH 3/16 INCH DRILL SIZE HEX HEAD TYPE 1/4 INCH ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE SLOTTED APPLICATION CONCRETE HI-LOW THREAD INCLUDES DRILL
$
0.67
Qty:
Part #:DOTTIE 14H134
- 1-3/4 INCH ANCHOR LENGTH 3/16 INCH DRILL SIZE HEX HEAD TYPE 1/4 INCH ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE SLOTTED APPLICATION CONCRETE HI-LOW THREAD INCLUDES DRILL
$
0.78
Qty:
Part #:DOTTIE K6CO
- TAPPER TYPE 1 INCH SCREW LENGTH #10 SCREW SIZE 1/4 INCH DRILL SIZE #8-10-12 ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE PHILLIPS/SLOTTED COLOR RED INCLUDES (100) SHEET METAL SCREW, (100) ANCHOR, (1) CARBIDE MASONRY DRILL
$
31.78
Qty:
Part #:GE CR420MPC044J
- AC OPERATED TYPE 4PDT CONTACT CONFIGURATION UL, CSA, CE APPROVAL SOCKET MOUNTING 120 VAC COIL VOLTAGE 5 AMPERE CONTACT CURRENT RATING 240 VAC, 28 VDC CONTACT VOLTAGE RATING APPLICATION INDUSTRIAL EQUIPMENT, MACHINE TOOL, HVAC, LIGHTING, VENDING, COMMERCIAL APPLIANCE, ELEVATOR AND SPA CONTROL WITH PUSH TO TEST, LED INDICATOR OPERATING TEMPERATURE -25 TO 70 DEG C 420M MODEL
$
14.00
Qty:
Part #:GE CR420NA2
- CR420N SERIES GENERAL PURPOSE PLUG-IN RELAY USED ON 10 AMPERE AT 240 VAC/24 VDC (RESISTIVE), 5 AMPERE AT 240 VAC/24 VDC (INDUCTIVE), 1/2 HP AT 240 VAC, 1/3 HP AT 120 VAC CONTACT RATING UL, CSA, CE APPROVAL DIN RAIL/PANEL MOUNTING 2 POLE(S) CARRY CURRENT 10 AMPERE MAXIMUM CONTACT VOLTAGE 240 VAC, 110 VDC CONTACT CONFIGURATION DPDT CR420N MODEL
$
7.00
Qty:
Part #:GE CR420KA2
- CR420K SERIES GENERAL PURPOSE PLUG-IN RELAY USED ON 10 AMPERE AT 250 VAC/24 VDC, 7 AMPERE AT 250 VAC, 1/2 HP AT 240 VAC, 1/3 HP AT 120 VAC CONTACT RATING UL, CSA, CE APPROVAL DIN RAIL/PANEL MOUNTING 2 POLE(S) CARRY CURRENT RATING 10 AMPERE MAXIMUM CONTACT VOLTAGE RATING 220 VAC, 110 VDC CONTACT CONFIGURATION DPDT MODEL CR420K MODEL
$
5.00
Qty:
Part #:CONDUIT 2-IN-90DEG-GALV-ELBOW
- STANDARD RADIUS TYPE STEEL MATERIAL GALVANIZED FINISH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS
$
46.96
Qty:
Part #:CONDUIT 1/2X10-GALV-NIP
- THREADED MALE TYPE GALVANIZED STEEL MATERIAL 10 INCH IMC/RIGID CONDUIT USED ON UL6, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
10.38
Qty:
Part #:CONDUIT 2-IN-GALV-CPLG
- STEEL MATERIAL GALVANIZED FINISH 2-1/8 INCH UL 6 APPROVAL ANSI C80.1 APPLICABLE STANDARD 2 INCH TRADE SIZE THREADED END TYPE
$
5.10
Qty:
Displaying: 1 - 24 of 50 Matching Items