42210
6621
Part #:GE P9XER4RAN
- EMERGENCY STOP, MUSHROOM, ROUND TYPE 22.5 MILLIMETER SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE PLASTIC BODY MATERIAL TEMPERATURE RATING -25 TO 70 DEG C APPLICABLE STANDARD UL, CSA P9 MODEL
$
28.20
Qty:
Part #:GE P9CPNNG
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE BLACK COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CPNVG
- STANDARD, ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CPNRS
- STANDARD, ROUND EXTENDED TYPE 22.5 MM SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE FINGER SAFE P9 MODEL
$
8.50
Qty:
Part #:GE P9CER4RN
- MUSHROOM 40 MILLIMETER DIAMETER TYPE 22.5 MILLIMETER SIZE RED COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL CONTACT RATING 600 VOLT AC 10 AMP, 300 VOLT DC 2.5 AMP P9 MODEL
$
38.50
Qty:
Part #:GE P9CPLVGD
- ROUND FLUSH TYPE 22.5 MM SIZE GREEN COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
Part #:GE P9CPLGGD
- ROUND FLUSH TYPE 22.5 MM SIZE YELLOW COLOR NEMA 1/3/3R/3S/4/4X/12/13, IP66 ENCLOSURE POLYAMIDE/ACETAL BODY MATERIAL POLISHED CHROME BEZEL MATERIAL C-2000[T] BRAND APPROVAL UL 508, CSA C22.2, CE APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F WITH DIFFUSED LENS P9 MODEL
$
11.50
Qty:
Part #:KLEIN 32476
- SLOTTED, PHILLIPS TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH HEAT TREATED PROCESS PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR 3-16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND HANDLE TYPE CUSHION GRIP KIT CONTENTS 5/16 INCH NUT DRIVER
$
16.04
Qty:
Part #:KLEIN D213-9NE
- HIGH LEVERAGE, HOT-RIVETED JOINT, LOCKING JOINT TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH COPPER, ALUMINUM AND OTHER SOFT METAL, CUTTING, GRIPPING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 1-3/8 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL DARK BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE KNIFE LENGTH 25/32 INCH HANDLE LENGTH 5-11/16 INCH JAW THICKNESS 5/8 INCH
$
51.38
Qty:
Part #:KLEIN D213-9NE-CR
- HOT-RIVETED TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, HARDENED WIRE, CRIMPING, GRIPPING APPLICATION INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL YELLOW HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH
$
60.50
Qty:
Part #:KLEIN D203-7
- HOT-RIVETED TYPE STEEL MATERIAL 7-3/16 INCH OVERALL LENGTH 2-7/16 INCH JAW LENGTH 11/16 INCH JAW WIDTH CUTTING, LOOPING, WIRE WRAPPING APPLICATION INDUCTION HARDENED PROCESS PLASTIC HANDLE MATERIAL YELLOW HANDLE COLOR LONG NOSE, KNURLED JAW TYPE JAW THICKNESS 3/8 INCH KNIFE LENGTH 1/2 INCH POINT THICKNESS 3/32 INCH
$
38.56
Qty:
Part #:KLEIN D203-8
- HOT-RIVETED, HEAVY DUTY TYPE STEEL MATERIAL 8-7/16 INCH OVERALL LENGTH 2-5/16 INCH JAW LENGTH 1 INCH JAW WIDTH CUTTING APPLICATION INDUCTION HARDENED PROCESS YELLOW HANDLE COLOR LONG NOSE, SIDE CUTTING JAW TYPE JAW THICKNESS 1/2 INCH KNIFE LENGTH 5/8 INCH HANDLE FINISH PLASTIC DIPPED POINT THICKNESS 1/8 INCH
$
45.96
Qty:
Part #:KLEIN D2000-28
- HOT-RIVETED, HIGH-LEVERAGE, HEAVY DUTY TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH 8-1/16 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTTING APPLICATION INDUCTION HARDENED PROCESS ROYAL BLUE HANDLE COLOR DIAGONAL JAW TYPE JAW THICKNESS 7/16 INCH HANDLE FINISH PLASTIC DIPPED CUT MATERIAL ACSR, SCREW, NAIL, HARDENED WIRE SERIES 2000 MODEL
$
54.32
Qty:
Part #:GE CR104PBT11R5S2
- MUSHROOM 1 3/8 INCH DIA TYPE 30.5 MM SIZE 1NO-1NC CONTACT CONFIGURATION MOMENTARY OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL 508, CSA C22.2, CE APPROVAL NEMA 1/3/3R/3S/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL YES LAMP INCLUDED BAYONET BASE INCANDESCENT LAMP TYPE CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL 120 V AT 50/60 HZ TRANSFORMER LAMP INPUT TYPE 755 LAMP NUMBER RED CAP/LENS COLOR APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F CR104P MODEL
