42110
25210
Part #:MILW 48-32-4761
- SQUARE RECESS TYPE HEAT TREATED ALLOY STEEL MATERIAL 1 INCH OVERALL LENGTH #1 BIT SIZE SHOCKWAVE[TM] BRAND PACKAGING TYPE BULK PACKAGING QUANTITY 25 PER PACK
$
0.92
Qty:
Part #:MILW 48-32-4722
- SQUARE RECESS TYPE HEAT TREATED ALLOY STEEL MATERIAL 1 INCH OVERALL LENGTH #2 BIT SIZE SHOCKWAVE[TM] BRAND PACKAGING TYPE BULK PACKAGING QUANTITY 25 PER PACK
$
0.92
Qty:
Part #:MILW 48-32-4784
- TORX TYPE HEAT TREATED STEEL MATERIAL 2 INCH OVERALL LENGTH T20 BIT SIZE SHOCKWAVE[TM] BRAND PACKAGING QUANTITY 25 PER PACK
$
2.06
Qty:
Part #:MILW 48-32-4785
- TORX TYPE HEAT TREATED STEEL MATERIAL 2 INCH OVERALL LENGTH T25 BIT SIZE SHOCKWAVE[TM] BRAND PACKAGING QUANTITY 25 PER PACK
$
2.06
Qty:
Part #:GE CR420KA3
- CR420K SERIES GENERAL PURPOSE PLUG-IN RELAY USED ON 10 AMPERE AT 250 VAC/24 VDC, 7A AT 250 VAC, 1/2 HP AT 240 VAC, 1/3 HP AT 120 VAC CONTACT RATING UL, CSA, CE APPROVAL DIN RAIL/PANEL MOUNTING 3 POLE(S) CARRY CURRENT 10 AMPERE MAXIMUM CONTACT VOLTAGE 220 VAC, 110 VDC CONTACT CONFIGURATION 3PDT CR420K MODEL
$
8.00
Qty:
Part #:LEN 1094906A1416
- LENOX BI-METAL UTILITY WOOD DRILL BITS
EXTREME DURABILITYHigh speed steel cutting edges provide long life in tough applications, includingnail-embedded woodOPTIMIZED FOR CORDLESS DRILLINGSmooth, effortless drilling extends battery lifeFAST CLEAN CUTTINGThree cutting edges enhance chip removal for a fast, clean holeFAST, EASY DRILLINGAgressive lead screw tip pulls the bit through material quickly and effortlessly
$
30.02
Qty:
Part #:LEN 145480081516
- LENOX BI-METAL SHIP AUGER BITS
EXTREME DURABILITYHigh speed steel cutting edge for superior durability in nail-embedded woodLONGER LIFEHigh speed steel screw tip increases wear resistance for extended lifeFAST, EASY DRILLINGUnique parabolic screw tip pulls the bit through material quickly and effortlesslyRESHARPENABLEResharpenable with LENOX Diamond File (product no. 25312DIAF1)
$
83.86
Qty:
Part #:LEN 201809118R
- LENOX LAZER® BI-METAL RECIPROCATING SAW BLADES
POWER BLAST TECHNOLOGY&trade INCREASES BLADE LIFEHigh speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durabilitySTRAIGHTER CUTS IN LARGE DIAMETER MATERIALSTaller blade profile delivers straighter cuts and longer life in the most demanding metal cutting applications
$
39.56
Qty:
Part #:LEN 20562610R
- LENOX GENERAL PURPOSEBI-METAL RECIPROCATINGSAW BLADES
POWER BLAST TECHNOLOGY&trade INCREASES BLADE LIFEHigh speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durabilityLONGER BLADE LIFE & INCREASED VERSATILITYPatented T2&trade Technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
$
22.68
Qty:
Part #:LEN 20566618R
- LENOX METAL CUTTING RECIPROCATING SAW BLADES
POWER BLAST TECHNOLOGY&trade INCREASES BLADE LIFEHigh speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
LONG BLADE LIFE & INCREASED VERSATILITYPatented T2&trade Technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
ADVANCED METAL CUTTING TOOTHFORMSPatented metal cutting TPIs provide faster and more efficient cutting in the widest widest variety of materials including Unistrut, angle iron, black pipe and more
$
22.68
Qty:
Part #:LEN 3001414L
- BI-METALSPEED SLOT®HOLE SAW WITH T3 TECHNOLOGY&trade
