2510
100
Part #:VICTOR 10014-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 3/4 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.35
Qty:
Part #:VICTOR 10015-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.093 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.53
Qty:
Part #:VICTOR 10016-S
- STEEL MATERIAL 3/4 INCH RIGID CONDUIT USED ON 250 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.093 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.98
Qty:
Part #:VICTOR 10043-S
- STEEL MATERIAL 5/8 INCH EMT CONDUIT USED ON 1000 PER CARTON STANDARD PACKAGE 1/2 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.22
Qty:
Part #:VICTOR 10045-S
- STEEL MATERIAL 3/4 INCH EMT CONDUIT USED ON 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.34
Qty:
Part #:3M 2510-3/4X60FT
-
Straight-cut, woven, cotton-cloth backing is oil-primed and coated with yellow, electrical, insulating varnish
Excellent dielectric strength
Suitable for insulating bus bars, motor leads and service drop connections
Wide and narrow width electrical tape available (0.75 in &ndash 2 in.)
Temperature stable with an operating range of 32°F (0°C) to 220°F (105°C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
Withstands a temperature range of 32 to 221 degrees F (0 to 105 degrees C)
ASTM Approved and RoHS 2011/65/EU Compliant
Yellow, varnish coated cotton cloth, no adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
Scotch® Tape 2510 has a straight-cut, woven cotton, cambric fabric backing that provides high tensile strength and ruggedness. This fabric is coated and oil-primed with yellow electrical insulating varnish. This moisture-resistant tape offers excellent dielectric strength with cut-through and puncture resistance. ASTM Approved and RoHS 2011/65/EU Compliant.
$
59.78
Qty:
Part #:KLEIN D213-9NE
- HIGH LEVERAGE, HOT-RIVETED JOINT, LOCKING JOINT TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH COPPER, ALUMINUM AND OTHER SOFT METAL, CUTTING, GRIPPING APPLICATION FORGED, PRECISION MACHINED, HARDENED, TEMPERED PROCESS 1-3/8 INCH CAPACITY PLASTIC DIPPED STEEL HANDLE MATERIAL DARK BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE KNIFE LENGTH 25/32 INCH HANDLE LENGTH 5-11/16 INCH JAW THICKNESS 5/8 INCH
$
51.38
Qty:
Part #:KLEIN D213-9NE-CR
- HOT-RIVETED TYPE STEEL MATERIAL POLISHED, BLACK-OXIDE FINISH FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, HARDENED WIRE, CRIMPING, GRIPPING APPLICATION INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL YELLOW HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH
$
60.50
Qty:
Part #:VICTOR 10044-S
- STEEL MATERIAL 5/8 INCH EMT CONDUIT USED ON 1000 PER CARTON STANDARD PACKAGE 3/4 INCH TRADE SIZE 9/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.062 INCH INSTALLATION 1 HOLE SNAP ON 100 MODEL
$
0.23
Qty:
Part #:MADISON CBGI-75
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
13.69
Qty:
Part #:S-STRUT A100-1/2
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 1/2 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 13 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.358 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:S-STRUT B100-1/4
- WITH SPRING TYPE MILD STEEL MATERIAL GOLD GALVANIZED FINISH 1/4 INCH NOMINAL DIAMETER 20 TPI CASE HARDENED PROCESS USED ON B SERIES CHANNEL AND INSERT 100 MODEL
Part #:S-STRUT B100-3/8
- SHORT SPRING TYPE STEEL MATERIAL SILVER GALVANIZED FINISH 3/8 INCH NOMINAL DIAMETER USED ON B SERIES CHANNELS AND INSERT 100 MODEL
Part #:S-STRUT H119-3/8
- STANDARD, HEX TYPE STEEL MATERIAL GOLD GALVANIZED FINISH 1-1/8 INCH 3/8 INCH NOMINAL DIAMETER APPLICATION CHANNEL H119 MODEL
Part #:MADISON CBGI-50
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
3.65
Qty:
Part #:S-STRUT A100-1/4
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 1/4 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 20 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.238 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Part #:S-STRUT A100-3/8
- WITH SPRING TYPE MILD STEEL MATERIAL GOLD GALVANIZED FINISH 3/8 INCH NOMINAL DIAMETER 16 TPI CASE HARDENED PROCESS SUPERSTRUT. BRAND USED ON A/C SERIES CHANNEL AND INSERT 100 MODEL
Part #:S-STRUT A100-5/16
- WITH SPRING TYPE GRADE 2 MILD STEEL MATERIAL SILVERGALV/ELECTROGALVANIZED FINISH 5/16 INCH NOMINAL DIAMETER UNC-2A THREAD SERIES 18 TPI CASE HARDENED PROCESS OVERALL DIMENSION 1.338 INCH WIDTH X 0.358 INCH HEIGHT USED ON A/C SERIES CHANNEL AND INSERT
Displaying: 1 - 18 of 18 Matching Items