Gfci
Emt Fittings
View:
Active Filters :
- Type: Emt Fittings Gfci
Part #:VICTOR 10747-S
- STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 125 PER CARTON STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 13/32 INCH HOLE/BOLT SIZE MATERIAL THICKNESS 0.125 INCH INSTALLATION 1 HOLE SNAP ON 107 MODEL
$
1.12
Qty:
Part #:ARL EMT50
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 0.84 INCH DIAMETER 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.15
Qty:
Part #:ARL EMT75
- 0.531 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.056 INCH DIAMETER 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.22
Qty:
Part #:ARL EMT100
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.28 INCH DIAMETER 100 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
0.66
Qty:
Part #:ARL EMT125
- 0.625 INCH EMT CONDUIT USED ON UL 514B, CSA APPROVAL 1.66 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
1.15
Qty:
Part #:ARL EMT250
- 1.225 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 3.062 INCH DIAMETER 25 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
4.77
Qty:
Part #:ARL EMT400
- 1.233 INCH RIGID CONDUIT/EMT CONDUIT/IMC USED ON UL 514B, CSA APPROVAL 4.815 INCH DIAMETER 25 STANDARD PACKAGE 4 INCH TRADE SIZE INSULATED THROAT TYPE INSTALLATION PRESS FIT EMT MODEL
$
8.61
Qty:
Part #:KLEIN RT210
-
Detects the most common wiring problems in standard and GFCI receptacles
Works on GFI outlets and confirms operation of the ground fault protective device
Conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Built to withstand a 6.6-foot (2m) drop
Operating temp 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
Nominal Voltage 110/125V AC at 50/60Hz in 3-wire outlet
$
17.54
Qty:
Part #:TB 5223
- COMPRESSION, STRAIGHT TYPE ELECTRO ZINC PLATED CHROMATE COATED STEEL MATERIAL 1-27/32 INCH EMT CONDUIT USED ON UL 514B, CSA C22.2 APPROVAL 1-21/64 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE RAINTIGHT NYLON INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408, NEMA, NFPA 70
Part #:MADISON LG-141-2
- DIE-CAST ZINC, ALUMINUM COVER, NEOPRENE GASKET MATERIAL RIGID CONDUIT USED ON THREADED FEMALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
4.88
Qty:
Part #:STL-CTY TL202SC
- DIE-CAST ZINC MATERIAL 1.24 INCH DIA SIZE EMT CONDUIT USED ON SET SCREW INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEG BEND ANGLE TL MODEL
Part #:STL-CTY TC211SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-1/4 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1 INCH DIAMETER 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC212SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-11/32 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-5/32 INCH DIAMETER 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC213SC
- COMPRESSION TYPE DIE-CAST ZINC MATERIAL 1-29/64 INCH EMT CONDUIT USED ON UL 514-B, CSA C22.2 APPROVAL 1-15/32 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552/A-A-50553/WC-586, NEMA FB 1 TC MODEL
Part #:STL-CTY TC223SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-9/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-27/64 INCH DIAMETER 200 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
Part #:STL-CTY TC224SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1-15/16 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 1-13/16 INCH DIAMETER 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
4.18
Qty:
Part #:STL-CTY TC225SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-9/32 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-3/64 INCH DIAMETER 40 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
5.57
Qty:
Part #:STL-CTY TC226SC
- 1-PIECE, SET SCREW, STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2-33/64 INCH EMT CONDUIT USED ON UL, CSA APPROVAL 2-17/32 INCH DIAMETER 20 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE TIGHT NON-INSULATED THROAT TYPE APPLICATION COMMERCIAL
$
6.97
Qty:
Displaying: 1 - 18 of 18 Matching Items