$
96.20
Qty:
Part #:GE CR104PBG01R1
- STANDARD, FLUSH TYPE 30.5 MM SIZE 1NC CONTACT CONFIGURATION MOMENTARY OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/3S/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL RED CAP/LENS COLOR APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE SCREW, FINGER SAFE CR104P MODEL
$
25.20
Qty:
Part #:GE CR104PBG10G1
- STANDARD, FLUSH TYPE 30.5 MM SIZE 1NO CONTACT CONFIGURATION MOMENTARY OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/3S/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL GREEN CAP/LENS COLOR APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE SCREW, FINGER SAFE CR104P MODEL
$
25.20
Qty:
Part #:GE CR104PBG10V1
- STANDARD, FLUSH TYPE 30.5 MM SIZE 1NO CONTACT CONFIGURATION MOMENTARY OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/3S/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL BLUE, BROWN, ORANGE, WHITE CAP/LENS COLOR APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE SCREW, FINGER SAFE CR104P MODEL
$
25.20
Qty:
Part #:GE CR104PBG91G3
- STANDARD, RECESSED TYPE 30.5 MM SIZE 1NO-1NC CONTACT CONFIGURATION MOMENTARY OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/3S/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL GREEN CAP/LENS COLOR APPLICABLE STANDARD IEC, VDE CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F TERMINAL TYPE SCREW, FINGER SAFE CR104P MODEL
$
34.20
Qty:
Part #:GE CR104PBL11R5C8
- MUSHROOM 1 3/8 INCH DIA TYPE 30.5 MM SIZE 1NO-1NC CONTACT CONFIGURATION MAINTAINED OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL YES LAMP INCLUDED 24 V MINIATURE BAYONET BASE INCANDESCENT LAMP TYPE 2 POSITION(S) CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL 24 V AT 50/60 HZ FULL VOLTAGE LAMP INPUT TYPE 1819 LAMP NUMBER RED CAP/LENS COLOR CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F CR104P MODEL
$
88.20
Qty:
Part #:GE CR104PBT11R5C2
- MUSHROOM 1 3/8 INCH DIA TYPE 30.5 MM SIZE 1NO-1NC CONTACT CONFIGURATION MAINTAINED OPERATION TYPE 600 VAC/VDC 10 AMPERE CONTACT RATING UL, CUL, CSA APPROVAL NEMA 1/3/3R/4/4X/12/13 ENCLOSURE NYLON BODY MATERIAL YES LAMP INCLUDED 6 V MINIATURE BAYONET BASE INCANDESCENT LAMP TYPE 2 POSITION(S) CHROMIUM PLATED ZINC INGOT BEZEL MATERIAL 120 V AT 50/60 HZ TRANSFORMER LAMP INPUT TYPE 755 LAMP NUMBER RED CAP/LENS COLOR CONSTRUCTIONAL FEATURE WATER/OIL TIGHT OPERATING TEMPERATURE -13 TO 158 DEG F CR104P MODEL
$
100.20
Qty:
Part #:KLEIN 32477
- SLOTTED, PHILLIPS, SQUARE-RECESS, TORX TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL 10-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 1/4 INCH (SLOTTED), #1, #2 (PHILLIPS/SQUARE-RECESS), T10, T15 (TORX) TIP SIZE STEEL SHANK MATERIAL APPLICABLE STANDARD ASME/ANSI HANDLE TYPE CUSHION GRIP KIT CONTENT 5/16 INCH NUTDRIVER
$
26.44
Qty:
Part #:KLEIN D2000-48
- HEAVY DUTY, HIGH LEVERAGE, HOT-RIVETED LOCKING JOINT, DIAGONAL TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 8 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH ACSR, SCREW, NAIL AND MOST HARDENED WIRE, CUTTING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 1-3/8 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL BLUE HANDLE COLOR ANGLED HEAD JAW TYPE HANDLE LENGTH 7-3/8 INCH JAW THICKNESS 7/16 INCH 2000 MODEL
$
51.02
Qty:
Part #:KLEIN D2000-9NECR
- HOT-RIVETED TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS AND MOST HARDENED WIRE APPLICATION FORGED, PRECISION MACHINED, INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL ROYAL BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH 2000 MODEL
$
77.64
Qty:
Displaying: 1 - 23 of 23 Matching Items