Nema Types 4, 4x, 12 & 13 Non-Metallic Enclosures, Boxes & Cabinets
Fastening Hardware - Anchors & Fasteners
View:
Part #:CARLON E989RRR-UPC
- MOLDED PPO THERMOPLASTIC MATERIAL 6 INCH 6 INCH 6 INCH DIRECT BURIAL INSTALLATION UL, CSA APPROVAL NEMA 4/4X/6P ENCLOSURE SCREW COVER TYPE 8 STANDARD PACKAGE
Part #:CARLON E381D-CAR
- T TYPE NON-METALLIC MATERIAL GRAY COLOR 1/2 INCH HUB SIZE 3 HUB(S) 1 GANG(S) UL APPROVAL SURFACE MOUNTING FEET MOUNTING HARDWARE (1) BACK, (1) EACH END HUB LOCATION ENVIRONMENTAL CONDITIONS CORROSION RESISTANT
Part #:ARL FS8141
- PLASTIC MATERIAL TEXTURED FINISH 3.312 INCH 3.312 WIDTH IN INCH 5.093 INCH 5.093 HEIGHT IN INCH 2.056 INCH 2.056 DEPTH IN INCH 1 GANG(S) UL APPROVAL 18.6 CU INCH CAPACITY 1/2 INCH LAP STANDARD PACKAGE 25 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN FS MODEL
$
7.05
Qty:
Part #:ARL MB8
- CEILING FAN/FIXTURE TYPE 0.74 INCH .74 DEPTH IN INCH 8 DIAMETER IN INCH ROUND SHAPE 10 APPROVAL 8 INCH DIAMETER (2) #10 X 3 INCH WOOD SCREW, (1) #8 X 1 1/2 INCH WOOD SCREW MOUNTING UL, CSA STANDARD PACKAGE 6.1 CU INCH CAPACITY DEPTH IN INCH - UOM IN DIAMETER IN INCH - UOM IN
$
22.56
Qty:
Part #:STAH DS141206HW
- ONE DOOR TYPE FIBERGLASS REINFORCED POLYESTER, PVC MATERIAL 13.86 INCH 13.86 WIDTH IN INCH 15.49 INCH 15.49 HEIGHT IN INCH 6.34 INCH 6.34 DEPTH IN INCH UL 50, UL 508, CUL 50, CUL 508, CSA C22.2 APPROVAL NEMA 1/3/3S/4X/12/13, IP66 ENCLOSURE HINGED, SCREW ON COVER TYPE BP-1412 NOT INCLUDED BACK PANEL DIAMONDSHIELD[T], STAHLIN[R] BRAND APPLICABLE STANDARD IEC 60529 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
335.64
Qty:
closeout
Part #:TB 5223
- CLOSEOUTS Only 27 Left!
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:DOTTIE 14H114
- 1-1/4 INCH ANCHOR LENGTH 3/16 INCH DRILL SIZE HEX HEAD TYPE 1/4 INCH ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE SLOTTED APPLICATION CONCRETE HI-LOW THREAD INCLUDES DRILL
$
0.67
Qty:
Part #:DOTTIE 14H134
- 1-3/4 INCH ANCHOR LENGTH 3/16 INCH DRILL SIZE HEX HEAD TYPE 1/4 INCH ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE SLOTTED APPLICATION CONCRETE HI-LOW THREAD INCLUDES DRILL
$
0.78
Qty:
Part #:DOTTIE K6CO
- TAPPER TYPE 1 INCH SCREW LENGTH #10 SCREW SIZE 1/4 INCH DRILL SIZE #8-10-12 ANCHOR SIZE LH DOTTIE[R] BRAND DRIVE TYPE PHILLIPS/SLOTTED COLOR RED INCLUDES (100) SHEET METAL SCREW, (100) ANCHOR, (1) CARBIDE MASONRY DRILL
$
31.78
Qty:
Displaying: 1 - 9 of 9 Matching Items