3939
2510
Part #:3M 3939-48MMX55M
- ADHESIVE TYPE ADHESIVE RUBBER, POLYETHYLENE FILM BACKING MATERIAL SILVER COLOR 60 YARD 1.88 INCH ISO 9001 APPLICABLE STANDARD PATCHING, BUNDLING, REINFORCING, TABBING, TAPING/SPLICING INSULATION, CAPPING PIPE, SECURING CONDUIT END, MARKING, LABELING, TEMPORARY REPAIR, HEATING, VENTILATING AND AIR CONDITIONING APPLICATION 9 MIL THICKNESS 200 DEG F TEMPERATURE RATING TENSILE STRENGTH 25 POUND PER INCH ELONGATION 17 PERCENT 3939 MODEL
$
26.08
Qty:
Part #:3M 2510-3/4X60FT
-
Straight-cut, woven, cotton-cloth backing is oil-primed and coated with yellow, electrical, insulating varnish
Excellent dielectric strength
Suitable for insulating bus bars, motor leads and service drop connections
Wide and narrow width electrical tape available (0.75 in &ndash 2 in.)
Temperature stable with an operating range of 32°F (0°C) to 220°F (105°C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
ASTM Approved and RoHS 2011/65/EU Compliant
Yellow, varnish coated cotton cloth, no adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
Scotch® Tape 2510 has a straight-cut, woven cotton, cambric fabric backing that provides high tensile strength and ruggedness. This fabric is coated and oil-primed with yellow electrical insulating varnish. This moisture-resistant tape offers excellent dielectric strength with cut-through and puncture resistance. ASTM Approved and RoHS 2011/65/EU Compliant.
$
59.78
Qty:
Part #:KLEIN D203-7
- HOT-RIVETED TYPE STEEL MATERIAL 7-3/16 INCH OVERALL LENGTH 2-7/16 INCH JAW LENGTH 11/16 INCH JAW WIDTH CUTTING, LOOPING, WIRE WRAPPING APPLICATION INDUCTION HARDENED PROCESS PLASTIC HANDLE MATERIAL YELLOW HANDLE COLOR LONG NOSE, KNURLED JAW TYPE JAW THICKNESS 3/8 INCH KNIFE LENGTH 1/2 INCH POINT THICKNESS 3/32 INCH
$
38.56
Qty:
Part #:KLEIN D203-8
- HOT-RIVETED, HEAVY DUTY TYPE STEEL MATERIAL 8-7/16 INCH OVERALL LENGTH 2-5/16 INCH JAW LENGTH 1 INCH JAW WIDTH CUTTING APPLICATION INDUCTION HARDENED PROCESS YELLOW HANDLE COLOR LONG NOSE, SIDE CUTTING JAW TYPE JAW THICKNESS 1/2 INCH KNIFE LENGTH 5/8 INCH HANDLE FINISH PLASTIC DIPPED POINT THICKNESS 1/8 INCH
$
45.96
Qty:
Part #:SEL-SW SS207-7A-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.2 INCH D X 1.312 INCH H SIZE 0.688 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
17.14
Qty:
Part #:SEL-SW SS208-16-BG
- BAT HANDLE TYPE 0.75 INCH W X 1.187 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.468 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
21.88
Qty:
Part #:SEL-SW SS206S-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.107 INCH D X 1.134 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
9.45
Qty:
Part #:SEL-SW SS206A-BG
- BAT HANDLE TYPE 0.634 INCH W X 1.003 INCH D X 1.315 INCH H SIZE 0.64 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED OFF/MOMENTARY ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 15 AMPERE AT 125 VAC, 10 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE SELECTA[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC SS MODEL
$
15.32
Qty:
Displaying: 1 - 8 of 8 Matching Items