73112
2210
View:
Active Filters :
- Commodity Code: 2210 73112
- Main Category: Fittings Lamps / Ballasts
Part #:ARL 510
- MALE THREADED, HEX HEAD TYPE DIE-CAST ZINC MATERIAL 1.375 INCH RIGID/IMC CONDUIT USED ON UL, CSA APPROVAL 5.42 INCH DIAMETER 5 STANDARD PACKAGE 4 INCH TRADE SIZE
$
90.78
Qty:
Part #:ARL 645
- PORCELAIN WIRE HOLDER MATERIAL CLAMP ON INSTALLATION 2 INCH PIPE SIZE STANDARD PACKAGE 5
$
43.56
Qty:
Part #:ARL 501L
- DIE CAST ZINC MATERIAL 0.9 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1.055 INCH DIAMETER 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSTALLATION THREADED MALE/HEX HEAD 50 MODEL
$
2.93
Qty:
Part #:ARL 720B
- SOLID BRASS BODY, STEEL SCREW MATERIAL 2.43 INCH W SIZE (1) BARE WIRE TO PIPE USED ON (2) SCREW CONNECTOR TO PIPE, (1) SCREW WIRE CONNECTOR INSTALLATION UL 467, UL 910F, CSA APPROVAL 10 TO 2 AWG CONDUCTOR SIZE 1/2 TO 1 INCH IPS SIZE APPLICABLE STANDARD NEMA FB-1 72 MODEL
$
6.20
Qty:
Part #:GE GE296HOMV-N-DIYB-120
- 11.8 INCH L X 2.15 INCH W X 1.61 INCH H SIZE -20 DEG F MIN. STARTING TEMPERATURE 15 PERCENT MAX. THD 1/2 LAMP(S) F48T12/HO, F96T12/HO, F70T8, F72T12/HO, F60T12/HO, F96T12/HO/WM LAMP TYPE 60/70/48/72/96 W LAMP WATTAGE 120 TO 277 V INPUT VOLTAGE 0.42 TO 1.43 AMPERE INPUT CURRENT SERIES WIRING 104 TO 196 W INPUT POWER RAPID STARTING TYPE LINEAR LAMP STYLE 0.95 TO 0.99 POWER FACTOR 0.83 TO 0.99 BALLAST FACTOR PROLINE BRAND ROHS COMPLIANT APPLICABLE STANDARD FCC APPROVAL UL, CSA
$
237.92
Qty:
Part #:GE GE454MVPS90F
- -20 DEG F MIN. STARTING TEMPERATURE 24 PERCENT MAX. THD 50/60 HZ FREQUENCY RATING UL, CUL, FCC APPROVAL 1 TO 4 LAMP(S) F54T5/47W, F54T5/HO, F54T5/WM, F54T5WM, F58T8, FT50W/4P, FT55W/4P LAMP TYPE 54 W LAMP WATTAGE 120 TO 277 V INPUT VOLTAGE 0.54/0.91/0.26/0.4/1.36/0.59/1.73/0.75 AMPERE INPUT CURRENT PARALLEL WIRING NORMAL/HIGH OUTPUT CIRCUIT TYPE 65/108/66/162/160/206/203 W INPUT POWER PROGRAMMED RAPID STARTING TYPE 0.99/0.89/0.97/1/0.98 POWER FACTOR 0.91/0.88/0.86 BALLAST FACTOR ULTRASTART[R] BRAND
$
63.56
Qty:
Part #:APP HUB-150
- TAPERED THREADED TYPE ZINC ELECTROPLATED DICHROMATE DIP ALUMINUM POLYMER ENAMELED MALLEABLE IRON BODY, NEOPRENE GASKET MATERIAL 2.63 INCH DIA X 1.83 INCH L SIZE RIGID CONDUIT/IMC USED ON UL, CSA APPROVAL LOCKING EDGE OF BODY 1-1/2 INCH TRADE SIZE FLAME RESISTANT INSULATED THROAT TYPE APPLICABLE STANDARD NEMA FB-1 APPLICATION SUITABLE FOR SERVICE ENTRANCE, GENERAL PURPOSE FITTING HUB MODEL
$
33.46
Qty:
Part #:MADISON LG-141-2
- DIE-CAST ZINC, ALUMINUM COVER, NEOPRENE GASKET MATERIAL RIGID CONDUIT USED ON THREADED FEMALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
4.88
Qty:
Part #:MADISON CBGI-75
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
13.69
Qty:
Part #:MADISON CBGI-50
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
3.65
Qty:
Part #:ARL 611
- 11 INCH 11 LENGTH IN INCH 5 STANDARD PACKAGE 613/617 INSULATOR TYPE 2 OR 3 INSULATOR(S) FINISH GALVANIZED LENGTH IN INCH - UOM IN
$
13.94
Qty:
Part #:ARL LPCG507Z
- STRAIGHT TYPE DIE CAST ZINC MATERIAL UL 514-B, CSA APPROVAL LIQUIDTIGHT, OIL TIGHT, STRAIN RELIEF APPLICATION 1/2 INCH THREAD SIZE 0.385 TO 0.75 INCH CORD SIZE APPLICABLE STANDARD FEDERAL SPECIFICATION NEMA, WF-406B STANDARD PACKAGE 100
$
7.00
Qty:
Part #:ARL LPCG757Z
- STRAIGHT TYPE DIE CAST ZINC MATERIAL UL 514-B, CSA APPROVAL LIQUIDTIGHT, OIL TIGHT, STRAIN RELIEF APPLICATION 3/4 INCH THREAD SIZE 0.385 TO 0.75 INCH CORD SIZE APPLICABLE STANDARD FEDERAL SPECIFICATION NEMA, WF-406B STANDARD PACKAGE 50
$
7.71
Qty:
Displaying: 1 - 13 of 13 Matching Items