Cr420k
370
Part #:BUSS LPS-RK-50SP
- CLASS RK1 TYPE 5.5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VOLT AC, 300 VOLT DC VOLTAGE RATING 1.06 INCH DIAMETER 300 KILOAMP SYMMETRICAL, 100 KILOAMP (DC) INTERRUPTING RATING 50 AMP CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 10 SECOND TIME DELAY AT 500 PERCENT RATED LOAD, DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND CONTACT MATERIAL SILVER PLATED APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH LPS-RK MODEL
$
106.36
Qty:
Part #:GE CR420KA3
- CR420K SERIES GENERAL PURPOSE PLUG-IN RELAY USED ON 10 AMPERE AT 250 VAC/24 VDC, 7A AT 250 VAC, 1/2 HP AT 240 VAC, 1/3 HP AT 120 VAC CONTACT RATING UL, CSA, CE APPROVAL DIN RAIL/PANEL MOUNTING 3 POLE(S) CARRY CURRENT 10 AMPERE MAXIMUM CONTACT VOLTAGE 220 VAC, 110 VDC CONTACT CONFIGURATION 3PDT CR420K MODEL
$
8.00
Qty:
Part #:KLEIN D2000-28
- HOT-RIVETED, HIGH-LEVERAGE, HEAVY DUTY TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH 8-1/16 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTTING APPLICATION INDUCTION HARDENED PROCESS ROYAL BLUE HANDLE COLOR DIAGONAL JAW TYPE JAW THICKNESS 7/16 INCH HANDLE FINISH PLASTIC DIPPED CUT MATERIAL ACSR, SCREW, NAIL, HARDENED WIRE SERIES 2000 MODEL
$
54.32
Qty:
Part #:TB 371
- BULKHEAD, TAPERED FEMALE THREADED TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL (BODY), BUNA-N (O-RING), ELECTRO ZINC PLATED CHROMATE COATED HARDENED STEEL (LOCKNUT/SCREW) MATERIAL 1-5/8 INCH DIA SIZE RIGID CONDUIT/IMC USED ON UL 514B, CSA C22.2 APPROVAL 3/4 INCH TRADE SIZE RAINTIGHT, DUSTTIGHT, WATERTIGHT, HAZARDOUS LOCATION NYLON INSULATED THROAT TYPE TEMPERATURE RATING 105 DEG C
Part #:TB 372
- 1 Inch Hub Connector, Steel Electro Zinc Plated, Nylon Insulated for Use with Rigid/IMC Conduit
Rugged steel/malleable iron construction
Tapered internal threads for water-tight/dust-tight union
Threads relieved to prevent bottoming of conduit, ensuring sound assembly
Recessed sealing ring at box end sealing ring captivated
Hardened steel/malleable iron/copper-free aluminum locknuts designed to provide high quality ground continuity extended reach of locknut permits clamping on thin boxes and enclosures
Insulated throat, insulates conductors, prevents abrasion and thinning of conductor insulation, reduces wire pull effort
To positively bond conduit to box or enclosure.
Suitable for hazardous locations use in Class I, Division 2 Class II, Division 1&2 Class III, Division 1 & 2 per NEC 501-4(b) 502-4 (a) and 503-3 (a).
Suitable for hazardous locations use in Class II, Groups E, F, G & Class III locations per CEC 18-202 18-252 18-302 18-352.
When used with neoprene O-ring, provides watertight threaded hub on enclosures
UL Listed 105 degree C
Part #:TB 373
- BULKHEAD, TAPERED FEMALE THREADED TYPE ZINC ELECTROPLATED CHROMATE COATED MALLEABLE IRON HUB, ZINC ELECTROPLATED CHROMATE COATED HARDENED STEEL LOCKNUT/SCREW, NEOPRENE O-RING MATERIAL 2-9/16 INCH DIA SIZE RIGID CONDUIT/IMC USED ON UL 514B, CSA C22.2 APPROVAL LOCKNUT BONDING/GROUNDING SCREW 1-1/8 INCH TRADE SIZE DUSTTIGHT, RAINTIGHT, WATERTIGHT, HAZARDOUS LOCATION NYLON INSULATED THROAT TYPE APPLICABLE STANDARD NFPA 70, JIC EGP1, JIC EMP 1, A-A-50553 ENCLOSURE NEMA FB-1 MAXIMUM WALL THICKNESS 5/16 INCH TEMPERATURE RATING 105 DEG C
Part #:KLEIN D2000-48
- HEAVY DUTY, HIGH LEVERAGE, HOT-RIVETED LOCKING JOINT, DIAGONAL TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 8 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH ACSR, SCREW, NAIL AND MOST HARDENED WIRE, CUTTING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 1-3/8 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL BLUE HANDLE COLOR ANGLED HEAD JAW TYPE HANDLE LENGTH 7-3/8 INCH JAW THICKNESS 7/16 INCH 2000 MODEL
$
51.02
Qty:
Part #:BUSS LPS-RK-200SP
- CLASS RK1 TYPE 9.63 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VAC/300 VDC VOLTAGE RATING 1.66 INCH DIAMETER 300 KILOAMPERE (SYMMETRICAL), 100 KILOAMPERE (DC) INTERRUPTING RATING 200 AMPERE CURRENT RATING BLADE TERMINAL TYPE 10 SEC TIME DELAY (AT 500 PERCENT RATED LOAD), DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH SERIES LPS-RK MODEL
$
535.94
Qty:
Part #:BUSS LPS-RK-25SP
- CLASS RK1 TYPE 5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VAC/300 VDC VOLTAGE RATING 0.81 INCH DIAMETER 300 KILOAMPERE (SYMMETRICAL), 100 KILOAMPERE (DC) INTERRUPTING RATING 25 AMPERE CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 8 SEC TIME DELAY (AT 500 PERCENT RATED LOAD), DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH SERIES LPS-RK MODEL
$
75.26
Qty:
Part #:BUSS LPS-RK-30SP
- CLASS RK1 TYPE 5 INCH UL 248-12, CSA C22.2, CE APPROVAL 600 VAC/300 VDC VOLTAGE RATING 0.81 INCH DIAMETER 300 KILOAMPERE (SYMMETRICAL), 100 KILOAMPERE (DC) INTERRUPTING RATING 30 AMPERE CURRENT RATING FERRULE WITH GROOVED RING TERMINAL TYPE 8 SEC TIME DELAY (AT 500 PERCENT RATED LOAD), DUAL ELEMENT, NON-INDICATING CHARACTERISTICS LOW-PEAK[TM] BRAND APPLICATION LARGE DISTRIBUTION SWITCHBOARD, POWER PANELBOARD, MOTOR CONTROL CENTER, MACHINERY DISCONNECT SWITCH SERIES LPS-RK MODEL
$
75.26
Qty:
Part #:KLEIN D2000-9NECR
- HOT-RIVETED TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS AND MOST HARDENED WIRE APPLICATION FORGED, PRECISION MACHINED, INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL ROYAL BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH 2000 MODEL
$
77.64
Qty:
Displaying: 1 - 11 of 11 Matching Items