2510
200
Part #:3M 2510-3/4X60FT
-
Straight-cut, woven, cotton-cloth backing is oil-primed and coated with yellow, electrical, insulating varnish
Excellent dielectric strength
Suitable for insulating bus bars, motor leads and service drop connections
Wide and narrow width electrical tape available (0.75 in &ndash 2 in.)
Temperature stable with an operating range of 32°F (0°C) to 220°F (105°C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
ASTM Approved and RoHS 2011/65/EU Compliant
Yellow, varnish coated cotton cloth, no adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
Scotch® Tape 2510 has a straight-cut, woven cotton, cambric fabric backing that provides high tensile strength and ruggedness. This fabric is coated and oil-primed with yellow electrical insulating varnish. This moisture-resistant tape offers excellent dielectric strength with cut-through and puncture resistance. ASTM Approved and RoHS 2011/65/EU Compliant.
$
59.78
Qty:
Part #:S-STRUT AB227
- ANGLE TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 1-5/8 INCH OVERALL WIDTH CHANNEL APPLICATION 1/4 INCH THICKNESS 9/16 INCH HOLE HOLE/SLOT SIZE 2-HOLE NUMBER OF HOLES/SLOTS HOLE SPACING ON CENTER 1-7/8 INCH HOLE SPACING FROM END 13/16 INCH 200 MODEL
Part #:S-STRUT H104-3/8X6
- STRAIGHT TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 6 FT OVERALL LENGTH 3/8 INCH NOMINAL DIAMETER 16 TPI CSA APPLICABLE STANDARD LOAD RATING 610 LB H104 MODEL
Part #:S-STRUT H104-1/4X6
- STRAIGHT TYPE 6 FT OVERALL LENGTH 72 OVERALL LENGTH IN INCH 1/4 INCH NOMINAL DIAMETER 20 TPI 1/4 NOMINAL DIAMETER - FRACTIONAL .25 NOMINAL DIAMETER - DECIMAL SUPERSTRUT[R] BRAND LOAD RATING 150 LB FINISH/COATING GOLDGALV[R] NOMINAL DIAMETER - DECIMAL - UOM IN OVERALL LENGTH IN INCH - UOM IN H-104 MODEL
Part #:S-STRUT H104-1/2X6
- STRAIGHT TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 6 FT OVERALL LENGTH 1/2 INCH NOMINAL DIAMETER 13 TPI CSA APPLICABLE STANDARD LOAD RATING 1130 LB H104 MODEL
Part #:S-STRUT AP232
- U POST, SQUARE BASE TYPE STEEL MATERIAL GOLDGALV FINISH 3-1/2 INCH POST HEIGHT 1 CHANNEL(S) CENTERED, OFFSET CHANNEL POSITION 4 PAD MOUNTING HOLE(S) 3/4 INCH PAD MOUNTING HOLE SIZE 6 CHANNEL MOUNTING HOLE(S) 200 MODEL
Displaying: 1 - 6 of 6 Matching Items