IMPROVED METAL CUTTING PERFORMANCEIncreased wall thickness improves durability and minimizes tooth lossOptimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOODLarger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVALSPEED SLOTstaircase design for fast, easy plug ejectionvs. Prior LENOX Generation
$
13.70
Qty:
Part #:LEN 3002222L
- BI-METALSPEED SLOT®HOLE SAW WITH T3 TECHNOLOGY&trade
IMPROVED METAL CUTTING PERFORMANCEIncreased wall thickness improves durability and minimizes tooth lossOptimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOODLarger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVALSPEED SLOTstaircase design for fast, easy plug ejectionvs. Prior LENOX Generation
$
15.78
Qty:
Part #:LEN 3087935PD
- LENOX CARBIDE HOLE CUTTERS
ACCURATE, BURR-FREE HOLESPrecision ground carbide teeth for fast cutting of clean, round holesWILL NOT DAMAGE WORKOver-drill stopper prevents the tool from penetrating beyond the holeSTARTS ON CONTACTSplit point pilot bit for faster penetration and less walking
$
19.52
Qty:
Part #:KLRK 1FAC
- FLAT TYPE POWDER COATED STAMPED METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL DEVICE MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION HUBBELL[R], KILLARK[R] BRAND
$
10.68
Qty:
Part #:KLRK FCLA
- POWDER COATED CAST METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL BOX MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION SINGLE LID LID TYPE HUBBELL[R], KILLARK[R] BRAND APPLICATION INDOOR, OUTDOOR ENVIRONMENTAL CONDITIONS CORROSIVE, DIRT, DUST, WET INCLUSION GASKET FCL MODEL
$
58.80
Qty:
Part #:KLRK OC-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/8 INCH L X 1 5/8 INCH W X 1 5/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE STRAIGHT HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.98
Qty:
Part #:KLRK OLB-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/4 INCH L X 1 5/8 INCH W X 2 1/2 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
21.60
Qty:
Part #:KLRK OLB-3
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 5/8 INCH L X 2 29/32 INCH W X 1 7/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
30.00
Qty:
Part #:KLRK OLB-6
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 10 INCH L X 4 13/16 INCH W X 3 1/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
102.58
Qty:
Part #:KLRK OT-1
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/8 INCH L X 1 3/8 INCH W X 2 INCH H SIZE IMC/RIGID CONDUIT USED ON 1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.56
Qty:
Part #:KLRK OT-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/16 INCH L X 1 5/8 INCH W X 2 3/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
25.38
Qty:
Part #:KLRK TWOLRL-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/16 INCH L X 1 1/2 INCH W X 3 3/4 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION LRL CONFIGURATION 2 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE 90 DEG HUB LOCATION RIGHT/LEFT SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:KLRK TWOT-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/4 INCH L X 1 1/2 INCH W X 2 5/16 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:DOTTIE HS10
- JOBBERS LENGTH TYPE HSS MATERIAL 3-1/8 INCH OVERALL LENGTH STRAIGHT SHANK TYPE 5/32 INCH SHANK SIZE DOTTIE[R] BRAND STANDARD PACKAGE 12 DRILL DIAMETER 5/32 INCH DRILL DIAMETER - DECIMAL .1562 DRILL DIAMETER - DECIMAL - UOM IN DRILL DIAMETER - FRACTIONAL 5/32
$
2.54
Qty:
Displaying: 1 - 24 of 52 Matching Items