Cable & Cord Grips
Aluminum Conduit Bodies - Conduit Bodies & Covers - Aluminum
View:
Active Filters :
- Commodity Description: Aluminum Conduit Bodies - Conduit Bodies & Covers - Aluminum Cable & Cord Grips
Part #:TB 2522
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-1/8 INCH DIAMETER X 1-21/32 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE MINIMUM THROAT DIAMETER 9/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2534
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2922
- STRAIGHT TYPE STEEL BODY/GLAND NUT/GRIP, RUBBER BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF THROAT SIZE 47/64 INCH DIA
Part #:KLRK 1FAC
- FLAT TYPE POWDER COATED STAMPED METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL DEVICE MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION HUBBELL[R], KILLARK[R] BRAND
$
10.68
Qty:
Part #:KLRK FCLA
- POWDER COATED CAST METAL MATERIAL 1 GANG(S) UL, CSA APPROVAL BOX MOUNTING (1) DUPLEX RECEPTACLE DEVICE TYPE VERTICAL MOUNTING POSITION SINGLE LID LID TYPE HUBBELL[R], KILLARK[R] BRAND APPLICATION INDOOR, OUTDOOR ENVIRONMENTAL CONDITIONS CORROSIVE, DIRT, DUST, WET INCLUSION GASKET FCL MODEL
$
58.80
Qty:
Part #:KLRK OC-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/8 INCH L X 1 5/8 INCH W X 1 5/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE STRAIGHT HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.98
Qty:
Part #:KLRK OLB-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/4 INCH L X 1 5/8 INCH W X 2 1/2 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
21.60
Qty:
Part #:KLRK OLB-3
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 5/8 INCH L X 2 29/32 INCH W X 1 7/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
30.00
Qty:
Part #:KLRK OLB-6
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 10 INCH L X 4 13/16 INCH W X 3 1/8 INCH H SIZE IMC/RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
102.58
Qty:
Part #:KLRK OT-1
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 5 3/8 INCH L X 1 3/8 INCH W X 2 INCH H SIZE IMC/RIGID CONDUIT USED ON 1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
20.56
Qty:
Part #:KLRK OT-2
- ELECTROSTATIC POWDER COATED COPPER FREE ALUMINUM BODY, STAINLESS STEEL SCREW MATERIAL 6 1/16 INCH L X 1 5/8 INCH W X 2 3/16 INCH H SIZE IMC/RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL CAST, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND O MODEL
$
25.38
Qty:
Part #:KLRK TWOLRL-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/16 INCH L X 1 1/2 INCH W X 3 3/4 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION LRL CONFIGURATION 2 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE 90 DEG HUB LOCATION RIGHT/LEFT SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:KLRK TWOT-2
- ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM MATERIAL 5 3/4 INCH L X 1 1/2 INCH W X 2 5/16 INCH H SIZE EMT CONDUIT USED ON 3/4 INCH HUB SIZE SET SCREW (EMT) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL ALUMINUM, STEEL/IRON, SCREW ON COVER TYPE TEE HUB LOCATION SIDE ACCESS OPENING HUBBELL[R], KILLARK[R] BRAND TWO MODEL
$
29.76
Qty:
Part #:TB 2209
- 45 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-13/32 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2269
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.375 TO 0.5 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2270
- 90 DEG TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-1/8 INCH DIA SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE CONSTRUCTION FEATURE WATERTIGHT OPERATING TEMPERATURE 105 DEG C 2200 MODEL
Part #:TB 2524
- STRAIGHT TYPE DIE CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL LIQUIDTIGHT, STRAIN RELIEF, DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.5 TO 0.625 INCH CORD SIZE OPERATING TEMPERATURE 105 DEG C SERIES 2520 MODEL
Part #:TB 2525
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1/2 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2530
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.125 TO 0.25 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2531
- STRAIGHT TYPE DIE-CAST ZINC BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-3/4 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.25 TO 0.375 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2535
- STRAIGHT MALE TYPE DIE-CAST ZINC (BODY), STEEL (GLAND NUT), NEOPRENE (BUSHING) MATERIAL 1-3/8 INCH DIAMETER X 1-3/4 INCH LENGTH SIZE UL, CSA APPROVAL LIQUID TIGHT, STRAIN RELIEF, WATER TIGHT, DRY/WET/HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.625 TO 0.75 INCH CORD SIZE MINIMUM THROAT DIAMETER 13/16 INCH OPERATING TEMPERATURE 105 DEG C
Part #:TB 2536
- STRAIGHT TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 1-3/8 INCH DIA X 1-15/16 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.75 TO 0.88 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Part #:TB 2674
- STRAIGHT TYPE MOLDED BLACK NYLON BODY, MOLDED THERMOPLASTIC GLAND AND SEGMENTED CHUCK, MOLDED NEOPRENE BUSHING MATERIAL 1.57 INCH DIA X 3 INCH L SIZE UL, CSA APPROVAL HAZARDOUS LOCATION APPLICATION 3/4 INCH THREAD SIZE 0.56 TO 0.69 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, STRAIN RELIEF, CORROSION RESISTANT APPLICABLE STANDARD FEDERAL SPECIFICATION A-A-50552, A-A-50553, WC-586 OPERATING TEMPERATURE -34 TO 105 DEG C
Part #:TB 2565
- STRAIGHT TYPE MALLEABLE IRON BODY, STEEL GLAND NUT, NEOPRENE BUSHING MATERIAL 2-3/4 INCH DIA X 2-5/8 INCH L SIZE UL, CSA APPROVAL DRY/HAZARDOUS/WET LOCATION APPLICATION 1-1/2 INCH THREAD SIZE 1.375 TO 1.625 INCH CORD SIZE CONSTRUCTION FEATURE LIQUIDTIGHT, WATERTIGHT, STRAIN RELIEF OPERATING TEMPERATURE 105 DEG C
Displaying: 1 - 24 of 37 Matching Items