Channel, Strut & Fittings
27.36 Inch L Chromated Zinc Coated Sheet Steel System Chassis
View:
Active Filters :
Part #:VICTOR 10747-S
- STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 125 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.12
Qty:
Part #:ARL EMT50
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 0.84 INCH DIAMETER 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.15
Qty:
Part #:ARL EMT75
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.056 INCH DIAMETER 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.22
Qty:
Part #:ARL EMT100
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.28 INCH DIAMETER 100 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.66
Qty:
Part #:ARL EMT125
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.66 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
1.15
Qty:
Part #:ARL EMT250
- 1.225 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 3.062 INCH DIAMETER 25 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
4.77
Qty:
Part #:ARL EMT400
- 1.233 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 4.815 INCH DIAMETER 25 STANDARD PACKAGE 4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
8.61
Qty:
$
1.96
Qty:
$
4.10
Qty:
$
4.60
Qty:
Part #:STL-CTY RC-1
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 100 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 1 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:TB 5223
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:HUBW CR5252IG
- DUPLEX TYPE REINFORCED THERMOPLASTIC POLYESTER BASE, NYLON FACE MATERIAL ORANGE COLOR 5-15R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498, UL FS, CSA C22.2 APPROVAL 125 V VOLTAGE RATING 15 AMPERE CURRENT RATING ISOLATED GROUND 2 POLE(S) HEAT RESISTANT, IMPACT RESISTANT BACK, SIDE WIRING HUBBELL[R] BRAND CONTACT MATERIAL 0.031 INCH BRONZE OPERATING TEMPERATURE -40 TO 75 DEG C
$
21.32
Qty:
Part #:MADISON LG-141-2
- DIE-CAST ZINC, ALUMINUM COVER, NEOPRENE GASKET MATERIAL RIGID CONDUIT USED ON THREADED FEMALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
4.88
Qty:
Part #:STL-CTY TL202SC
- DIE-CAST ZINC MATERIAL 1.24 INCH DIA SIZE EMT CONDUIT USED ON SET SCREW INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEG BEND ANGLE TL MODEL
Part #:STL-CTY TC211SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-1/4 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1 INCH DIAMETER 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC212SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-11/32 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-5/32 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC213SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-29/64 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-15/32 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC223SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-9/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-27/64 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
Part #:STL-CTY TC224SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-15/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-13/16 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
4.18
Qty:
Part #:STL-CTY TC225SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-9/32 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-3/64 INCH DIAMETER 40 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
5.57
Qty:
Part #:STL-CTY TC226SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-33/64 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-17/32 INCH DIAMETER 20 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
6.97
Qty:
Part #:STL-CTY RC-3/4
- RIGHT ANGLE TYPE MALLEABLE IRON MATERIAL GALVANIZED FINISH CSA APPROVAL 50 PER CARTON STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH CONDUIT SIZE IBERVILLE[R] BRAND RC MODEL
Part #:S-STRUT AP-232SQ-EG
- Connector, Square Post Base, Post Height 3-1/2 Inches, Post Length 1-11/16 Inch, Width 1- 11/16 Inch, 4 Holes, Hole Diameter 3/4 Inch, Base Size 6 Inches x 6 Inches, Electro Galvanized Steel &bull Excellent corrosion reisistance
Displaying: 1 - 24 of 76 Matching Items